CDA KG80 Handleiding

CDA Wastafel KG80

Lees hieronder de πŸ“– handleiding in het Nederlandse voor CDA KG80 (8 pagina's) in de categorie Wastafel. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Customer Care Department β€’ The Group Ltd. β€’ Harby Road β€’ Langar β€’ Nottinghamshire β€’ NG13 9HY
T : F : E : 01949 862 012 01949 862 003 customer.care@cda.eu www.cda.euW : www.cda.eu
Composite
Sinks
Use and Maintenance
2
Taking care of your sink
Your CDA sink is manufactured using material developed specifically to
withstand the rigours of everyday kitchen use. However, we advise you
to follow these precautions to keep the sink in pristine condition:
β€’ξ€– ξ€–Do not use a plastic washing-up bowl in the sink as grit and other
particles may become embedded in the bowl and scratch
or erode the sink surface. CDA specifically recommend the use of
wire sink-baskets and drainer-racks to help protect your sink. Take
care to not cut the plastic coating on these accessories with sharp
cutlery or the edges of pans, etc.
β€’ξ€– ξ€–Do not use neat bleach or other harsh cleaning agents on the metal
sink waste as this may cause tarnishing. This is especially important
if the waste is of the brass/brass finish type.
β€’ξ€– ξ€–Avoid dropping heavy or sharp objects into the sink as they may
scratch or damage the surface.
β€’ξ€– ξ€–The surface of the sink can be aξ€žected by certain chemicals e.g. neat
bleach, nail polish remover, paint stripper, solvents, brush cleaner and
insecticides. If any of these substances come into contact with the
sink, wipe oξ€ž immediately with a dry cloth, wash with mild detergent
and rinse with water.
β€’ξ€– ξ€–Do not use abrasive liquids, powders or steel pads to clean the sink
as they will damage the sink surface and make it more susceptible to
staining. The sink may be cleaned with a dilute bleach solution.
β€’ξ€– ξ€–Do not place very hot objects directly on the sink, place them on a
special surface (board) made from wood or heat-proof plastic, etc.
β€’ξ€– ξ€–In hard-water areas, a limescale deposit may build up on the sink.
The limescale may become stained by coloured foods such as coξ€žee
or red wine. If this occurs, we recommend use of a mild limescale
remover.
3
β€’ξ€– ξ€–Particularly stubborn organic stains can be removed eξ€žectively by
soaking the sink in a biological washing-powder solution, dishwasher
powder solution or diluted bleach.
β€’ξ€– ξ€–If the sink comes into contact with acidic materials, rinse immediately
with plenty of water and wipe with a soft dry cloth.
β€’ξ€– ξ€–Do not leave rusty objects in contact with the sink. Rust can cause
staining, cracking or even permanent damage to the sink surface.
β€’ξ€– ξ€–To avoid staining of the surface do not leave food or other materials
with corrosive properties such as juices, salt, vinegar, mustard etc. on
the sink for a long time.
β€’ξ€– ξ€–After using the sink, rinse it clean with warm soapy water and rinse
with clean water before wiping dry.
β€’ξ€– During installation, protect from scratches, scuξ€žs and other damage.
β€’ξ€– Do not overtighten or strain plumbing fittings.
β€’ξ€– ξ€–The moulding and edges of the sink must be absolutely level so
water flows oξ€ž the drainer.
To cut out the worktop:
β€’ξ€– Place the sink upside-down on the worktop where it will be mounted.
β€’ξ€– Draw the perimeter of the sink on the worktop with a pencil.
β€’ξ€– Remove the sink and draw a dotted line, 1 cm inside the perimeter.
β€’ξ€– Make the cut out with suitable tools along the dotted line.
Inserting the sink in the hole of the working surface:
β€’ξ€– ξ€–Inserting the sink in the hole of the working surface. Our sinks are not
equipped with pre-mounted hooks, but the hooks are provided inside
the sink’s package and they should be installed on the sink by the
installer.


Product specificaties

Merk: CDA
Categorie: Wastafel
Model: KG80

Heb je hulp nodig?

Als je hulp nodig hebt met CDA KG80 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden