Caso 3162 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Caso 3162 (2 pagina's) in de categorie Keukenmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Assembling the Pasta Maker
1. Undo the front
cover screw and
remove the cover
of the accessory
drive shaft.
2. Put on the
desired pasta
attachment
and tighten the
screw again.
Pasta roller
Pasta width:
up to 140 mm
Fettuccinecutter
Pasta width: 6.5 mm
Spaghetti cutter
Pasta width: 2 mm
Pull the adjustment knob
straight out and turn it to
adjust the pasta thickness.
Roller
adjustment Recommended use
7-8 Knead dough
5-6 Egg noodles
3-4 Spaghetti, fettuccine, lasagne noodles
0-2 Thin fettuccine, tortellini, linguini
Setting the pasta thickness
EN
Braukmann GmbH, Raieisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info@caso-design.de, www.caso-design.de
EN
1. Prepare the pasta dough and divide
it into pieces thatt into the pasta
roller.
2. Check that the pasta roller isrmly
mounted on the motor head.
3. Set the desired pasta thickness as
described above.
4. Plug the power plug into the outlet.
5. Tap the button and select a speed
level. We recommend speed level
2–6.
6. Start the appliance by pressing the
button.
7. Put theattened dough into the
rollers to knead it. Fold the dough in
half and roll again. Repeat this pro-
cess until the dough is smooth and
pliable and covers the entire width
of the roller. Reduce the roller setting
from pass to pass until you reach the
desired pasta thickness.
8. Replace the
roller with a
cutting attach-
ment of your
choice. Feed
the rolled
dough sheets
through the cutting attachment.
9. After use, switch o the appliance
with the button and pull the plug
out of the outlet.
Dust the pasta lightly with our during rolling and
cutting to make it drier and easier to separate.
The attachments are only suitable for making pasta or
rolling and cutting fondant. Do not cut or roll out any
other products with the Pasta Maker attachments.
Unplug the Pasta Maker from the power outlet before
assembling/disassembling it.
Braukmann GmbH, Raieisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info@caso-design.de, www.caso-design.de
Using the Pasta Maker
After using the Pasta Maker
1. Undo the screw to remove the
pasta attachment and ret the drive
shaft cover to the appliance.
2. To avoid damage to the appli-
ance, do not wash or immerse
the attachment in water or other
liquids. Do not clean in the dish-
washer. Use the enclosed clea-
ning brushes for cleaning.
EN


Product specificaties

Merk: Caso
Categorie: Keukenmachine
Model: 3162

Heb je hulp nodig?

Als je hulp nodig hebt met Caso 3162 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Keukenmachine Caso

Handleiding Keukenmachine

Nieuwste handleidingen voor Keukenmachine