Draper FocalPoint Handleiding

Draper Projectiescherm FocalPoint

Lees hieronder de 📖 handleiding in het Nederlandse voor Draper FocalPoint (29 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/29

FocalPoint™ Instructions and Assembly Guides

Clicking on size or page number below will take you to that particular assembly guide.

Page

FocalPoint Assembly Instructions ............................................................................................................................... 2

FocalPoint Assembly Guides ..................................................................................................................................3- 26

4:3 NTSC Format

Image Area Image Area Overall Size Overall Size

(Inches) (cm) (Inches) (cm) Diagonal

60" X 80" 152 X 203 68" X 92" 173 x 234 100" 3

72" x 96" 183 x 244 80" x 104" 203 x 264 150" 4

90" x 120" 229 x 305 98" x 128" 249 x 325 150" 5

108" x 144" 274 x 366 116" x 152" 295 x 386 180" 6

126" x 168" 320 x 427 134" x 176" 340 x 447 210" 7

144" x 192" 366 x 488 152" x 200" 386 x 508 240" 8

162" x 216" 411 x 549 170" x 224" 432 x 569 270" 9

180" x 240" 457 x 610 188" x 248" 478 x 630 300" 10

16:9 HDTV Format

45" x 80" 114 x 203 56" x 92" 142 x 234 92" 11

54" x 96" 137 x 244 62" x 104" 157 x 264 110" 12

67½" x 120" 171 x 305 80" x 128" 203 x 325 138" 13

81" x 144" 206 x 366 92" x 152" 234 x 386 165" 14

94½" x 168" 240 x 427 104" x 176" 264 x 447 193" 15

108" x 192" 274 x 488 116" x 200" 295 x 508 220" 16

121½" x 216" 309 x 549 134" x 224" 340 x 569 248" 17

135" x 240" 343 x 610 146" x 248" 371 x 630 275" 18

16:10 Format

50" x 80" 127 x 203 62" x 92" 157 x 234 94" 19

60" x 96" 152 x 244 68" x 104" 173 x 264 113" 20

75" x 120" 191 x 305 86" x 128 218 x 325 142" 21

90" x 144" 229 x 366 98" x 152" 249 x 386 170" 22

105" x 168" 267 x 427 116" x 178" 295 x 447 198" 23

120" x 192" 305 x 488 128" x 200" 325 x 508 226" 24

135" x 216" 343 x 549 146" x 224" 371 x 569 255" 25

150" x 240" 381 x 610 158" x 248" 401 x 630 283" 26

FocalPoint Leg Assembly Guides ......................................................................................................................... 27 29-

Assembly Instructions

FocalPoint™ Projection Screen by Draper

Frame/Screen Assembly

① Remove tarp from case and place on the ground.

② Remove frame pieces from case and place in the appropriate locations

on the tarp.

Please Note: For screens with Viewing areas of 18’ or larger Draper

ships a special corner labeled “Large Screen corner”. If you did not

order a complete screen do not use the standard “corner” for the large

screens. Contact Draper if needed.

Please Note: Each piece is color-coded: refer to FocalPoint™ Assembly

Map included with screen for correct layout (see reverse side).

Please Note: Frame pieces should be placed with "forks" running

counter-clockwise and DuraLoop Attachment Lugs facing out.

③ Assemble frame by inserting "forks" of each piece into extrusions on the

adjoining piece (see Fig. 1). Tighten by turning color-coded attachment

knobs (see Fig. 2).

④ Remove leg pieces from case and place in the appropriate locations on

the tarp.

⑤ Assemble leg according to color-coded assembly map by inserting "forks"

of front extension into extrusion on the leg base and tighten color-coded

attachment knobs. Also, attach vertical frame members in the same man-

ner. Do not yet attach the back extension to the leg base (see Fig. 3).

⑥ Place the screen frame on top of the legs (see Fig. 4).

Caution

① Read instructions through completely before proceeding; retain for future

reference.

② Handle viewing surface with care; do not allow it to come in contact with

sharp or dirty objects.

③ These instructions are based on assembly by a minimum of two people.

④ Make sure screen is level.

⑤ Do not write on viewing surface.

⑥ The ideal temperature range for assembling folding screens to prevent

damaging the surface is 68°-78° F (20°-26° C). Assembling below

recommended temperatures may damage surface and void warranty.

⑦ Do not permit screen fabric to contact border material or loops when

folded. Store in pouch provided.

If you encounter any difﬁ culties assembling your FocalPoint™, call your dealer

or Draper, Inc. in Spiceland, In di ana, 765-987-7999, or fax 765-987-7142.

Figure 1

⑦ Attach legs to frame (see Fig. 4) using provided Leg Cranks as follows:

Package A–3 cranks per leg; Package B–4 cranks per leg; and Package

C–5 cranks per leg. Leg Cranks should be placed as follows: 1 at the low-

est attachment point, 1 at the highest attachment point, and the rest evenly

spaced between the two.

⑧ Attach viewing surface to frame (see Fig. 5).

⑨ Raise FocalPoint into place (this step requires at least two people, depend-

ing on screen size) (see Fig. 6).

⑩ Attach the back extensions to the leg bases (see Fig. 7).

⑪ If provided, attach Anti-Sway Stabilizers to the frame and legs. First,

unhook the viewing surface from the bottom of the frame near the attach-

ment points. Attach ends with threaded hole through the square extrusion

to the ﬁ fth visible hole in from each end of the screen. Attach end with

metal extension to the closest leg extrusion hole (see Fig. 8).

Please Note: You may need to use the built-in adjustment knob to short-

en or lengthen the Anti-Sway Stabilizer so it will reach holes (see Fig. 9).

⑫ If provided, attach HD Leg Braces to frame and legs. Attach ends with

threaded hole through the square extrusion to the frame. Attach end with

metal extension to the back foot extrusion (see Fig. 10).

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Caution:

Beware of

pinch points.

Figure 2

Figure 8

Figure 10

Figure 9

Adjustment

Knob

Patent

Pending

2' (61cm)

4' (122 cm) 2' (61cm)

4' (122 cm)

FocalPoint™ Projection Screen by Draper—Assembly Map

60" x 80" (152 x 203 cm) Image Area—4:3 Format

Before you start:

• Spread the tarp (included).

• Assemble the frame and legs before attaching the screen

surface.

• Frame sections should be arranged so that:

➽ Viewing surface attachment posts are on the outside

of the frame

➽ Guide pins should point counterclockwise

➽ Bolt heads should face upward

All Pins

should point

counterclockwise.

Bolt heads should

face up.

2' (61cm)

Caution:

Beware of

pinch points.

For use with these part numbers

Black-Backed M1300 CineFlex

Silver Anodized Black Silver Anodized Black

385030 385086 385038 385094

Product specificaties

Merk:	Draper
Categorie:	Projectiescherm
Model:	FocalPoint
Kleur van het product:	Black,White
Gewicht:	81000 g
Oorspronkelijke beeldverhouding:	4:3
Montagewijze:	Vloer
Materiaal:	Aluminium,Nylon
Op afstand bedienbaar:	Nee
Afstandsbediening inbegrepen:	Nee
Zichtbare schermhoogte (h):	3200 mm
Zichtbare schermbreedte (b):	4270 mm
Diagonaal:	210 "
Totale grootte van het scherm (hoogte x breedte):	340 x 447 cm
Formaat:	Video
Grenzen:	100 mm