Dometic FT7000P Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dometic FT7000P (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
REVISION 2 Form No. IS-FT7000 02/22 | ©2022 Dometic Corporation
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
STEERING SYSTEMS
MECHANICAL CONTROLS
FT7000P
EN Pro-Pedal Foot Throttle
Installation Manual . . . . . . . . . . . . . . . . . . . . .2
INSTALLER: THESE INSTRUCTIONS CONTAIN IMPORTANT SAFETY INFORMATION
AND BE FORWARDED TO MARINE CRAFT OWNER.MUST
2EN
Contents Pro-Pedal Foot Throttle
Contents 2 ..................................
1 Explanation of Symbols and Safety
Instructions 2 ............................
1.1 Recognize Safety Information . . . . . . . . . . . . . 2
1.2 Understand Signal Words . . . . . . . . . . . . . . . . 2
1.3 Supplemental Directives . . . . . . . . . . . . . . . . . 2
1.4 General Safety Messages . . . . . . . . . . . . . . . .3
2 Intended Use 3 ...........................
3 General Information 3 . . . . . . . . . . . . . . . . . . . . .
3.1 Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2 Component Dimensions . . . . . . . . . . . . . . . . .4
3.3 Tools and Materials . . . . . . . . . . . . . . . . . . . . .5
4 Preinstallation . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1 Planning the Cable Routing . . . . . . . . . . . . . .6
4.2 Determining the Cable Length . . . . . . . . . . . . 6
4.3 Preparing the Mounting Location . . . . . . . . . . 7
5 Installation ............................. 7
5.1 Connecting the Cable to the Engine Control 7
5.2 Connecting the Cable to the Engine 10 . . . . . .
5.3 Mounting the Engine Control 11 . . . . . . . . . . .
6 Adjusting the Engine Control . . . . . . . . . . . . .11
6.1 Slide Mount Adjustment 11 . . . . . . . . . . . . . . . .
6.2 Wide Open Throttle End Stop Adjustment . 12
6.3 Torsion Spring Adjustment 12 . . . . . . . . . . . . . .
6.4 Idle Adjustment 13 . . . . . . . . . . . . . . . . . . . . . . .
7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 Disposal .............................. 13
9 Warranty Information 14 . . . . . . . . . . . . . . . . . . .
10 Mounting Template 15 . . . . . . . . . . . . . . . . . . . . .
Service Center & Dealer Locations
Visit: www.dometic.com
Please read these instructions carefully and follow all instructions,
guidelines, and warnings included in this product manual in order to
ensure that you install, use, and maintain the product properly at all
times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read
all instructions, guidelines, and warnings carefully and that you
understand and agree to abide by the terms and conditions as set
forth herein. You agree to use this product only for the intended
purpose and application and in accordance with the instructions,
guidelines, and warnings as set forth in this product manual as well
as in accordance with all applicable laws and regulations. A failure
to read and follow the instructions and warnings set forth herein may
result in an injury to yourself and others, damage to your product,
or damage to other property in the vicinity. This product manual,
including the instructions, guidelines, and warnings, and related
documentation, may be subject to changes and updates. For up-to-
date product information, please visit www.dometic.com.
Contents
1 Explanation of Symbols and
Safety Instructions
This manual has safety information and instructions to
help you eliminate or reduce the risk of accidents and
injuries.
1.1 Recognize Safety Information
This is the safety alert symbol. It is used to alert
you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Understand Signal Words
A signal word will identify safety messages and property
damage messages, and also will indicate the degree or
level of hazard seriousness.
WARNING
Indicates a hazardous situation that, if avoided, not
could result in death or serious injury.
NOTICE: Used to address practices related to not
physical injury.
IIndicates additional information that is not related
to physical injury.
3
EN
Pro-Pedal Foot Throttle Intended Use
1.3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before proceeding to
install this product:
Read and follow all safety information and
instructions.
Read and understand these instructions before
installing this product.
The installation must comply with all applicable local
or national codes, including the latest edition of the
following standards:
U.S.A.
American Boat and Yacht Council (ABYC)
1.4 General Safety Messages
WARNING: LOSS OF CONTROL HAZARD.
Failure to obey the following could result in
death or serious injury:
Use only Dometic replacement parts and
components that are specifically approved for use
with the product.
Avoid improper installation, adjustment, alterations,
service, or maintenance of the product.
Do modify this product in any way. Modification not
can be extremely hazardous.
2 Intended Use
The Pro-Pedal Throttle, hereinaer referred to as engine
control, provides mechanical throttle operation for
inboard, outboard, inboard/outboard, and sterndrive
engines. The installer-provided control cables,
hereinaer referred to as cables, connect the engine
control to the boat engine. Inboard/outboard and
sterndrive engines are hereinaer referred to as I/O
engines. This engine control is only suitable for the
intended purpose and application in accordance with
these instructions.
This manual provides information that is necessary for the
proper installation of the engine control. Poor installation
and/or improper operating or maintenance will result in
unsatisfactory performance and a possible failure. The
manufacturer accepts no liability for any injury or damage
to the product resulting from:
Incorrect assembly or connection
Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
Alterations to the product without express permission
from the manufacturer
Use for purposes other than those described in this
manual
Dometic reserves the right to change product
appearance and product specifications.
3 General Information
This section provides general information about the
engine control and its components.
Dometic recommends the installation and use of an
emergency ignition interrupt. This switch should be
connected by a cord to the boat driver. Should the
driver be thrown from the helm position, the engine will
automatically shut off. This switch can be obtained from
most marine dealers and distributors.
IThe images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
3.1 Compatibility
This engine control is compatible with engines from the
following manufacturers.
Engine Manufacturers
BRP/OMC Suzuki
Evinrude/Johnson Tohatsu
Honda US Marine
Mercury/MerCruiser Volvo
Nissan Yamaha


Product specificaties

Merk: Dometic
Categorie: Niet gecategoriseerd
Model: FT7000P

Heb je hulp nodig?

Als je hulp nodig hebt met Dometic FT7000P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Dometic

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd