CDA AS1CM Handleiding

CDA Wastafel AS1CM

Lees hieronder de 📖 handleiding in het Nederlandse voor CDA AS1CM (7 pagina's) in de categorie Wastafel. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
www.cda.eu
Composite
Sinks
Installation, Use and Maintenance
3
sink, wipe o immediately with a dry cloth, wash with mild detergent
and rinse with water.
Do not use abrasive liquids, powders or steel pads to clean the sink
as they will damage the sink surface and make it more susceptible to
staining. The sink may be cleaned with a dilute bleach solution.
Do not place very hot objects directly on the sink, place them on a
special surface (board) made from wood or heat-proof plastic, etc.
If the sink comes into contact with acidic materials, rinse immediately
with plenty of water and wipe with a soft dry cloth.
In hard-water areas, a limescale deposit may build up on the sink.
The limescale may become stained by coloured foods such as coee
or red wine. If this occurs, we recommend use of a mild limescale
remover.
Particularly stubborn organic stains can be removed eectively by
soaking the sink in a biological washing-powder solution, dishwasher
powder solution or diluted bleach.
Do not leave rusty objects in contact with the sink. Rust can cause
staining, cracking or even permanent damage to the sink surface.
To avoid staining of the surface do not leave food or other materials
with corrosive properties such as juices, salt, vinegar, mustard etc. on
the sink for a long time.
After using the sink, rinse it clean with warm soapy water and rinse
with clean water before wiping dry.
During installation, protect from scratches, scus and other damage.
Do not overtighten or strain plumbing fittings.
The moulding and edges of the sink must be absolutely level so
water flows o the drainer.
4
Installation
Before Installation
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowl are compatible with the cabinets
themselves.
Confirm that with the sink in position:
There is adequate space to install any taps or other required
accessories.
There is adequate space to install the waste pipework and that any
necessary modification to internal shelves to accommodate the waste
(and trap) is acceptable.
Access to any water stop-cock or other services will still be adequate
after the installation.
Cutting the tap hole
Only cut the tap hole from the underside of the sink.
Select the tap hole position based on whether left hand or right hand
drainer is required.
Locate the centre of the required tap hole and cut it out using a
suitable 35mm diameter hole cutter (available from most plumbers
merchants or DIY stores).
Caution: Ensure that the sink is safely supported around the hole
to be cut out.


Product specificaties

Merk: CDA
Categorie: Wastafel
Model: AS1CM
Kleur van het product: Wit
Breedte: 860 mm
Diepte: 500 mm
Hoogte: 200 mm
Soort wastafel: Opbouwwasbak
Vorm gootsteen: Rechthoekig
Materiaal gootsteen: Graniet
Aantal gootstenen: 1 kommen
Kraan inclusief: Nee

Heb je hulp nodig?

Als je hulp nodig hebt met CDA AS1CM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden