Celestron reTrace Deluxe 44857 Handleiding

Celestron Navigator reTrace Deluxe 44857

Lees hieronder de 📖 handleiding in het Nederlandse voor Celestron reTrace Deluxe 44857 (11 pagina's) in de categorie Navigator. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
INSTRUCTION MANUAL
MODEL 44856 / 44857
ENGLISH
2
1. Scroll Key
2. Change Settings Key
3. Power Key
4. Set Key
5. Satellite Signal Strength Icon
6. Data Log Icon
7. Clock/Time of Day
8. Battery Status Icon
9. Latitude and Longitude Reading
10. Main Screen (Compass Mode Shown)
INSTALL BATTERIES
Unscrew the latch on the back of your reTrace
Deluxe to access
the battery compartment. Insert two “AAA” alkaline or lithium
batteries in the direction marked inside the battery compartment.
Replace cover and screw down securely. Replace the batteries
when the display’s “Battery” icon indicates low power.
2 AAA batteries
(not uncluded)
Turn the unit on by and the key for pressing holding POWER
3 seconds. Powering outdoors with a clear view of the sky will
ensure good quality GPS reception. If this is the first time you are
turning on your reTrace
Deluxe, the Compass window will appear.
Start Up Page
Compass Window
reTrace™ Deluxe Interface
67
1
2
3
4
5
8
9
10
3
I. COMPASS
The Compass window is the default window when reTrace is
activated for therst time. Use it like a normal compass by holding
in the palm of your hand as level (parallel) with the ground as
possible. (This will ensure the most accurate reading.) The arrow
will always point to true North giving you your relative direction.
*NOTE: You may need to calibrate the compass. To do this, move
the compass in a “Figure 8” pattern a few times as shown below.
To see your current Latitude and Longitude reading, and press
hold the SET key. The reading will automatically go away 3
seconds after you release the key.SET
II. WAYPOINTS/POINTS OF INTEREST (POIs)
WAYPOINT PAGE ICONS
1
2
3
4
5
1. 32 Way Arrow – The 32 Way Arrow points in the direction of
your saved Waypoint or POI. If the GPS signal is not fixed, the
display will be empty. If the current window has no POI
assigned, the arrow with be gray.
2. Waypoint Icon- You can choose and store 20 unique Waypoint
Icons to help you keep track of your marked places. NOTE:
Waypoints are also referred to as POIs or Points of Interest.
3. Distance to Waypoint Display – This readout will display the
distance to your selected Waypoint. NOTE: This is the straight
line distance and does not reflect the actual distance you
have traveled. If the GPS signal is not fixed, the display will
look as follows: _ _ _._. The maximum distances are 0 to 1760
yards, 1-9999 miles, 0 to 1000m and 1 to 9999km.
4. Time – The time of day is displayed here.
5. Waypoint Number – The number you assign to your Waypoint
or POI.
The reTrace Deluxe allows you to save 20 unique Points
of Interest (POIs) or Waypoints. In other words, by using your
reTrace Deluxe, you will be able to retrace your steps back
to your favorite locations – anywhere in the world. These could
be camping spots, fishing spots, a secret location, your favorite
restaurant or where you parked your car.
SETTING YOUR WAYPOINTS/POIs
STEP 1. Assign A Number
When you are standing at your POI, the first thing you will do is
assign a number to this POI. the key Press CHANGE SETTING
and/or SET key to toggle through the numbers 1-20 in the upper
left of screen as described above.
_ _._yd
01
12:20
3D
Latitude and
Longitude Reading


Product specificaties

Merk: Celestron
Categorie: Navigator
Model: reTrace Deluxe 44857

Heb je hulp nodig?

Als je hulp nodig hebt met Celestron reTrace Deluxe 44857 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Navigator Celestron

Handleiding Navigator

Nieuwste handleidingen voor Navigator