Digimerge Echelon DCB64DL Handleiding

Digimerge Bewakingscamera Echelon DCB64DL

Lees hieronder de 📖 handleiding in het Nederlandse voor Digimerge Echelon DCB64DL (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
WARNING - A REGULATED UL / CSA APPROVED 12V DC / 24V AC
power supply is REQUIRED for use with this camera. Use of a non-
regulated, non-conforming power supply can damage this product and
voids the warranty.
Product Information
User Manuals Quick Start Guides
Specification Sheets
Video Tutorials & DemosLatest News
Contents
700+ TVL
VARIFOCAL IR BULLET CAMERA
MODEL: DCB64DL
QUICK START GUIDE
English Version 1.0
www.digimerge.com
IT’S ALL ON THE WEB!
www.digimerge.com
VISIT
Digimerge Technologies Inc.
Copyright © 2013
As our products are subject to continuous improvement, Digimerge
reserves the right to modify product design, specifications and prices,
without notice and without incurring any obligation. E&OE
1 x Weatherproof IR Bullet
Camera with Varifocal Lens
3 x Mounting Screws
1 x Allen Key
1 x Mounting Template
Features
Safety Precautions
• Use an appropriate low voltage power cable to prevent fire or electrical shock.
• Make sure to install the camera in an area that can support the camera weight.
• There are no user serviceable parts inside the camera. Please do not
disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning material. Please use a
soft cloth to clean the lens cover.
• 1/3” Sony EX-View™ II 960H with Effio DSP / 700+TVL
• Superior Low Light Sensitivity
• Advanced Digital Noise Reduction
• 110ft (34m) Smart IR Night Vision Range*
• 2.8–12mm Varifocal Auto Iris Lens
• Secure Zoom / Focus Adjustment
• IP66 Weatherproof Rating**
• Cable Through Bracket Design
• Wall / Ceiling Mountable
• 12V DC / 24V AC Operation
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on the
camera application
** Not recommended for submersion in water
Ultra Resolution,
Outstanding Value Cameras
Ultra Resolution Cameras
with Advanced Features
Fully Connected DVR’s
Focus
Zoom
Stand screw
Adjustment ring
Installing the Camera
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR.
Image Sensor 1/3” Sony EX-View™ II 960H
Video Format NTSC
Effective Pixels H: 976 V: 494
Horizontal Resolution 700+ TVL
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio >52dB (AGC Off)
Iris Auto Iris
AES Shutter Speed 1/60 ~ 1/100,000 sec.
Min. Illumination 0.03 LUX @ F1.2 (IR Off)
0 LUX (IR LEDs ON)
Video Output Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type 2.8–12mm F1.6 / Varifocal
FOV (Diagonal) 33–104°
Termination Video: BNC Female
IR Range / Qty. 110ft / 34m; 8 Super Flux & 2 High
Power LED’s
Power Requirement 12V DC ± 10% / 24V AC ± 10%
Power Consumption 12V: 600mA max / 24V: 300 mA max
Operating Temp. Range –10° ~ 50°C
Environmental Rating IP66
Dimensions (LxWxH) 10.2” x 2.8” x 2.7”
259mm x 71mm x 69mm
Dimensions
Camera SpecificationsSetting up the Camera
1. Connect the BNC connector of the camera to
the video cable.
2. Connect power source to the power terminal
block.
NOTE: Make sure to follow correct polarity as marked
on the power connector. For AC power, connect multiple
cameras using consistent wiring polarity to prevent
video rolling.
3. “Use the allen key to remove the cover plate on
the bottom of the camera housing.
1. Use the included mounting template to
mark mounting points.
NOTE: If mounting the camera on a wall, ensure
that the label on the camera base faces up.TOP
259mm / 10.2” 71mm / 2.8”
69mm
2.7”
2. Mount the camera to the wall using the
included screws.
4. Use a flat-blade screwdriver to slightly loosen
the knobs. Adjust the and ZOOM FOCUS
knobs as required.
Video connector
Removable power
terminal block
(pre-attached)
Power connector
5. When adjustments are finished, tighten the
knobs to lock in place. Reattach the cover
plate and tighten cover plate screws.
3. Connect the video and power cables as
described in the next section, ‘Setting up
the Camera’.
4. Loosen the stand screw using the allen
key. Loosen the adjustment ring by hand.
5. Move the camera to the desired position.
6. Tighten the stand screw and the adjustment
ring to secure the camera in place.

Product specificaties

Merk: Digimerge
Categorie: Bewakingscamera
Model: Echelon DCB64DL

Heb je hulp nodig?

Als je hulp nodig hebt met Digimerge Echelon DCB64DL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Digimerge

Digimerge

Digimerge Echelon DCB44DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV24DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV54DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCB54DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV64DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCB64DL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCV13TL Handleiding

4 September 2023
Digimerge

Digimerge Echelon DCB34DL Handleiding

4 September 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Axis

Axis Q1800-LE-3 Handleiding

23 December 2024
Honeywell

Honeywell HC35WE5R3 Handleiding

20 December 2024
Honeywell

Honeywell Performance H4W8PER2V Handleiding

20 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024
TP Link

TP Link VIGI C450 Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024