Conceptronic EMRICK07G Handleiding

Conceptronic Niet gecategoriseerd EMRICK07G

Lees hieronder de 📖 handleiding in het Nederlandse voor Conceptronic EMRICK07G (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Quick Installation Guide

EMR CK 7GI 0

Schnellinstallationsanleitung

Guide d'Installation Rapide

Guía de Instalación Rápida

Guida di Installazione Rapida

Gyors Telepítési Útmutató

Szybka Instrukcja Instalacji

Guia de Instalação Rápida

SPECIFICATIONS

Bus Interface

PCI Express-

Power input interface

15 pin SATA connector-

Port Configuration

2 x USB-C 3.2 Gen 2

System Requirements

◼ 7/8/ 10/11 Windows Vista/ 8.1/ , Linux

◼ Available PCI Express x4 or x16 slot

( Express p2-x1 slot) NOT supported PCI

Operating Temperature

0°C ~ 60°C

Dimensions

80 20 x 58 x mm

Weight

32g

Features

◼ -lane (x2). PCI Express Base Specification Revision 2.0 dual

◼ Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1

◼ Management Specication Revision . Compliant with PCI Bus Power Interface 1.2

◼ . Compliant with USB Attached SCSI protocol Revision 1.1

◼ VDC / 9 . Each USB port supplies maximum +5.0 0. A power output to USB device

◼ - . Built in over current protection on each USB port

◼ -swapping feature allows connecting/disconnecting the Hot device without powering down

the system.

Package Contents

◼ EMRICK07G

◼ Driver CD

◼ L ow profile bracket

◼ Quick Installation Guide

English

Congratulations on the purchase of your Conceptronic EMRICK07G.

When problems occur, we advise you to visit our support site (go to www.conceptronic.net

and click on 'Support'). If you have other questions about your product and cannot find it on

our website, please contact us at support@conceptronic.net.

For more information about Conceptronic products, please visit the Conceptronic website:

www.conceptronic.net.

Installation & usage

◼ Turn Off the power to your computer.

◼ s cover. Unplug the power cord and remove your computer’

◼ Remove the slot bracket from an available PCIe slot.

◼ s bus connector with the selected PCIe slot on To install the card, carefully align the card’

the motherboard. Push the board down firmly.

* SATA power The PCI Express Card must be connected to the SATA power cable to the

jack.

◼ s holding screw to secure the card. Replace the slot bracket’

◼ Replace the computer cover and reconnect the power cord.

Your computer will show the “New Hardware Wizard” on your screen. You can ignore this

“New Hardware Wizard” by clicking “Cancel”.

Windows Vista/7/8/ (32/64 bit): 8.1

◼ -ROM in the optical drive of your computer. The AutoPlay option will be Insert the CD

shown automatically. Click on “Run Autorun.exe” to start the autorun menu.

◼ Select “Install Drivers” and follow the onscreen instructions to install the required drivers

for the serial PCIe card.

◼ When the driver installation is complete, restart your computer to ensure the drivers are

correctly loaded.

Windows (32/64 10/11 bit):

◼ The computer will automatically recognize and install the new hardware. No driver

installation is required.

Safety & Warnings instructions

◼ Keep the device away from water, humidity, fire or hot environments.

◼ Keep your device and all its parts and accessories out of the reach of small children.

◼ Do not leave the packaging material lying around carelessly. This may become

dangerous playing material for children.

◼ Avoid dropping, throwing or crushing the device.

◼ Do not open, change or damage the device.

◼ Disconnect the product from the mains before cleaning.

◼ e-free cloth. Clean the product with a dry, fibr

Disposal of waste electrical equipment: the product at a Dispose of

recycling point. Do not dispose together with household waste. Incorrect of

storage/disposal can harm the environment and/or cause injury.

CE marking:/ UKCA Conceptronic declares that this product

complies with the directives listed in the section 'Declaration of

Conformity'.

Product specificaties

Merk:	Conceptronic
Categorie:	Niet gecategoriseerd
Model:	EMRICK07G
Kleur van het product:	Groen
Gewicht:	32 g
Breedte:	58 mm
Diepte:	80 mm
Hoogte:	20 mm
Gewicht verpakking:	90 g
Breedte verpakking:	125 mm
Diepte verpakking:	175 mm
Hoogte verpakking:	30 mm
Type verpakking:	Doos
Land van herkomst:	China
Bedoeld voor:	PC
Intern:	Ja
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type C:	2
Ondersteunt Linux:	Ja
Snelle installatiehandleiding:	Ja
Hostinterface:	PCIe
Meegeleverde drivers:	Ja
Montagebeugels meegeleverd:	Ja
Chipset:	ASM1142
(Buitenste) hoofdverpakking hoogte:	405 mm
(Buitenste) hoofdverpakking breedte:	340 mm
(Buitenste) hoofdverpakking brutogewicht:	2700 g
(Buitenste) hoofdverpakking lengte:	205 mm
Hoeveelheid per (buitenste) hoofdverpakking:	30 stuk(s)
Code geharmoniseerd systeem (HS):	84733020
Hot-swap:	Ja
Uitbreidingskaartstandaard:	PCI 2.0
Data transfer snelheid (max):	10 Gbit/s
Aantal Internal SATA ports:	1
Output interface:	USB 3.2 Gen 2 (3.1 Gen 2)
UASP-ondersteuning:	Ja
Type SATA-voedingsconnector:	SATA 15-pin