Danfoss ECtemp Touch Handleiding

Danfoss Thermostaat ECtemp Touch

Lees hieronder de 📖 handleiding in het Nederlandse voor Danfoss ECtemp Touch (24 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 189 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

Danfoss ECtemp Touch

Electronic Intelligent Timer

Thermostat

Installation Guide

electricheating.danfoss.com

Danfoss ECtemp Touch

Installation Guide2

1 Introduction

The Danfoss ECtemp Touch is an electronic programmable

timer thermostat used for controlling electrical oor heat-

ing elements. The thermostat is designed for xed instal-

lation only and can be used for both direct heating of the

entire room and for comfort heating of the oor. Among

others, the thermostat has the following features:

• A touchscreen display with backlight.

• An easy-to-follow menu-driven programming and

operation.

1 Introduction � � � � � � � � � � � � � � � � � � � � � 2

1.1 Technical Specications . . . . . . . . . . . 3

1.2 Safety Instructions . . . . . . . . . . . . . . . 5

2 Mounting Instructions � � � � � � � � � � � � � � � 6

3 Settings � � � � � � � � � � � � � � � � � � � � � � � � 9

3.1 Initial Settings. . . . . . . . . . . . . . . . . . 9

3.2 Forecast . . . . . . . . . . . . . . . . . . . . 13

3.3 Window Open . . . . . . . . . . . . . . . . 15

3.4 Maximum Floor Temperature . . . . . . . 16

4 Symbols � � � � � � � � � � � � � � � � � � � � � � � 18

5 Warranty� � � � � � � � � � � � � � � � � � � � � � � 19

6 Disposal Instruction � � � � � � � � � � � � � � � 19

Table of Contents

Danfoss ECtemp Touch

3Installation Guide

• An installation wizard with room/oor type-specic

setup.

• Support for multiple frame systems.

• Compatible with several 3rd party NTC sensors.

• Thermostat settings can be specied before instal-

lation and imported to the thermostat using a

web-generated code, or copied from a thermostat in a

similar installation.

• Smart access to thermostat settings after installa-

tion by using a web code interface for easy setup or

remote troubleshooting.

More information on this product can also be found at:

electricheating�danfoss�com

1�1 Technical Specications

Operation voltage 220-240 V~, 50/60 Hz

Standby power consumption Max. 0.40 W

Relay:

Resistive load

Inductive load

Max. 16 A / 3680 W @ 230 V

cos φ= 0.3 Max. 1 A

Sensing units NTC 6.8 kΩ at 25°C

NTC 10 kΩ at 25°C

NTC 12 kΩ at 25°C

NTC 15 kΩ at 25°C (Default)

NTC 33 kΩ at 25°C

NTC 47 kΩ at 25°C

Product specificaties

Merk:	Danfoss
Categorie:	Thermostaat
Model:	ECtemp Touch
Soort bediening:	Touch
Kleur van het product:	Wit
Gewicht:	24 g
Diepte:	24 mm
Hoogte:	85 mm
Gewicht verpakking:	24 g
Breedte verpakking:	95 mm
Diepte verpakking:	140 mm
Hoogte verpakking:	85 mm
Stroombron:	AC
Internationale veiligheidscode (IP):	IP21
Beeldscherm:	LED
Spanning:	220 - 240 V
Afstandsbediening inbegrepen:	Ja
Temperatuursensor:	Ja
Slimme thermostaat:	Ja
Regelbereik temperatuur:	5 - 45 °C