Dometic WeatherPro Control Kit Handleiding

Dometic Niet gecategoriseerd WeatherPro Control Kit

Lees hieronder de 📖 handleiding in het Nederlandse voor Dometic WeatherPro Control Kit (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
SERVICE CENTER &
DEALER LOCATIONS
Please Visit
www.eDometic.com
SERVICE INSTRUCTIONS
REVISION A
Form No. 3307996.029 3/17
©2017 Dometic Corporation
Lagrange, IN 46761
3307906.010
3307906.036
WeatherPro Key FOB Kit
Programming Instructions
MODEL
3307906.010
3307906.036
2
3307906.010 WeatherPro Key FOB Kit contains:
1-3307906.028 Key FOB
1-3307996.029 Key FOB Programming Instructions
3307906.036 WeatherPro Key FOB Kit contains:
1-3309706.044 Key FOB
1-3307996.029 Key FOB Programming instructions
SAFETY INSTRUCTIONS
This manual has safety information and instruc-
tions to help users eliminate or reduce the risk
of accidents and injuries.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe op-
erating instructions.
UNDERSTAND SIGNAL WORDS
A signal word , WARNING CAUTION OR is used
with the safety-alert symbol. They give the level
of risk for potential injury.
Indicates a potentially hazard-
ous situation which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazard-
ous situation which, if not avoided, may result in
minor or moderate injury.
When used without the safety
alert symbol indicates, a potentially hazardous
situation which, if not avoided, may result in
property damage.
Read and follow all safety information and in-
structions.
GENERAL INSTRUCTIONS
Important: These instructions cover several different
Electronic Controls. Identify which one you have and
follow the corresponding instructions. The Electronic
Control is usually located in a storage compartment.
3307906.010 Key FOB Kit is for the following Electronic
Control Kits.
3307843.007 Electronic Control Kit
3307844.005 Electronic Control Kit
3308014.004 Electronic Control Kit
Important: It is recommended that program-
ming procedure for Kit 3307906.010 be done by a
Service Center or a qualiîš¿ed service technician.
The electronic board is susceptible to static
charge. Do not insert metal object inside
control box. Damage to electronic board will
occur if a short is created. Use only a non-
conductive material to depress programming
button inside Electronic Control.
3307906.036 Key FOB Kit is for the following Electronic
Control Kits:
3309424.004 Electronic Control Kit (OEM)
3309424.012 Electronic Control Kit (Aftermarket)
3309424.038 Electronic Control Kit (OEM 10 Pack)
3310287.002 Electronic Control Kit (OEM)
3310287.010 Electronic Control Kit (Aftermarket)
3310287.028 Electronic Control Kit (1 Pack - No Wind
Sensor)
3310287.036 Electronic Control Kit (10 Pack - No Wind
Sensor)
3307906.010 & 3307906.036 Key FOB Kit Programming Instructions
Each replacement Key FOB must be programmed to match
the Electronic Control being operated. These instructions
will take you through the steps necessary to program the
Electronic Control.
3
1. Remove four (4) screws from Electronic Control cover
and lift cover to expose circuit board.
2. Press and release Programming Button . Program-
ming Indicator Light will illuminate.
3. Press and hold Key FOB Patio Awning Extend Button
for four (4) seconds.
Patio Awning
Extend Button
Programming
Button
Programming
Indicator Light
Programming
Indicator Light
Programming
Button
3307843.007, 3307844.005 & 3308014.004 Electronic Control Kit Programming Instructions
3307906.010 & 3307906.036 Key FOB Kit Programming Instructions
3309424.004, 3309424.012, 3309424.038, 3310287.002, 3310287.010, 3310287.028 (1 Pack), and
3310287.036 (10 Pack) Electronic Control Kit Programming Instructions
Programming
Button
1. Insert a non conductive material through the hole in
cover and press and release Programming Button.
2. Press and hold Key FOB Patio Awning Extend Button
for four (4) seconds.
3. Release Key FOB Patio Awning Extend Button. This
completes the programming process.
4. Check awning operation.
4. Release Key FOB Patio Awning Extend Button. This
completes the programming process.
5. Place cover on Electronic Control and secure with
four (4) screws .
6. Check awning operation.
Patio
Awning
Extend
Button
Key FOB
Electronic Control


Product specificaties

Merk: Dometic
Categorie: Niet gecategoriseerd
Model: WeatherPro Control Kit

Heb je hulp nodig?

Als je hulp nodig hebt met Dometic WeatherPro Control Kit stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Dometic

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd