Digitus DN-14001-2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus DN-14001-2 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Quick Installation Guide
DN- -214001
2
1. Introduction
Intelligent, fast and intelligent state tester for connection of telephone and
network harness Check the connection between RJ45 connector and wire-
harness. Accurately determine which end of the RJ45 connector is
Connecting with the network line perfectly solves the problem that the
ordinary tester cannot determine two water. In the end, the RJ45
connector is not connected at that end, so as to save time.
2. Test
Pull the power switch up to ( ) position, QC
and the yellow power lamp of the host (QC)
is always on. The machine is in working
condition.
Insert one end of the RJ45 connector (or
RJ11 connector) into (QC) which needs to
be inspected check port.
The connector is connected with the wire
harness in good condition, and the wire
harness indicator lights are all on.
3
lf the connector is not connected properly
to the wire harness, the indicator light of -
the wire harness will not be turned on.
Function
For network 1.2.3.4.5.6.7.8.G line pairs, telephone line 1.2.3.4.5.6 line
pairs, root- -by root (pair) test, which (pair) staggered line, short circuit and
open circuit can be distinguished and determined.
Turn down the power switch to (TEST)
position, (TEST) power indicator green light
flashes.


Product specificaties

Merk: Digitus
Categorie: Niet gecategoriseerd
Model: DN-14001-2

Heb je hulp nodig?

Als je hulp nodig hebt met Digitus DN-14001-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Digitus

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd