Ctek Bumper 120 Handleiding

Ctek Batterij-oplader Bumper 120

Lees hieronder de 📖 handleiding in het Nederlandse voor Ctek Bumper 120 (2 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

WWW.CTEK.COM

CTEK BUMPER

CTEK BUMPER helps protect your CTEK charger from bumps and

scratches. Adds extra grip on slippery surfaces. Made of durable

silicon rubber material. The CTEK BUMPER ﬁts snugly around the

body of your CTEK charger.

BUMPER 10

Suitable for all CTEK chargers 0.8A 40-057

BUMPER 60

Suitable for all CTEK chargers 3.8–5.0. 56-915

BUMPER 100

Suitable for all CTEK chargers 7.0A 40-058

BUMPER 120

Suitable for all CTEK chargers 10A 40-059

CTEK MOUNTING BRACKET

Robust and versatile mounting bracket for practical charger and

cable storage. Open frame design allows easy access to charger

functions.

• Practical storage of charger and cables

• Open frame design allows easy access to charger functions.

• Suitable for all CTEK chargers 3.8–5.0A

Part no. 40-132

FOR OUR VALUED

CUSTOMERS:

SMARTLY DESIGNED ACCESSORIES THAT PROMOTE

USEABILITY, SAFETY, SIMPLICITY AND ADDITIONAL

FUNCTIONALITY

INDICATOR

INDICATOR is the easiest way to monitor the charge in your

battery. An accurate reading for your battery is displayed two

hours after you’ve used your vehicle.

RED means the battery charge is below 12.4 V. It’s deﬁnitely

time to charge the battery.

YELLOW means the battery charge is between 12.4 and 12.65 V.

It’s time to start thinking about charging the battery.

GREEN means the battery charge is more than 12.65 V.

OK! No need for charging.

CONNECT

Our products are designed and developed to be as simple

as possible to use. All CTEK chargers are supplied with

our custom quick connector.

ACCESSORIES

CONNECT

– Eyelet

Connect - Eyelet is a handy

accessory that enables you to

charge batteries that are in

hard to reach places or where

using clamps is inconvenient or

impossible. Connect – Eyelet is

easy to ﬁt, splash proof and

dust proof. 400mm cable 

length. Compatible with all

CTEK chargers up to 10 A.

Eyelet M6 56-260

Eyelet M8 56-261

Eyelet M10 56-329

CONNECT

– Cig Plug

Connect – Cig Plug is an easy

to fit adapter that allows

charging from a CTEK

compatible charger through

the 12 V cigarette lighter or 

accessory socket. 400 mm 

cable length. Compatible with

all CTEK chargers up to 7 A. 

Connect – Cig Plug is a

universal model that ﬁts both

12mm and 21mm sockets.

Part no. 56-263

Note: Socket must be powered

even when ignition is in ”o”

position.

CONNECT

– Cig Socket

Connect – Cig Socket is a useful

accessory that increases the

usage of the CTEK Connect

battery connector. When the

Connect - Cig Socket has been

connected, it allows you to use

GPS, mobile phones, handlebar

heaters and heated clothing etc.

1 m cable length.

Part no. 56-573

CONNECT

– 2.5M Extension Cable

Useful extension cable which

allows any CTEK charger up to

10A to be connected to other 

accessories such as clamps or

quick connectors (Comfort

Connect). Handy when charger

has to be placed some distance

from the battery.

2.5 m cable length.

Part no. 56-304

INDICATOR

– Eyelet

Indicator – Eyelet M6 and M8

use a simple ‘trac light’

system to show the state of

charge of your battery. With

Indicator – Eyelet you have a

permanent installation. Should

charging be required plug in the

CTEK charger and charge the

battery.

Cable length 500mm.

Current drain: 1,5mA

Current drain/month: 1,1Ah

Eyelet M6 56-629

Eyelet M8 56-382

INDICATOR

– Cig Plug

Indicator – Cig Plug is a

combined quick connector and

indicator for easy charging.

Perfect for checking status and

charging the battery through

the vehicle 12V socket.

400mm cable length. Suitable

for all 12V CTEK chargers up to

7A. Indicator – Cig Plug is a

universal model that ﬁts both

12mm and 21mm sockets.

Current drain: 1,5mA

Current drain/month: 1,1Ah

Part no. 56-870

Note: Socket must be powered

even when ignition is in ”o”

position.

INDICATOR

– Clamp

Indicator – Clamp uses a simple

‘trac light’ system to show

the state of charge of your

battery. Easy to move between

vechicles, – ideal for workshops

and showrooms. Should

charging be required the cap

can be removed from the unit

and a compatible CTEK charger

plugged in to restore the

battery to fully charged status.

Cable length 1.5 m.

Current drain: 1,5mA

Current drain/month: 1,1Ah

Part no. 56-384

INDICATOR

– Panel

Indicator – Panel uses a simple

‘trac light’ system to show

the state of charge of your

battery. Available in two cable

lengths, 1.5m and 3.3m. No

cables are included in the

Indicator – Panel with ﬂat pin

connection.

Current drain: 1,5mA

Current drain/month: 1,1Ah

Panel M8 (1.5 m) 56-380

Panel M8 (3.3 m) 56-531

Panel (Flat Pin) 56-562

ACCESSORIES

Product specificaties

Merk:	Ctek
Categorie:	Batterij-oplader
Model:	Bumper 120

Heb je hulp nodig?

Als je hulp nodig hebt met Ctek Bumper 120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Batterij-oplader Ctek

Ctek READY AUTOMOTIVE Handleiding

25 April 2024

Ctek Smartpass 120T Handleiding

12 Juni 2023

Ctek CS ONE Handleiding

4 Juni 2023

Ctek CT5 Handleiding

4 Juni 2023

Ctek MXT 14 Handleiding

15 Mei 2023

Ctek M15 Handleiding

6 Mei 2023

Ctek D250T Handleiding

6 Mei 2023

Ctek Pro Battery Tester Handleiding

4 Mei 2023

Ctek Bumper 120 Handleiding

1 Mei 2023

Ctek XS 7000 Handleiding

27 April 2023

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader

Gp Batteries PowerBank GP BCFKP01 Handleiding

17 November 2024

EGO PGX1602E-H Handleiding

17 November 2024

Nitecore Intellicharger i2 Handleiding

17 November 2024

Shure SBC10-USB Handleiding

17 November 2024

Sungrow SH5.0RT Handleiding

16 November 2024

Ansmann Powerstation Extension PSE2200 Handleiding

16 November 2024

Ansmann Powerstation PS600AC Handleiding

16 November 2024

Ansmann Powerstation Extension PSE600 Handleiding

16 November 2024

Ansmann Powerstation PS2200AC Handleiding

16 November 2024

Ansmann WiLine WCC15 Handleiding

16 November 2024