Dxv Modulus D21050036LH Handleiding

Dxv Wastafel Modulus D21050036LH

Lees hieronder de 📖 handleiding in het Nederlandse voor Dxv Modulus D21050036LH (4 pagina's) in de categorie Wastafel. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
- 1 -
INSTALLATION INSTRUCTIONS
S A V E F O R F U T U R E U S E
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017 7302323-100 (5/17)
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing
supply stores. It is essential that the tools and materials be on hand before work has begun.
INSTALLATION PROCEDURES
Typical installation includes cabinet support preparation, installation of faucet and pop-up drain, connection of exible water
supply lines, attachment of lavatory to cabinet, sizing and installation of drain and water supplies.
REPLACEMENT USE
When replacing an original unit be sure to shut off water supply before removing the lavatory or disconnecting
water supply lines and drain ttings. Original supplies and shutoff valves should be replaced on installation.
LAVATORY MODELS
Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
!
21 Model D21040021 Series"
36 Model D21045036 Series"
55 Model D21060055 Series"
36 Model D21050036 Series— Concrete"
DXV Modulus
Lavatory
Adjustable Wrench
Channel Locks
Regular Screwdriver
Phillips Screwdriver
10'
Saber Saw
Pipe Wrench Level
Tubing Cutter Square
Tape Measure
Electric
Drill
1234567891011
12345678910
11 12 1 3 14 15 16 1 7 18 19 2 0 21 22 2 3 24
Hacksaw
Sealant
55 Model"
D21060055 Series
D: 21" (533 mm)
W: 55" (1397 mm)
D
w
D
w
36 Model"
D21045036 Series
D: 21" (533 mm)
W: 36" (914 mm)
D
W
21 Model"
D21040021 Series
D: 21" (533 mm)
W: 21" (533 mm)
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 227-2734
www.DXV.com
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: 1-800-395-1498
www.DXV.ca
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx
- 2 - 7302323-100 (5/17)
ROUGHING-IN DIMENSIONS:
21"
(533 mm)
21"
(533 mm)
8"
(203 mm) 16"
(406 mm)
5-1/16"
(128 mm)
2-3/8"
(60 mm)
1-1/16"
(26 mm)
15/16"
(24 mm)
1-1/16"
(26 mm)
1-1/16"
(26 mm)
11/16"
(18 mm)
4-1/8"
(104 mm)
4-9/16"
(116 mm)
12-1/4"
(311 mm)
2-15/16"
(75 mm)
1-3/4" (45 mm)
2-11/16" (68 mm)
1-1/2"
(38 mm)
21"
(533 mm)
36"
(914 mm)
12-1/2"
(318 mm)
16"
(406 mm) 36"
(914 mm)
12"
(305 mm)
5-1/16"
(128 mm)
2-3/8"
(60 mm)
4-1/2"
(115 mm)
15/16"
(24 mm)
1-1/16"
(26 mm)
1-1/16"
(26 mm)
11/16"
(18 mm)
4-1/8"
(104 mm)
4-9/16"
(116 mm)
12-1/4"
(311 mm)
15-9/16"
(396 mm)
2-15/16"
(75 mm)
1-3/4" (45 mm)
2-11/16" (68 mm)
1-1/2"
(38 mm)
21"
(533 mm)
55"
(1397 mm)
12-1/2"
(318 mm)
12-1/2"
(318 mm)
16"
(406 mm)
9"
(229 mm)
16"
(406 mm)
9"
(229 mm)
5-1/16"
(128 mm)
2-3/8"
(60 mm)
4-1/2"
(115 mm)
4-1/2"
(115 mm)
15/16"
(24 mm)
1-1/16"
(26 mm)
11/16"
(18 mm)
4-1/8"
(104 mm)
4-9/16"
(116 mm)
12-1/4"
(311 mm)
15-9/16"
(396 mm)
2-15/16"
(75 mm)
1-3/4" (45 mm)
2-11/16" (68 mm)
1-1/2"
(38 mm)
21 Model #D21040021 Series"
36 Model #D21045036 Series"
55 Model #D21060055 Series"
- 3 -
ILAVATORY INSTALLATION (SLAB MOUNTED):
1. Place template on top of slab and against back of wall surface. Figure A.
Note: Carefully position the template so the center line of the lavatory drain
outlet is directly in line with the center line of P trap in the wall.
2. Trace a line following the bowl cutout area of the template.
3. Drill a hole approximately 5/8" in diameter on the inner side of the oval,
then use a Saber saw to cut along the line.
4. Carefully remove all the slab material required to place the bowl
section of the lavatory into the slab. Figure B.
5. Place lavatory into cut out hole of slab insuring it sits on only the
at surface areas of the lavatory and not any of the contoured bowl
sections. Also insure lavatory can t snug up against the surface of
the wall. Figure C.
6. Remove the lavatory and place a bead of adhesive on the underside
of all four sides of the lavatory and a few dabs of adhesive on the
back side of the lavatory that will contact the wall. Figure D.
7. Carefully place the lavatory into the opening of the slab insuring
the back side securely contacts the wall and press down rmly.
NOTE: Clean off any excess adhesive that comes out immediately
after lavatory is properly in place.
8. Follow up with a small bead of silicon caulking around all outer edges of the
lavatory to prevent water from weeping under the lavatory. Figure E.
9. Connect the P-Trap drain and water connections to shut off valves.
Turn water supply ON. Figure F.
NOTE: If water faucet is an “In Wall” installation or installed
within the wall above the lavatory, connection of P-Trap
drain is only required.
7302323-100 (5/17)
UNDERSIDE BOTTOM OF SINK
Figure A.
Figure B.
Figure C.
Figure D.
Figure E.
Figure F.


Product specificaties

Merk: Dxv
Categorie: Wastafel
Model: Modulus D21050036LH

Heb je hulp nodig?

Als je hulp nodig hebt met Dxv Modulus D21050036LH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden