Digimerge Echelon DCV13TL Handleiding

Digimerge Bewakingscamera Echelon DCV13TL

Lees hieronder de đź“– handleiding in het Nederlandse voor Digimerge Echelon DCV13TL (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Digimerge Technologies Inc.
Copyright © 2010 Digimerge Technologies Inc.
As our products are subject to continuous improve-
ment, Digimerge reserves the right to modify product
design, specifications and prices, without notice and
without incurring any obligation. E&OE
Quick Start Guide
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.digimerge.com
Camera Specifications
HIGH RESOLUTION
COLOR IR DOME CAMERA
Specfications:
Image Sensor
Video Output
Horizontal Resolution
FOV (diagonal)
Termination
Lens / Lens Mount
S/N Ratio
Sync. & Scan. Systems
IR Range
Power Consumption
70 Degrees
Video: BNC Female
3.6 mm F2.0/Fixed
> 48dB
Internal; 2:1 Interlace
Up to 40 ft (12 m); 12 LEDs
220 mA max
Operating Temp. -4°F ~ 122°F
(-20°C ~ 50°C)
Comp. 1.0 Vpp @ 75ohm
Iris & Shutter Speed AES; 1/60 ~ 1/50,000 sec.
Power Requirement 12V DC ±10%
Dimensions DIA: 3.7” (94 mm)
Minimum Illumination
Video Format / Pixels
0.5 LUX @ F1.2 (IR Off)
0 LUX (IR LEDs ON)
Weight 0.85 lbs / 386 g
1/4” Echelon Series Sensor
NTSC: 656 (H) x 492 (V)
480 TVL
Dimensions:
3.7in/94mm
3.1in/
75mm
Model: DCV13TL
English Version 1.0
4. Connect power to the camera:
•DC Power—Power adaptor: Connect the
included 12V DC Power Adaptor to the camera.
Plug the Power Adaptor into an outlet.
•DC Power—Power Pigtail: Connect the included
Power Pigtail to the camera. Connect the
terminating wires of the cable directly to the DC
power source.
• Red wire on Pig tail is positive (+).
• Black wire on Pig tail is negative ( - )
Contents Installing the camera
1 x Power Pigtail
1 x High Resolution
Color Camera
1. Mount the Camera Base to the ceiling or wall using
the provided screws.
NOTE: You may need to disassemble the camera using the provided
Allen key. Loosen the tighening screws located on the outer ring of the
Dome Cover.
2. Position the Ball Camera to the desired position
and angle.
3. Position the Dome Cover over the Ball Camera.
Holding the cover firmly in place, use the Allen key
to tighten the screws on the outer ring of the Dome
Cover.
Features:
• 1/4” Echelon Series Image Sensor provides a
High Resolution image (480 TV Lines)
• Auto Mechanical IR Cut Filter removal function
ensures accurate color reproduction
• Durable Weatherproof Indoor/Outdoor camera
(IP66)*
• 3-axis design allows for wall or ceiling mounting
• Enhanced Night Vision Capability — up to 40 ft /
12 m **
• 12V DC Operation
* Not intended for submersion in water. Installation in a sheltered
location recommended.
** IR Illumination range of 40 ft. (12 m) under ideal conditions.
Objects at or beyond this range may be partially or completely
obscured, depending on the camera application.
WARNING - A REGULATED UL/CSA APPROVED 12V DC 500mA
power supply is REQUIRED for use with this camera. Use of a non-reg-
ulated, non-conforming power supply can damage this product and will
void the warranty.
4 x Mounting screws
1 x Allen key
Connecting the camera
Setup Diagram:
ATTENTION - This Camera includes a Mechanical Auto IR Cut Filter.
When the camera changes between Day/Night Lighting, an audible
clicking noise may be heard coming from the camera. This clicking is
normal, and indicates that the Camera filter is working.
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the cameras and
cables to the TV,VCR, DVR or Observation System.
PRECAUTIONS
• Use an appropriate low voltage power cable to prevent fire or
electrical shock.
• Make sure to install the camera in an area that can support the
camera weight.
• There are no user serviceable parts inside the camera. Please
do not disassemble the camera.
• Do not clean the lens cover with an abbrasive cleaning material
- please use a soft cloth to clean the lens cover.

Product specificaties

Merk: Digimerge
Categorie: Bewakingscamera
Model: Echelon DCV13TL

Heb je hulp nodig?

Als je hulp nodig hebt met Digimerge Echelon DCV13TL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Digimerge

Digimerge

Digimerge Echelon DCB44DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV24DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV54DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCB54DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV64DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCB64DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV13TL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCB34DL Handleiding

4 September 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Axis

Axis Q1800-LE-3 Handleiding

23 December 2024
Honeywell

Honeywell HC35WE5R3 Handleiding

20 December 2024
Honeywell

Honeywell Performance H4W8PER2V Handleiding

20 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024
TP Link

TP Link VIGI C450 Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024