Digitus DN-82000 Handleiding

Digitus Niet gecategoriseerd DN-82000

Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus DN-82000 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 213 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

14 SLOTS UNMANAGED

MEDIA CONVERTER CHASSIS

PRODUCT OVERVIEW

The 14 slots media converter chassis supports plug-and–play installation of stand-alone

media converters convert modules.

14 slots rack-mounted chassis

This converter chassis can supply several media converters with power, this will simple

the links and structure, it can work stably and adapt broad width of voltage. It can store

strong power and can be operated and managed easily. The maintenance of this chassis

is also very easy. This option is the very one to meet the requirements of good stability,

high capacity, good integration and good quality.

This option supports hot-swap convert modules. It can work with single power supply or

dual power supply as users wish, when the power supply should be maintained or

changed, it is not necessary to pull-out the converters, this makes the maintenance easy.

With all these advantages, this option can supply users with an effective solution of

networks.

INSTALLATION

1. When you unpack this product package, please check the devices with packing list.

2. Install the converter chassis in a standard 483mm (19”) cabinet and fix it.

3. Unscrew two screws from the side next to the RJ45 port of the media converter. Then

use these two screws to fix the carrier given with this option onto the side of media

converter, leaving the bigger side of the screws ahead. Then insert the converter to the

chassis, make sure the power plug of chassis is inserted in the power port of media

converter. When the converter is fully and firmly fit the chassis, fasten the screws on

the carrier. Follow the above steps, install all necessary converters in the chassis, then

block up any slots not for use temporarily.

4. Insert the RJ45 twisted pair to the electrical port of converter, and insert the fiber to the

fiber port of the converter. Then connect the supplied AC to DC power adapter to the

receptacle at the back of the chassis, attach the plug into a standard AC outlet with a

voltage range from 100 to 260 Vac or a DC outlet with a voltage of 48 Vac. Then turn

the power switch on, the POWER LED Lamps in the chassis will on and at green color.

For 14 slots media converter chassis, the POWER LED Lamp is in front side. Then the

fans began to work, that shows the power supply of the chassis is normal and stable.

The LED Indicator Lamps of converters installed in chassis should indicate valid

network connections and working status. Then the chassis began to work stably.

5. If the chassis is with dual power supply, please turn on both two power supply, and they

will work together. This will extends the life cycle of the power supply, and can make

sure the chassis work normally in case one of them broken down.

FAULT AND MAINTENANCE

1. Finding out the problems.

When the electrical current WER LED Lamps of chassis becomes dangerous, the PO

will become red with alarm at the same time. When the problems have been cleared,

the LED Lamps will back to normal.

If the fuse has blown, or the power supply has broken down, the POWER LED Lamps

will be off, and the fans will not work. (The fuse is under the plug, you can pull it out for

checking or changing when necessary.)

When the fans of chassis broken down, the POWER LED Lamps will be normal but the

fans will not work. If this happens, the power supply must be changed for new ones,

and we will do this for users, you should not do it by yourself, or you may break up the

option s.

If the power supply of chassis is normal, but the LED Lamps of converters are off, there

might be any problems with the connection between the plug board of chassis and the

power supply, you should stop the electrical current and pull out the power adapter for

checking and reinserting.

2. Changing the power supply for new ones

When one of the dual power supply broke down, the chassis can work normally. You

should pull out the broken one .Then pull out the plug from it, and change it for another

on. connect the plug agai sis and converters will keep n. When this is done, the chas

working.

SPECIFICATIONS

Number of slots: 14

Media converters adapted: 10/100M or 1000M or 10/100/1000M stand-alone

media converters

Power in: AC 100 V~260 V; OR DC 48V

Power out: DC 5V, 12A

Diameter of DC plug: 2.5/5.5 mm

Ripple: ≤50 Mv

Noise: ≤50 Mv

Protection of power supply: circuit-breaker when overvoltage; circuit-breaker when

overflow; circuit-breaker when short circuit

Operating Temperature: 0°C ~50°C

Storage Temperature: -20°C ~85°C

Humidity: 5%~95%

Dimensions: L485, W231, H90 mm; 483mm (19 inches) 2U

Product specificaties

Merk:	Digitus
Categorie:	Niet gecategoriseerd
Model:	DN-82000
Kleur van het product:	Zwart
Breedte:	485 mm
Diepte:	231 mm
Hoogte:	90 mm
Stroomvoorziening:	85-265 VAC, 50/60 Hz, 1.2A
Land van herkomst:	China
Code UK-handelstarief:	85176200
Aantal sloten:	14
Temperatuur bij opslag:	-20 - 85 °C
AC-adapter, uitgangsspanning:	5 V
Maat:	19 "
Afmetingen (B x D x H):	485 x 231 x 90 mm
Rackcapaciteit:	2U
Bedrijfstemperatuur (T-T):	0 - 50 °C