Canon PowerShot A2200 Handleiding
Canon
Digitale camera
PowerShot A2200
Lees hieronder de 📖 handleiding in het Nederlandse voor Canon PowerShot A2200 (201 pagina's) in de categorie Digitale camera. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/201
Camera User Guide
ENGLISH
• Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.
• Reading this guide will help you learn to use the camera
properly.
• Store this guide safely so that you can use it in the future.
2
Check if the following items are included in your camera package.
If anything is missing, contact the retailer where you purchased the camera.
Using the Manuals
Also refer to the manuals on DIGITAL CAMERA Manuals Disk.
•Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many
features to shoot more challenging photos.
•Software Guide
Read when you want to use the included software.
•A memory card is not included.
•Adobe Reader is required to view the PDF manuals. Microsoft Word/
Word Viewer can be installed to view the Word manuals (required only for
manuals for the Middle East).
Checking the Package Contents
Camera Battery Pack NB-8L
(with Terminal Cover)
Battery Charger
CB-2LA/CB-2LAE
Wrist Strap
WS-800
Interface Cable
IFC-400PCU
AV Cable
AVC-DC400
AV Cable
AVC-DC300
Warranty
System Booklet
Getting Started
DIGITAL CAMERA
Solution Disk
3
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon
Warranty System Booklet supplied with your camera. For Canon Customer
Support contacts, please see the Warranty System Booklet.
LCD Monitor (Screen)
•The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
•The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Read This First
What Do You Want to Do?
5
1
zLook at my pictures ......................................................................27
zEasy playback (Easy Mode).........................................................29
zAutomatically play back pictures (slideshow).............................116
zLook at my pictures on a TV ......................................................120
zLook at my pictures on a computer. .............................................34
zQuickly search pictures ......................................................114 115,
zErase pictures ...................................................................... , 28 125
View
E
zShoot movies ...............................................................................30
zView movies .................................................................................32
Shoot/View Movies
2
zEasily print pictures ....................................................................138
Print
zSave images to a computer .........................................................34
Save
3
zTurn off sounds ............................................................................50
zUse the camera abroad........................................................ , 39 155
zUnderstand what is displayed on the screen .............................171
Other
6
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Table of Contents ..............................6
Conventions Used in This Guide .......9
Safety Precautions...........................10
Charging the Battery........................14
Compatible Memory Cards
(Sold Separately)...........................16
Inserting the Battery and Memory
Card...............................................16
Setting the Date and Time...............19
Setting the Display Language..........21
Formatting Memory Cards ...............22
Pressing the Shutter Button.............23
Taking Pictures (Smart Auto)...........24
Viewing Images ...............................27
Erasing Images................................28
Shooting or Viewing Images in
Easy Mode.....................................29
Shooting Movies ..............................30
Viewing Movies................................32
Transferring Images to a Computer
for Viewing.....................................34
Accessories .....................................38
Separately Sold Accessories...........39
Components Guide..........................42
Screen Display.................................46
Indicator ...........................................47
FUNC. Menu – Basic Operations ....48
MENU – Basic Operations .............. 49
Changing the Sound Settings ......... 50
Adjusting the Screen Brightness ..... 52
Returning the Camera to Default
Settings ......................................... 53
Power Saving Function
(Auto Power Down)....................... 54
Clock Functions............................... 54
Turning the Flash Off ...................... 56
Zooming in More Closely on
Subjects (Digital Zoom)................. 57
Inserting the Date and Time............ 59
Using the Self-Timer ....................... 60
Changing the Recording Pixel
Setting (Image Size) ..................... 63
Changing the Compression
Ratio (Image Quality) .................... 63
Shooting in Various Conditions ....... 68
Easily Changing the Brightness and
Color When Shooting
(Live View Control)........................ 71
Shooting in Discreet Mode.............. 72
Adding Effects and Shooting
(Creative Filters) ........................... 72
Detecting a Face and Shooting
(Smart Shutter) ............................. 77
Shooting Long Exposures............... 81
Table of Contents
1 Getting Started.................. 13
2 Learning More ...................41
3 Shooting with Commonly
Used Functions .................55
4 Adding Effects and Shooting
in Various Conditions .......67
Table of Contents
7
Shooting in Program AE ................. 84
Adjusting the Brightness
(Exposure Compensation) ............ 85
Turning the Flash On ...................... 85
Adjusting the White Balance ........... 86
Changing the ISO Speed................ 87
Correcting the Brightness and
Shooting (i-Contrast)..................... 88
Continuous Shooting....................... 89
Changing the Tone of an Image
(My Colors) ................................... 90
Shooting Close-ups (Macro) ........... 91
Shooting Far Away Subjects
(Infinity)......................................... 91
Changing the AF Frame Mode........ 92
Choosing the Subject to Focus On
(Tracking AF) ................................ 94
Magnifying the Focal Point.............. 95
Shooting with the AF Lock .............. 96
Shooting with Servo AF .................. 97
Choosing the Person to Focus On
(Face Select) ................................ 98
Changing the Metering Method....... 99
Shooting with the AE Lock ............ 100
Shooting with the FE Lock ............ 100
Shooting with Slow Synchro ......... 101
Red-Eye Correction ...................... 102
Checking for Shut Eyes ................ 103
Shooting Using a TV as
the Display.................................. 103
Changing the Movie Mode............ 106
Shoot Movies That Look Like a
Miniature Model
(Miniature Effect)......................... 106
Changing the Image Quality..........108
AE Lock/Exposure Shift.................109
Other Shooting Functions.............. 110
Editing ........................................... 111
Quickly Searching Images.............114
Searching for Images Using the
Jump Display............................... 115
Viewing Slideshows.......................116
Checking the Focus.......................117
Magnifying Images ........................ 118
Displaying Various Images
(Smart Shuffle) ............................119
Changing Image Transitions .........120
Viewing Images on a TV ...............120
Protecting Images ......................... 122
Erasing All Images ........................125
Tagging Images as Favorites........127
Organizing Images by Category
(My Category) .............................128
Rotating Images ............................130
Resizing Images............................131
Trimming ....................................... 132
Correcting the Brightness
(i-Contrast) .................................. 134
Correcting the Red-Eye Effect.......135
Printing Images .............................138
Choosing Images for Printing
(DPOF)........................................145
5 Choosing Settings
Yourself..............................83
6 Using Various Functions for
Shooting Movies .............105
7 Using Various Playback and
Editing Functions ........... 113
8 Printing............................ 137
Table of Contents
8
Changing Camera Settings............150
Changing Shooting Function
Settings........................................157
Changing Playback Function
Settings........................................161
Using Household Power ................164
Troubleshooting.............................165
List of Messages That Appear
on the Screen.............................. 169
Information Displayed
on the Screen.............................. 171
Handling Precautions .................... 175
Functions Available in Each
Shooting Mode............................ 176
Menus ........................................... 184
Specifications ................................ 194
Index ............................................. 198
9 Customizing Camera
Settings............................149
10 Useful Information..........163
9
•Icons are used in the text to represent the camera buttons and dials.
•Language that displays on the screen appears inside [ ] (square brackets).
•The directional buttons and FUNC./SET button are represented by the
following icons.
•: Things you should be careful about
•: Troubleshooting tips
•: Hints for getting more out of your camera
•: Supplemental information
•(p. xx): Reference pages (“xx” stands for a page number)
•This guide assumes all functions are at their default settings.
•The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
•Functions that differ depending on the camera model are indicated with the
following icons:
Functions and precautions for the PowerShot A3300 and
A3350 IS only.
Functions and precautions for the PowerShot A3200 IS only.
Functions and precautions for the PowerShot A2200 only.
Explanations without these icons apply to all three models.
•PowerShot A3300 IS screenshots and illustrations are used for the
explanations in this guide.
Conventions Used in This Guide
Right button
FUNC./SET buttonUp button
Left button
Down button
10
•Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
•The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
•Be sure to also check the guides included with any separately sold accessories you
use.
Warning Denotes the possibility of serious injury or death.
•Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
•Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
•Use only recommended power sources.
•Do not attempt to disassemble, alter or apply heat to the product.
•Avoid dropping or subjecting the product to severe impacts.
•To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
•Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
•Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
•Do not let the product come into contact with water (e.g. sea water) or other
liquids.
•Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
•Use only the recommended battery.
•Do not place the battery near or in direct flame.
•Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
•Do not handle the power cord with wet hands.
•Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
•Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery acid
contacts eyes, mouth, skin or clothing, immediately flush with water.
Safety Precautions
Safety Precautions
11
•Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
•Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio
CD player (music player) could damage the speakers.
Caution Denotes the possibility of injury.
•Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
•Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
•The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
Caution Denotes the possibility of damage to the equipment.
•Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
•When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
•In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
Safety Precautions
12
•Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
•Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
•Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
•Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
•Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
•When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
•Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
13
Getting Started
This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view images in
Easy mode, how to shoot and view movies, and how to transfer images
to a computer.
Attaching the Strap/Holding the Camera
•Attach the included strap and wrap it around your wrist to avoid dropping
the camera during use.
•Keep your arms tight against your body while holding the camera firmly by
the sides when shooting. Be sure that your fingers do not block the flash.
1
Strap
14
Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
zAlign the o marks on the battery and
charger, then insert the battery by sliding it
in ( ) and down ( ).
Charge the battery.
zFor CB-2LA: Flip out the plug ( ) and
plug the charger into a power outlet ( ).
zFor CB-2LAE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
XThe charge lamp lights orange and
charging starts.
XThe charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 30 minutes.
Remove the battery.
zUnplug the battery charger from the power
outlet, then remove the battery by sliding it
in ( ) and up ( ).
Charging the Battery
CB-2LA
CB-2LAE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
Charging the Battery
15
Number of Possible Shots
• The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge
state.
Number of Shots Approx. 230 Approx. 250 Approx. 280
Playback Time Approx. 5 hours Approx. 6 hours Approx. 6 hours
Display Summary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Recharge the battery.
Using the battery and charger effectively
•Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
•How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
•The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
•The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
•If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
Attach the cover to a charged battery so that
the o mark is visible.
16
The cards below can be used without restrictions on their capacities.
•SD memory cards*
•SDHC memory cards*
•SDXC memory cards*
•MultiMediaCards
•MMCplus memory cards
•HC MMCplus memory cards
* This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
zIf the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
zSlide the cover ( ) and open it ( ).
Insert the battery.
zInsert the battery as shown until it locks
into place with a click.
zBe sure to insert the battery in the correct
direction or it will not properly lock into
place.
Depending on your computer’s OS version, SDXC memory cards may not
be recognized even when using a commercially available card reader.
Check to make sure that your OS supports SDXC memory cards
beforehand.
Compatible Memory Cards (Sold Separately)
Inserting the Battery and Memory Card
Inserting the Battery and Memory Card
17
Insert the memory card.
zInsert the memory card as shown until it
locks into place with a click.
zBe sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the camera.
Close the cover.
zClose the cover ( ), and press downward
as you slide it until it clicks into place ( ).
Terminal
Label
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards have a write-protect tab. If this tab is in the
locked position, [Memory card locked] will appear on the screen and you will not
be able to take or erase images.
Inserting the Battery and Memory Card
18
Removing the Battery and Memory Card
Remove the battery.
zOpen the cover and press the battery lock
in the direction of the arrow.
XThe battery will pop up.
Remove the memory card.
zPush the memory card in until you hear a
click, then slowly release it.
XThe memory card will pop up.
Number of Shots per Memory Card
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Memory Card 4 GB 16 GB
Number of Shots
Approx. 935
Approx. 1058
Approx. 1058
Approx. 3830
Approx. 4334
Approx. 4334
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting mode (p. 24).
Number of shots that
can be taken
19
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
zPress the ON/OFF button.
XThe Date/Time screen will appear.
Set the date and time.
zPress the qr buttons to choose an option.
zPress the op buttons to set a value.
Complete the setting.
zPress the m button.
XOnce the date and time have been set, the
Date/Time screen will close.
zPressing the ON/OFF button will turn off
the camera.
Setting the Date and Time
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose in Step 2 and press the op buttons to choose , you will set
the time to daylight saving (1 hour ahead).
Setting the Date and Time
20
Changing the Date and Time
You can change the current date and time settings.
Display the menu.
zPress the n button.
Choose [Date/Time] from the 3
tab.
zMove the zoom lever to choose the 3 tab.
zPress the op buttons to choose
[Date/Time], then press the m button.
Change the date and time.
zFollow Steps 2 and 3 on p. 19 to adjust the
setting.
zPress the n button to close the menu.
Date/Time battery
•The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack
has been removed.
•By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 39) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
•If the date/time battery is depleted, the Date/Time screen will appear when you
turn the camera on. Follow the steps on p. 19 to set the date and time.
21
You can change the language that displays on the screen.
Enter Playback mode.
zPress the 1 button.
Display the settings screen.
zPress and hold the m button, then
immediately press the n button.
Set the display language.
zPress the opqr buttons to choose a
language, then press the m button.
XOnce the display language has been set,
the settings screen will close.
Setting the Display Language
What if the clock appears when the m button is pressed?
The clock will appear if too much time passes between pressing the m button
and the n button in Step 2. If the clock appears, press the m button to
remove the clock and repeat Step 2.
You can also change the display language by pressing the n button
to choose [Language] from the 3 tab.
22
Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera.
Formatting (initializing) a memory card erases all data on the memory card.
As you cannot retrieve the erased data, exercise adequate caution before
formatting the memory card.
Display the menu.
zPress the n button.
Choose [Format].
zMove the zoom lever to choose the 3 tab.
zPress the op buttons to choose [Format],
then press the m button.
Choose [OK].
zPress the qr buttons to choose [OK], then
press the m button.
Format the memory card.
zPress the op buttons to choose [OK],
then press the m button.
XThe memory card will be formatted.
Formatting Memory Cards
24
Since the camera can determine the subject and shooting conditions, you can
let it automatically select the best settings for the scene and just shoot. The
camera can also detect and focus on faces, setting the color and brightness
to optimal levels.
Turn on the camera.
zPress the ON/OFF button.
XThe start-up screen will appear.
Enter A mode.
zSet the mode dial to A.
zWhen you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
XThe icon for the determined scene will
appear in the upper right of the screen.
XThe camera will focus on detected
subjects and display frames on them.
Compose the shot.
zMoving the zoom lever toward i
(telephoto) will zoom in on your subject,
making it appear larger. Moving the lever
toward j (wide angle) will zoom out from
your subject, making it appear smaller.
(The zoom bar showing the zoom position
appears on the screen.)
Focus.
zPress the shutter button halfway to focus.
Taking Pictures (Smart Auto)
Taking Pictures (Smart Auto)
26
•What if a flashing appears?
Attach the camera to a tripod so that the camera does not move and blur the
image.
•What if the camera does not play any sounds?
Pressing the l button while turning on the camera power will turn off all
sounds. To turn the sounds on, press the n button to choose [Mute] from
the 3 tab, then press the qr buttons to choose [Off].
•What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle (j), and
approximately 50 cm – 2.0 m (1.6 – 6.6 ft) at maximum telephoto (i).
•What if the camera beeps once when the shutter button is pressed
halfway?
Your subject may be too close. Move the following distances away from your
subject and shoot:
When at maximum wide angle (j): Approximately 3.0 cm (1.2 in.) or more.
When at maximum telephoto (i): Approximately 90 cm (3.0 ft.) or more
, and approximately 80 cm (2.6 ft.) or more .
•What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
•What if the h icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
What if an icon appears in the upper right of the screen?
The icon for the determined scene will appear in the upper right of the screen. For
details on the icons that appear, see “Scene Icons” (p. 172).
Choosing the subject to focus on (Tracking AF)
After pressing the o button and displaying , point the camera so that is
on the subject you want to focus on. Press and hold the shutter button halfway to
display a blue frame where focus and exposure will be maintained (Servo AF).
Press the shutter button fully to shoot.
28
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
zPress the 1 button.
XThe last image you took will appear.
Choose an image to erase.
zPress the qr buttons to display an image
to erase.
Erase the image.
zPress the p button.
X[Erase?] appears on the screen.
zPress the qr buttons to choose [Erase],
then press the m button.
XThe displayed image will be erased.
zTo exit instead of erasing, press the qr
buttons to choose [Cancel], then press the
m button.
Erasing Images
29
In Easy mode, operational instructions are displayed on the screen, and the
camera is set so that only the buttons and the zoom lever explained on this
page are functional. This prevents incorrect operation of the camera, allowing
even beginners to take worry-free pictures.
Shooting
zSet the mode dial to 9.
zFollow Steps 3 – 5 on pp. 24 25 – to shoot
(no sound will play).
zPress the r button to turn off the flash. !
will appear on the screen. Pressing the r
button again turns on the flash and
appears on the screen. The flash will
automatically fire in low light conditions.
Viewing
zPress the 1 button, then press the qr
buttons to switch images.
zPress the 1 button, then press the m
button, and all the shots you have taken
will display for about 3 seconds each.
Press the m button again to stop the
slideshow.
zTo erase images, follow the steps on p. 28.
Shooting or Viewing Images in Easy Mode
30
The camera can automatically select all settings so that you can shoot movies
just by pressing the shutter button.
Enter E mode.
zSet the mode dial to E.
Compose the shot.
zMoving the zoom lever toward i will
zoom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
Focus.
zPress the shutter button halfway to focus.
XWhen the camera focuses, it will beep
twice.
Shoot.
zPress the shutter button fully.
Shooting Movies
Remaining Time
Shooting Movies
31
XRecording will start, and [ Rec] and the
elapsed time will appear on the screen.
zOnce shooting begins, take your finger off
the shutter button.
zIf you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
zDo not touch the microphone while
shooting.
zDo not press any buttons other than the
shutter button while shooting. The sound
the buttons make will be recorded in the
movie.
Stop shooting.
zPress the shutter button fully again.
XThe camera will beep once and stop
shooting the movie.
XThe movie will record to the memory card.
XShooting will automatically stop when the
memory card fills.
Elapsed Time
Microphone
Microphone
Zooming while shooting
Pressing the zoom lever while shooting will zoom in on or out from the subject.
However, movies shot at zoom factors that appear in blue will be coarse.
Operation sounds will be recorded.
Viewing Movies
32
Shooting Time
• Shooting times are based on default settings.
• Maximum clip length is approx. 10 minutes.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
You can view the movies you have shot on the screen.
Enter Playback mode.
zPress the 1 button.
XThe last image you took will appear.
X appears on movies.
Choose a movie.
zPress the qr buttons to choose a movie,
then press the m button.
zThe movie control panel will appear.
Memory Card 4 GB 16 GB
Shooting Time Approx. 22 min. 5 sec. Approx. 1 hr. 30 min. 30 sec.
Viewing Movies
Viewing Movies
33
Play the movie.
zPress the qr buttons to choose
(Play), then press the m button.
XThe movie will play.
zIf you press the m button, you can pause
or resume playback.
zPress the op buttons to adjust the
volume.
XAfter the movie finishes, appears.
How can I play back movies on a computer?
Install the included software (p. 35).
•When watching a movie on a computer, frames may drop, it may not play
smoothly, and the audio may stop suddenly depending on the computer’s
capabilities.
•If you use the supplied software to copy the movie back onto the memory card,
you can play back the movie smoothly with the camera. For enhanced playback
you can also connect the camera to a TV.
Transferring Images to a Computer for Viewing
35
Preparations
Windows Vista and Mac OS X (v10.5) are used for these explanations.
Install the Software.
Windows
Place the CD in the computer’s CD-
ROM drive.
zPlace the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
zClick [Easy Installation] and follow the
on-screen instructions to proceed with the
installation.
zIf the [User Account Control] window
appears, follow the on-screen instructions
to proceed.
When the installation finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
zRemove the CD-ROM when your desktop
screen appears.
Macintosh
Place the CD in the computer’s CD-
ROM drive.
zPlace the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
zDouble-click the on the CD.
zClick [Install], and follow the on-screen
instructions to proceed with the
installation.
Transferring Images to a Computer for Viewing
36
Connect the camera to the
computer.
zTurn off the camera.
zOpen the cover and insert the included
interface cable’s smaller plug (p. 2) firmly
into the camera terminal in the direction
shown.
zInsert the interface cable’s larger plug into
the computer. For connection details, refer
to the user guide provided with the
computer.
Turn on the camera.
zPress the 1 button to turn on the camera.
Open CameraWindow.
Windows
zClick [Downloads Images From Canon
Camera using Canon CameraWindow].
XCameraWindow will appear.
zIf CameraWindow does not appear, click
the [Start] menu and choose [All
Programs], followed by [Canon Utilities],
[CameraWindow] and [CameraWindow].
Macintosh
XCameraWindow will appear when you
establish a connection between the
camera and computer.
zIf CameraWindow does not appear, click
the CameraWindow icon on the Dock (the
bar which appears at the bottom of the
desktop).
Transferring Images to a Computer for Viewing
37
Transfer and View Images
zClick [Import Images from Camera], and
then click [Import Untransferred Images].
XAll images not previously transferred will
transfer to the computer. Transferred
images will be sorted by date and saved in
separate folders in the Pictures folder.
zClose CameraWindow when image
transfer is complete.
zTurn off the camera and unplug the cable.
zFor details on how to view images using a
computer, refer to the Software Guide.
For Windows 7, use the following steps to display CameraWindow.
Click on the task bar.
In the screen that appears, click the link to modify the program.
Choose [Downloads Images From Canon Camera using Canon
CameraWindow] and click [OK].
Double click .
You can transfer images even without using the image transfer function in
the included software by simply connecting your camera to a computer.
There are, however, the following limitations.
•It may take a few minutes from when you connect the camera to the
computer until you can transfer images.
•Images shot in the vertical orientation may be transferred in the horizontal
orientation.
•Protection settings for images may be lost when transferred to a
computer.
•There may be problems transferring images or image information
correctly depending on the version of the operating system in use, the file
size, or the software in use.
•Some functions in the included software may not be available, such as
editing movies, and transferring images to the camera.
38
Accessories
Interface Cable
IFC-400PCU*
AV Cable AVC-DC400*
DIGITAL CAMERA
Solution Disk
Wrist Strap
WS-800
Supplied with Camera
USB card reader
Windows/Macintosh
TV
Memory Card
Canon-Brand PictBridge Compliant Printers
*Also available for purchase separately.
Battery Charger
CB-2LA/CB-2LAE*
Battery Pack NB-8L with
Terminal Cover*
AV Cable AVC-DC300*
39
The following camera accessories are sold separately. Some accessories are
not sold in some regions, or may no longer be available.
Power Supplies
Battery Charger CB-2LA/2LAE
zA charger for charging Battery Pack
NB-8L.
Battery Pack NB-8L
zRechargeable lithium-ion battery.
AC Adapter Kit ACK-DC60
zThis kit lets you power the camera using
household power. Recommended for
powering the camera for an extended
period of time or when connecting to a
computer or printer. Cannot be used to
charge the camera battery.
Flash
High-Power Flash HF-DC1
zThis externally mounted flash can be used
to capture photographic subjects that are
too distant for the built-in flash to
illuminate.
Separately Sold Accessories
Using Accessories Abroad
The battery charger and the AC adapter kit can be used in regions that have
100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Separately Sold Accessories
40
Printers
Canon-Brand PictBridge Compliant
Printers
zBy connecting your camera to a Canon-
brand PictBridge compliant printer, you
can print your images without having to
use a computer.
For more information, visit your nearest
Canon retailer.
SELPHY series
Inkjet Printers
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
42
Components Guide
Lens
Mode Dial
Zoom Lever
Shooting: i (Telephoto) / j (Wide
Angle) (pp. 24, 30, 57)
Playback: k (Magnify) / (Index) g
(pp. 114, 118)
Shutter Button (p. 23)
ON/OFF Button (p. 19)
Microphone (p. 31)
Flash , (pp. 56 85)
Lamp (pp. 60, 61, 62, 80, 157)
Tripod Socket
DC Coupler Terminal Cover (p. 164)
Memory Card / Battery Cover (p. 16)
Strap Mount (p. 13)
A/V OUT (Audio/Video Output) /
DIGITAL Terminal , , (pp. 36 120 138)
Components Guide
43
Lens
Mode Dial
Zoom Lever
Shooting: i (Telephoto) / j (Wide
Angle) (pp. 24, 30, 57)
Playback: k (Magnify) / (Index) g
(pp. 114, 118)
Shutter Button (p. 23)
ON/OFF Button (p. 19)
Microphone (p. 31)
Flash , (pp. 56 85)
Lamp (pp. 60, , , , 61 62 80 157)
Tripod Socket
DC Coupler Terminal Cover (p. 164)
Memory Card / Battery Cover (p. 16)
A/V OUT (Audio/Video Output)
Terminal (p. 120)
DIGITAL Terminal , (pp. 36 138)
Strap Mount (p. 13)
Components Guide
44
Mode Dial
Use the mode dial to change the Shooting mode.
If you turn the mode dial while in Playback mode, the camera will switch to
Shooting mode.
Movie Mode
For shooting movies
(pp. 30, 105).
You can use the largest
possible portion of the
screen to shoot movies
(p. 108).
Special Scene Mode
You can shoot with the optimum
settings for the scene (p. 68).
P Mode
Choose settings yourself to take
various types of pictures (p. 84).
Creative Filters Mode
You can add various
effects to images when
shooting (p. 72).
Auto Mode
You can leave it to the camera
to select settings for fully
automatic shooting (p. 24).
Easy Mode
You can shoot just by pressing
the shutter button (p. 29).
Discreet Mode
You can shoot with the flash
disabled and all camera
sounds muted (p. 72).
Live View Control Mode
The brightness and color can be
easily set to your preferences for
shooting (p. 71).
Components Guide
45
Screen (LCD Monitor)
(pp. 46, 171 173),
Speaker
0 (Face Selector) Button (p. 98)
1 (Playback) Button (pp. 27, 113)
Indicator (p. 47)
l (Display) Button (p. 46)
n Button (p. 49)
b (Exposure Compensation) (p. 85) /
d o (Jump) (p. 115) / Button
e q (Macro) (p. 91) / Button
m FUNC./SET Button (p. 48)
h r (Flash) (pp. 85, 101) / Button
Q (Self-Timer) / (pp. 60, 61 62),
a (Single Image Erase) (p. 28) /
p Button
46
Switching the Display
You can change the screen display using the l button. Refer to p. 171
for details on information that appears on the screen.
Shooting
Playback
Screen Display
Information Display No Information Display
You can also switch the display by pressing the l button while the
image displays right after shooting. However, Simple Information Display is
not available. You can change the display that appears first by pressing the
n button, then choosing [Review info] from the 4 tab (p. 158).
Focus Check
Display (p. 117)
Detailed Information
Display
No Information
Display
Simple Information
Display
Indicator
47
Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual image
recorded may be different. Screen noise may appear and the movement of
the subject may appear somewhat jagged on the screen. This has no effect
on the recorded image.
Overexposure Warning during Playback
In Detailed Information Display (p. 46), overexposed areas of the image flash
on the screen.
Histogram during Playback
zThe graph that appears in Detailed
Information Display (p. 173) is called the
histogram. The histogram shows the
distribution of brightness in an image
horizontally, and the amount of brightness
vertically. When the graph approaches the
right side, the image is bright, but when it
approaches the left side, the image is dark,
and in this way you can judge the
exposure.
The indicator on the back of the camera (p. 45) will light or blink depending
on the camera’s status.
BrightDark
High
Low
Colors Status Operation Status
Green
Lights When connected to a computer (p. 36), display off (p. 155)
Blinks During camera start-up, recording/reading/transmitting
image data, when shooting long exposures (p. 81)
When the indicator blinks green, do not turn off the power, open the
memory card slot/battery cover, shake or jolt the camera. These actions
may corrupt the image data or cause the camera or memory card to
malfunction.
Indicator
48
You can set commonly used shooting functions using the FUNC. menu.
The menu items and options differ depending on the Shooting mode (pp. 176
– 183).
Display the FUNC. menu.
zPress the m button.
Choose a menu item.
zPress the op buttons to choose a menu
item.
XThe available options for the menu item
appear in the lower part of the screen.
zChoosing some menu items changes the
screen to display further menu options.
Choose an option.
zPress the buttons to choose an option.qr
zYou can also choose settings by pressing
the l button on options that display
.
Complete the setting.
zPress the m button.
XThe shooting screen will reappear and the
setting you chose will display on the
screen.
FUNC. Menu – Basic Operations
Menu Items
Available Options
49
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The options differ
depending on the Shooting mode and the Playback mode (pp. 184 – 193).
Display the menu.
zPress the n button.
Choose a tab.
zMove the zoom lever or press the qr
buttons to choose a tab.
Choose an item.
zPress the op buttons to choose an item.
zSome items require you to press the m or
r button to display a submenu in which
you change the setting.
Choose an option.
zPress the qr buttons to choose an option.
Complete the setting.
zPress the n button to restore the
normal screen.
MENU – Basic Operations
50
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
zPress the n button.
Choose [Mute].
zMove the zoom lever to choose the 3 tab.
zPress the op buttons to choose [Mute],
then press the qr buttons to choose [On].
zPress the n button to restore the
normal screen.
Changing the Sound Settings
•You cannot change the sound settings in .
•You can also mute camera sounds by holding down the l button and
turning on the power.
•If you mute camera sounds, the sound will also be muted when playing
back movies (p. 32). If you press the o button while playing back a
movie, the sound will play back, and you can adjust the volume with the
op buttons.
Changing the Sound Settings
51
Adjusting the Volume
Display the menu.
zPress the n button.
Choose [Volume].
zMove the zoom lever to choose the 3 tab.
zPress the op buttons to choose
[Volume], then press the m button.
Change the volume.
zPress the op buttons to choose an item,
then press the qr buttons to adjust the
volume.
zPress the n button twice to restore
the normal screen.
52
You can adjust the brightness of the screen.
Display the menu.
zPress the n button.
Choose [LCD Brightness].
zMove the zoom lever to choose the 3 tab.
zPress the op buttons to choose [LCD
Brightness].
Adjust the brightness.
zPress the qr buttons to adjust the
brightness.
zPress the n button twice to restore
the normal screen.
Adjusting the Screen Brightness
53
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
zPress the n button.
Choose [Reset All].
zMove the zoom lever to choose the 3 tab.
zPress the op buttons to choose [Reset
All], then press the m button.
Reset the settings.
zPress the qr buttons to choose [OK], then
press the m button.
XThe camera will reset to the default
settings.
Returning the Camera to Default Settings
Are there functions that cannot be reset?
•The [Date/Time] (p. 20), [Language] (p. 21), [Video System] (p. 120), [Time
Zone] (p. 155), and the image registered in [Start-up Image] (p. 152) in the 3
tab.
•The recorded custom white balance data (p. 86).
•The shooting mode chosen in K .(p. 68) or (p. 72)
•The Movie mode (p. 30).
54
To save battery power, the screen turns off, and the camera shuts down
automatically when it is not operated for a certain time.
Power Saving during Shooting
The screen will turn off approximately 1 minute after you stop operating the
camera. After about 2 more minutes, the lens will retract and the power will
turn off. When the screen has turned off but the lens has not yet retracted,
pressing the shutter button halfway (p. 23) turns on the screen and shooting
can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after you stop operating the
camera.
You can check the current time.
zPress and hold the m button.
XThe current time appears.
zIf you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the qr buttons to
change the display color.
zPress the m button again to cancel the
clock display.
•You can turn off the power saving function (p. 154).
•You can adjust the time before the screen turns off (p. 155).
Power Saving Function (Auto Power Down)
Clock Functions
When the camera power is off, press and hold the m button, then press
the ON/OFF button to display the clock.
55
Shooting with Commonly
Used Functions
This chapter explains how to use common functions, such as the self-
timer, and how to turn off the flash.
•This chapter assumes that the camera is set to A mode. When shooting
in another mode, check which functions are available in that mode (pp. 176
– 183).
3
56
You can shoot with the flash turned off.
Press the r button.
Choose !.
zPress the qr buttons to choose !, then
press the m button.
XOnce set, ! will appear on the screen.
zTo turn the flash back on, follow the steps
above to choose .
Turning the Flash Off
What if a flashing appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, a flashing will appear on the screen. Attach the camera to a
tripod to prevent it from moving.
57
You can use the digital zoom to zoom up to to approximately 20x maximum
, and approximately 16x maximum and capture
subjects that are too far away for the optical zoom to enlarge.
However, depending on the recording pixel setting (p. 63) and zoom factor,
the images may appear coarse (the zoom factor will appear in blue).
Move the zoom lever toward i.
zHold the lever until zooming stops.
XZooming stops at the largest possible
zoom factor without image deterioration.
The zoom factor will appear on the screen
when you release the zoom lever.
Move it toward i again.
XThe digital zoom will zoom in even further
on the subject.
Zooming in More Closely on Subjects
(Digital Zoom)
A3300 IS A3200 IS A2200
Zoom Factor
Turning off the digital zoom
To turn off the digital zoom, press the button to choose [Digital Zoom] from n
the 4 tab, then choose [Off].
The focal lengths when using the optical zoom and digital zoom together
are as follows (all focal lengths are 35mm film equivalent):
Approximately 28 – 560 mm (28 – 140 mm when using the optical zoom
alone)
Approximately 28 – 448 mm (28 – 112 mm when using the optical zoom
alone)
A3300 IS A3200 IS
A2200
Zooming in More Closely on Subjects (Digital Zoom)
58
Digital Tele-Converter
The focal length of the lens can be set as follows:
Approximately 1.6x or approximately 2.0x
Approximately 1.7x or approximately 2.1x ,
This enables a faster shutter speed and less chance of camera shake than
the zoom (including digital zoom) used by itself at the same zoom factor.
However, a recording pixel setting (p. 63) of or will cause images to
appear coarse (the zoom factor will appear in blue).
Display the menu.
zPress the n button.
Choose [Digital Zoom].
zMove the zoom lever to choose the 4 tab.
zPress the op buttons to choose [Digital
Zoom].
Choose the setting.
zPress the qr buttons to choose a
magnification.
zPress the n button to complete the
setting and restore the shooting screen.
XThe view will be enlarged and the zoom
factor will appear on the screen.
zTo return to standard digital zoom, choose
[Digital Zoom] and the [Standard] option.
A3300 IS
A3200 IS A2200
•The focal lengths are as follows (35mm film equivalent):
Approximately 44.8 – 224 mm when using [1.6x], and approximately
56.0 – 280 mm when using [2.0x]
Approximately 47.6 – 238 mm when using [1.7x], and approximately
58.8 – 294 mm when using [2.1x]
Approximately 47.6 – 190 mm when using [1.7x], and approximately
58.8 – 235 mm when using [2.1x]
•The digital tele-converter cannot be used together with the digital zoom.
•The shutter speeds may be the same when at maximum telephoto (i),
and when zoomed in on the subject using Step 2 on p. 57.
A3300 IS
A3200 IS
A2200
59
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 19).
Display the menu.
zPress the n button.
Choose [Date Stamp].
zMove the zoom lever to choose the 4 tab.
zPress the op buttons to choose [Date
Stamp].
Choose the setting.
zPress the qr buttons to choose [Date] or
[Date & Time].
zPress the n button to complete the
setting and restore the shooting screen.
XOnce set, [DATE] will appear on the
screen.
Shoot.
XThe shooting date or time will be recorded
in the image’s lower right corner.
zTo restore to the original setting, choose
[Off] in Step 3.
Inserting the Date and Time
Using the Self-Timer
60
The self-timer can be used to shoot a group photo that includes the
photographer. The camera will shoot approximately 10 seconds after the
shutter button is pressed.
Press the p button.
Choose Ò.
zPress the op buttons to choose Ò, then
press the m button.
XOnce set, Ò will appear on the screen.
You can insert and print the shooting date in images which do not have an
embedded date and time as follows. However, if you do this for images with
an embedded date and time, the date and time may be printed twice.
•Use the DPOF print settings (p. 145) to print.
•Use the included software to print.
Refer to the Software Guide for details.
•Print using printer functions (p. 140).
Using the Self-Timer
Using the Self-Timer
61
Shoot.
zPress the shutter button halfway to focus
on the subject, then press it fully.
XWhen the self-timer starts, the lamp blinks
and the self-timer sound plays.
XTwo seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
zTo cancel shooting with the self-timer after
the countdown has started, press the p
button.
zTo restore the original setting, choose
in Step 2.
Using the Self-Timer to Prevent Camera Shake
The camera will shoot approximately 2 seconds after the shutter button is
pressed, preventing any camera shake that occurs when pressing the shutter
button.
Choose Î.
zFollow Step 2 on p. 60 to choose Î.
XOnce set, Î will appear on the screen.
zFollow Step 3 above to shoot.
You can change the delay and number of shots (p. 62).
Using the Self-Timer
62
Customizing the Self-Timer
You can set the delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Choose $.
zFollow Step 2 on p. 60 to choose $, then
press the n button immediately.
Choose the settings.
zPress the op buttons to choose [Delay]
or [Shots].
zPress the qr buttons to choose a value,
then press the m button.
XOnce set, $ will appear on the screen.
zFollow Step 3 on p. 61 to shoot.
What if the number of shots is set to two or more shots?
•Exposure and white balance settings are set with the first shot.
•If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
•If the memory card fills, shooting stops automatically.
When you set the delay for more than 2 seconds, the lamp and self-timer
sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).
63
You can choose from 5 recording pixel settings.
Choose the recording pixel setting.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe setting will appear on the screen.
zTo restore the original setting, choose
in Steps 1 – 2.
You can choose from the following 2 compression ratios (image quality):
(Fine), (Normal).
Choose the compression ratio
setting.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe setting will appear on the screen.
zTo restore the original setting, choose
in Steps 1 – 2.
Changing the Recording Pixel Setting
(Image Size)
If you choose , you cannot use the digital zoom (p. 57) or digital tele-
converter (p. 58).
Changing the Compression Ratio
(Image Quality)
Changing the Compression Ratio (Image Quality)
64
Approximate Values for Recording Pixels and Compression Ratio
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
Recording Pixels Compression
Ratio
Single Image Data
Size (Approx. KB)
Number of Shots per
Memory Card
(Approx. shots)
4 GB 16 GB
(Large)
16M/4608x3456
4093 935 3830
1956 1915 7844
(Medium 1)
8M/3264x2448
2060 1828 7487
980 3771 15443
(Medium 2)
2M/1600x1200
558 6352 26010
278 12069 49420
(Small)
0.3M/640x480
150 20116 82367
84 30174 123550
(Widescreen)
4608x2592
3069 1243 5094
1467 2567 10514
Recording Pixels Compression
Ratio
Single Image Data
Size (Approx. KB)
Number of Shots per
Memory Card
(Approx. shots)
4 GB 16 GB
(Large)
14M/4320x3240
3597 1058 4334
1719 2194 8985
(Medium 1)
7M/3072x2304
1897 1978 8101
902 4022 16473
(Medium 2)
2M/1600x1200
558 6352 26010
278 12069 49420
(Small)
0.3M/640x480
150 20116 82367
84 30174 123550
(Widescreen)
4320x2432
2700 1403 5746
1291 2873 11766
A3300 IS
A3200 IS A2200
Changing the Compression Ratio (Image Quality)
65
Approximate Values for Paper Size
z For sending images as e-mail
attachments.
z For displaying on wide-screen HD TVs
with an aspect ratio of 16:9.
A2 (16.5 x 23.4in.)
A3 – A5
(11.7 x
16.5 – 5.8 x 8.3in.)
5 x 7in.
Postcard size
3.5 x 5in.
66
67
Adding Effects and Shooting
in Various Conditions
This chapter explains how to add effects and how to shoot in various
conditions.
4
68
The camera will select the necessary settings for the conditions in which you
wish to shoot when you choose the matching mode.
Enter K mode.
zSet the mode dial to K.
Choose a Shooting mode.
zAfter pressing the m button, press the
op buttons to choose the following:
I
zPress the qr buttons to choose a
Shooting mode, then press the m button.
Shoot.
Take shots with reduced blur
(Blur Reduction)
zLets you shoot with reduced camera shake
and subject blur.
I Take portraits (Portrait)
zProduces a soft effect when
photographing people.
Shooting in Various Conditions
A3300 IS A3200 IS
A2200
A2200
Shooting in Various Conditions
69
JTake landscapes (Landscape)
zLets you shoot majestic landscapes with a
real sense of depth.
V Take shots of kids and pets
(Kids&Pets)
zLets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
zMove approximately 1 m (3.3 ft.) or more
away from your subject and shoot.
Take shots in low light conditions
(Low Light)
zLets you take shots in dark places with
reduced camera shake and subject blur.
w Take shots of people at the beach
(Beach)
zLets you take shots of brightly lit people on
sandy beaches where the reflected
sunlight is strong.
OTake shots of foliage (Foliage)
zLets you shoot trees and leaves, such as
new growth, autumn leaves or blossoms,
in vivid colors.
Shooting in Various Conditions
70
P Take shots of people in snow
(Snow)
zLets you take bright, natural-colored shots
of people against snowy backgrounds.
t Take shots of fireworks
(Fireworks)
zLets you take shots of fireworks in vivid
colors.
In t mode, attach the camera to a tripod to prevent the camera from
moving and blurring the image. Additionally, you should set [IS Mode] to
[Off] when shooting with a tripod (p. 160).
•The recording pixel setting is fixed in the following modes:
: (2304 x 1728 pixels)
(2144 x 1608 pixels)
: (2144 x 1608 pixels)
•In V mode, images may appear coarse because the ISO speed (p. 87)
is increased to match the shooting conditions.
A3300 IS A3200 IS
A3300 IS
A3200 IS A2200
A2200
71
You can easily change the brightness, color and tone to match your
preferences when shooting.
Set the camera to mode.
zSet the mode dial to .
Press the m button.
XThe setting screen will appear.
Adjust the setting.
zPress the op buttons to choose an
option, then press the qr buttons while
watching the screen to adjust the setting.
zPress the m button.
Shoot.
Easily Changing the Brightness and Color
When Shooting (Live View Control)
Brightness You can adjust the brightness of the image. The more to the right, the
brighter the image gets, the more to the left, the darker the image gets.
Color You can change the color of the image. The more to the right, the more
vivid the image gets, the more to the left, the more neutral the image gets.
Tone
You can adjust the tone of the image.The more to the right, the stronger the
warm red tones get, the more to the left, the the stronger the cool blue tones
get.
72
You can shoot with camera sounds muted, and the flash and lamp
deactivated. Use this mode in areas where camera sounds, lights and flash
are not permitted.
Set the camera to mode.
zSet the mode dial to .
Shoot.
You can add various effects to images when shooting.
Set the camera to mode.
zSet the mode dial to .
Choose a Shooting mode.
zAfter pressing the m button, press the
op buttons to choose .
zPress the qr buttons to choose a
Shooting mode, then press the m button.
Shoot.
Shooting in Discreet Mode
When the camera is set to mode, sounds will remain muted even when
in Playback mode. Operation sounds will be muted, and audio will not play
back when viewing movies.
Adding Effects and Shooting
(Creative Filters)
Since you may not achieve the expected results with images shot in ,
, , and , try taking some test shots first.
Adding Effects and Shooting (Creative Filters)
73
Shoot images with vivid colors
(Super Vivid)
zLets you take shots with vivid, intense
colors.
Take posterized shots
(Poster Effect)
zLets you take shots that look like an old
poster or illustration.
Shoot with the Effects of a Fish-Eye Lens (Fish-
eye Effect)
Lets you shoot with the distorting effect of a fish-eye lens.
Choose .
zFollow Steps 1 – 2 on p. 72 to choose .
Choose an effect level.
zPress the l button.
X[Effect Level] will appear on the screen.
zPress the qr buttons to choose an effect
level, then press the l button.
XYou can check the effect on the screen.
Shoot.
Adding Effects and Shooting (Creative Filters)
74
Take Shots That Look Like a Miniature Model
(Miniature Effect)
Blurs chosen portions in the top and bottom of an image to produce the effect
of a miniature model.
Choose .
zFollow Steps 1 – 2 on p. 72 to choose .
XA white frame (the area that will not be
blurred) appears on the screen.
Choose the area to keep in focus.
zPress the l button.
zMove the zoom lever to change the frame
size, and press the op buttons to change
the frame position, then press the l
button.
Shoot.
•If you press the m button in Step 2, the horizontal/vertical orientation of
the frame will switch, and you can press the qr buttons to change the
frame position when it is displayed vertically.
•Holding the camera vertically will change the orientation of the frame.
Adding Effects and Shooting (Creative Filters)
75
Shoot with the Effects of a Toy Camera
(Toy Camera Effect)
This effect darkens and blurs the corners of the image, and changes the
overall color so that it looks like an image shot with a toy camera.
Choose .
zFollow Steps 1 – 2 on p. 72 to choose .
Choose a color tone.
zPress the l button.
X[Color Tone] will appear on the screen.
zPress the qr buttons to choose a color
tone, then press the l button.
XYou can check the color tone on the
screen.
Shoot.
Standard Images will look like they were shot with a toy camera.
Warm Gives images a warmer tone than [Standard].
Cool Gives images a cooler tone than [Standard].
Adding Effects and Shooting (Creative Filters)
76
Shooting in Monochrome
You can shoot images in black and white, sepia or blue and white.
Choose .
zFollow Steps 1 – 2 on p. 72 to choose .
Choose a color tone.
zPress the l button.
X[Color Tone] will appear on the screen.
zPress the qr buttons to choose a color
tone, then press the l button.
XYou can check the color tone on the
screen.
Shoot.
B/W Lets you shoot black and white images.
Sepia Lets you shoot sepia toned images.
Blue Lets you shoot blue and white images.
77
Detecting a Smile and Shooting
The camera will shoot, even without pressing the shutter button, when it
detects a smile.
Choose .
zFollow Steps 1 – 2 on p. 68 to choose ,
then press the l button.
zPress the qr buttons to choose , then
press the l button.
XThe camera will enter shooting stand-by,
and [Smile Detection on] will appear on the
screen.
Point the camera at a person.
zEach time the camera detects a smile it will
shoot after the lamp lights.
zPress the p button to pause smile
detection. Press the button again to p
resume smile detection.
Detecting a Face and Shooting
(Smart Shutter)
What if a smile is not detected?
Smiles are easier to detect if the subject faces the camera, and opens their mouth
enough to show some teeth when smiling.
Changing the number of shots
After choosing in Step 1, press the buttons.op
•You should switch to another mode when you finish shooting, or the
camera will continue taking shots each time the camera detects a smile.
•You can also shoot by pressing the shutter button.
Detecting a Face and Shooting (Smart Shutter)
78
Using the Wink Self-Timer
Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
Choose .
zFollow Steps 1 – 2 on p. 68 to choose ,
then press the l button.
zPress the qr buttons to choose , then
press the l button.
Compose the shot and press the
shutter button halfway.
zConfirm that a green frame appears
around the face of the person who will
wink.
Press the shutter button fully.
XThe camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
XThe lamp will blink and the self-timer
sound will play.
Face the camera and wink.
XThe shutter will release approximately 2
seconds after a wink is detected from the
person inside the frame.
zTo cancel the countdown, press the p
button.
Detecting a Face and Shooting (Smart Shutter)
79
What if a wink is not detected?
•Wink a bit slowly.
•A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Changing the number of shots
After choosing in Step 1, press the op buttons.
•Shutting both eyes will also be detected as a wink.
•If a wink is not detected, the shutter will release approximately 15
seconds later.
•If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Shooting Long Exposures
81
You can set the shutter speed to a range between 1 and 15 seconds to shoot
long exposures. However, you should attach the camera to a tripod to prevent
the camera from moving and blurring the image.
Choose ≈.
zFollow Steps 1 – 2 on p. 68 to choose ≈.
Choose the shutter speed.
zPress the o button.
zPress the qr buttons to choose the
shutter speed, then press the m button.
Confirm the exposure.
zWhen you press the shutter button
halfway, the exposure for the chosen
shutter speed will appear on the screen.
Even if your face is not detected after joining the subjects, the shutter will
release approximately 15 seconds later.
Shooting Long Exposures
•The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
•When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
•You should set the [IS Mode] to [Off] when shooting with a tripod (p. 160).
•The indicator blinks green while the camera prepares to shoot.
•If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
82
83
Choosing Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shooting skills.
•This chapter assumes that you have set the mode dial to G mode.
•G stands for Program AE.
•Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those modes
(pp. 176 191) – .
5
85
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Enter Exposure Compensation
mode.
zPress the o button.
Adjust the brightness.
zWhile watching the screen, press the qr
buttons to adjust the brightness, then
press the m button.
XThe exposure compensation amount will
appear on the screen.
You can make the flash fire every time you shoot. The effective flash range is
approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle (j),
and approximately 50 cm – 2.0 m (1.6 – 6.6 ft.) at maximum telephoto (i).
Choose h.
zAfter pressing the r button, press the qr
buttons to choose , then press the h m
button.
XOnce set, h will appear on the screen.
Adjusting the Brightness
(Exposure Compensation)
Turning the Flash On
86
The white balance (WB) function sets the optimal white balance for natural
looking colors to match the shooting conditions.
Choose the white balance function.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe setting will appear on the screen.
Custom White Balance
You can adjust the white balance to match the light source at the shooting
location. Make sure that you set the white balance under the light source of
the actual scene you will shoot.
zIn Step 2 above, choose .
zMake sure the entire screen is filled with a
plain, white colored subject, then press the
l button.
XThe tint on the screen will change when
white balance data is set.
Adjusting the White Balance
Auto Automatically sets the optimal white balance for the shooting
conditions.
Day Light For shooting outdoors, in fine weather conditions.
Cloudy For shooting in cloudy, shady or twilight conditions.
Tungsten For shooting under tungsten and bulb-type (3-wavelength)
fluorescent lighting.
Fluorescent For shooting under warm-white fluorescent, cool-white fluorescent
and warm-white-type (3-wavelength) fluorescent lighting.
Fluorescent H For shooting under daylight fluorescent and daylight-type (3-
wavelength) fluorescent lighting.
Custom For manually setting a custom white balance.
If you change camera settings after recording white balance data, the tone
may not turn out properly.
87
Choose the ISO speed.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe setting will appear on the screen.
Changing the ISO Speed
Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.
Low
High
For shooting outdoors, in fine weather conditions.
For shooting in cloudy, or twilight conditions.
For shooting nightscapes, or in dark interiors.
Changing the ISO speed
•Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
•Raising the ISO speed results in a faster shutter speed, reducing image blurring
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
When the camera is set to , you can press the shutter button halfway to
display the automatically set ISO speed.
89
You can shoot continuously at a maximum speed of approximately 0.8
images/second , and 0.9 images/second while
the shutter button is pressed fully and held.
Choose a Drive mode.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose W, then
press the m button.
zOnce set, W will appear on the screen.
Shoot.
XAs long as you hold the shutter button
down, the camera will shoot successive
images.
Continuous Shooting
•Cannot be used with the self-timer (pp. 60, 61 62), .
•In (p. 68) and (p. 69) modes, continuous shooting speed
increases.
•For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
•Depending on the shooting conditions and the camera settings, the
camera may stop shooting momentarily, or the shooting speed may slow
down.
•As the number of images increases, the shooting speed may slow down.
•If the flash fires, the shooting speed may slow down.
90
You can change the tone of an image, for example to sepia or black and
white, when shooting.
Choose My Colors.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe setting will appear on the screen.
Custom Color
The contrast, sharpness, and color saturation in an image can be chosen and
set at 5 different levels.
zFollow Step 2 above to choose , then
press the l button.
zPress the op buttons to choose an
option, then press the qr buttons to
choose a value.
zThe more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
zPress the l button to complete the
setting.
Changing the Tone of an Image (My Colors)
My Colors Off —
Vivid Emphasizes the contrast and color saturation for a vivid impression.
Neutral Tones down the contrast and color saturation for neutral hues.
Sepia Changes the image to sepia tones.
B/W Changes the image to black and white.
Custom Color You can adjust contrast, sharpness, and color saturation etc. to your
preference.
The white balance cannot be set in and (p. 86).
92
You can change the AF (Auto Focus) frame mode to match the scene you
want to shoot.
Choose [AF Frame].
zPress the n button to choose [AF
Frame] from the 4 tab, then press the qr
buttons to choose an option.
Face AiAF
•Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance ( only).
•When the camera is pointed at subjects, a white frame appears on the face
the camera judges to be the main subject, and gray frames (max. 2) will
appear on other faces.
•A frame will follow a moving subject within a certain range.
•When the shutter button is pressed halfway, up to 9 green frames will
appear on faces that the camera focuses on.
Changing the AF Frame Mode
•If a face is not detected, or only gray frames (no white frame) appear, up
to 9 green frames will appear on the areas the camera focuses on when
the shutter button is pressed halfway.
•If a face is not detected when Servo AF (p. 97) is set to [On], the AF frame
will appear in the center of the screen when you press the shutter button
halfway.
•Examples of faces that cannot be detected:
-Subjects that are far away or extremely close
-Subjects that are dark or light
-Faces turned to the side or at an angle, or faces with a portion hidden
•The camera may mistakenly identify non-human subjects as a face.
•If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
Changing the AF Frame Mode
93
Tracking AF
You can choose the subject you want to focus on and shoot (p. 94).
Center
The AF frame is locked to the center. This is effective for focusing on a
specific point.
Changing the Composition with the Focus Lock
While you keep the shutter button pressed halfway, the focus and exposure
are locked. You can now recompose and shoot. This is called Focus Lock.
Focus.
zCenter the subject you want in focus, and
press the shutter button halfway.
zConfirm that the AF frame on the subject is
green.
Recompose.
zKeep the shutter button pressed halfway
and move the camera to recompose the
scene.
Shoot.
zPress the shutter button fully.
You can reduce the AF frame size
•Press the n button to choose [AF Frame Size] from the 4 tab, then
choose [Small].
•The AF frame is set to [Normal] when using the digital zoom (p. 57) or digital
tele-converter (p. 58).
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow and will appear.
94
You can choose the subject you want to focus on and shoot.
Choose [Tracking AF].
zPress the n button to choose [AF
Frame] from the 4 tab, then press the qr
buttons to choose [Tracking AF].
X will appear in the center of the screen.
Choose the subject to focus on.
zPoint the camera so that is on the
subject you want to focus on and press the
q button.
XThe camera will beep and will appear
when a subject is detected. The camera
will continue to track the subject within a
certain range even if the subject moves.
XIf the camera does not detect the subject,
will appear on the screen.
zTo cancel tracking, press the q button
again.
Shoot.
zPress the shutter button halfway. will
change into a blue which will follow the
subject while the camera continues to
adjust the focus and exposure (Servo AF)
(p. 97).
zPress the shutter button fully to shoot.
XEven after shooting completes, will
appear, and the camera will continue to
track the subject.
Choosing the Subject to Focus On
(Tracking AF)
Magnifying the Focal Point
95
If you press the shutter button halfway, the AF frame will magnify and you can
check the focus.
Choose [AF-Point Zoom].
zPress the n button to choose [AF-
Point Zoom] from the 4 tab, then press
the qr buttons to choose [On].
Check the focus.
zPress the shutter button halfway.
XIn [Face AiAF] (p. 92), the face detected as
the main subject will appear magnified.
XIn [Center] (p. 93), the contents of the
center AF frame will appear magnified.
•The camera will detect a subject even if you press the shutter button half
way without pressing the q button. When shooting completes, will
appear in the center of the screen.
•Servo AF (p. 97) is fixed to [On].
•The camera may not be able to track the subject if the subject is too small,
moves too quickly or if the contrast between the subject and the
background is too low.
•Not available in e u or .
Magnifying the Focal Point
What if the display does not magnify?
The display will not appear magnified in [Face AiAF] if a face cannot be detected
or is too big in relation to the screen. In [Center], it will not appear magnified if the
camera cannot focus.
The magnified display will not appear when using the digital zoom (p. 57),
digital tele-converter (p. 58), Tracking AF (p. 93) (p. 97), Servo AF or when
using a TV as a display (p. 103).
98
You can choose a specific person’s face to focus on and then shoot.
Enter Face Select mode.
zPoint the camera toward the face of the
subject and press the 0 button.
XAfter [Face Select : On] appears, a face
frame will appear around the face
detected as the main subject.
zEven if the subject moves, the face frame
will follow the subject within a certain
range.
zIf a face is not detected, will not
appear.
Choose the face to focus on.
zIf you press the 0 button, the face frame
will move to another face detected by
the camera.
zWhen the frame has made a full circuit of
all detected faces, [Face Select : Off] will
appear, and the AF frame mode screen will
reappear.
Shoot.
zPress the shutter button halfway. When
the camera focuses, will change into
.
zPress the shutter button fully to shoot.
Choosing the Person to Focus On
(Face Select)
99
You can change the metering method (brightness measuring function) to
match the shooting conditions.
Choose the metering method.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe setting will appear on the screen.
Changing the Metering Method
Evaluative
For standard shooting conditions, including back lit shots.
Automatically adjusts the exposure to match the shooting
conditions.
Center
Weighted Avg.
Averages the light metered from the entire frame, but gives greater
weight to the center.
Spot Only meters within the (Spot AE Point frame) that appears at
the center of the screen.
101
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Choose ….
zAfter pressing the r button, press the qr
buttons to choose …, then press the m
button.
XOnce set, … will appear on the screen.
Shoot.
zEven if the flash fires, ensure that the main
subject does not move until the shutter
sound ends.
Shooting with Slow Synchro
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. Additionally, you should set the [IS Mode] to [Off] when
shooting with a tripod (p. 160).
A3300 IS A3200 IS
102
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
zPress the n button to choose [Flash
Settings] from the 4 tab, then press the
m button.
Choose the setting.
zPress the op buttons to choose [Red-
Eye Corr.], then press the qr buttons to
choose [On].
XOnce set, Πwill appear on the screen.
Red-Eye Correction
Red-eye correction may be applied to areas other than red eyes. For
example, when red make-up has been used around eyes.
•You can also correct recorded images (p. 134).
•You can also display the screen in Step 2 by pressing the r button, then
the n button.
103
When the camera detects the possibility that people have their eyes shut,
appears on the screen.
Choose [Blink Detection].
zPress the n button to choose [Blink
Detection] from the 4 tab, then press the
qr buttons to choose [On].
Shoot.
XWhen a person with shut eyes is detected,
a frame and appear on the screen.
You can use a TV to display the camera screen content while shooting.
•To connect the camera to a TV, follow the Steps in “Viewing Images on a
TV” (p. 120).
•Shooting procedures are the same as when using the camera screen.
Checking for Shut Eyes
•This function is only available for the last image shot when you have set
the camera to 2 or more shots in or $ mode.
•Not available in W mode.
Shooting Using a TV as the Display
104
106
You can choose among 2 different Movie modes.
Choose a Movie mode.
zAfter pressing the m button, press the
op buttons to choose E.
zPress the qr buttons to choose a Movie
mode, then press the m button.
You can shoot movies that look like moving miniature models. You create the
miniature model effect by choosing the upper and lower portions of the scene
that will be blurred, and the playback speed, which makes people and objects
in the scene move quickly during playback. Audio will not be recorded.
Choose .
zFollow the steps above to choose .
XA white frame (the area that will not be
blurred) appears on the screen.
Choose the area to keep in focus.
zPress the l button.
zMove the zoom lever to change the frame
size, and press the op buttons to change
the frame position.
Changing the Movie Mode
E Standard For shooting standard movies.
Miniature Effect You can shoot movies that look like a miniature model (p. 106).
Shoot Movies That Look Like a Miniature
Model (Miniature Effect)
108
You can choose among 3 different image quality settings.
Choose the image quality setting.
zAfter pressing the m button, press the
op buttons to choose .
Choose an option.
zPress the qr buttons to choose an option,
then press the m button.
XThe option you set will appear on the
screen.
Image Quality and Shooting Time per Memory Card
• Based on Canon’s testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in , and
approximately 1 hour when shooting in or .
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Changing the Image Quality
Image
Quality
Recording Pixels,
Frame Rate Content Memory Card Capacity
4 GB 16 GB
1280 x 720 pixels,
30 frames/sec.
For shooting
high-definition movies.
Approx.
22 min. 5 sec.
Approx.
1 hr.
30 min. 30 sec.
640 x 480 pixels,
30 frames/sec.
The image quality will
be higher when
compared with , but
the recording time will
be shorter.
Approx.
50 min. 17 sec.
Approx.
3 hr.
25 min. 54 sec.
320 x 240 pixels,
30 frames/sec.
Since the file size is
small, shooting time
will increase, but the
image quality will
decrease.
Approx.
3 hr.
2 min. 52 sec.
Approx.
12 hr.
28 min. 47 sec.
109
You can lock the exposure or change it in 1/3 steps within a range of ±2
before shooting.
Focus.
zPress the shutter button halfway to focus.
Lock the exposure.
zAfter releasing the shutter button, press
the o button to lock the exposure. The
exposure shift bar appears.
zPress the button again to release the o
lock.
Change the exposure.
zWhile watching the screen, press the qr
buttons to adjust the exposure.
Shoot.
AE Lock/Exposure Shift
122
You can protect important images so that they cannot be accidentally erased
with the camera (pp. 28, 125).
Choose a selection method
Choose [Protect].
zPress the n button to choose
[Protect] from the 1 tab, then press the
m button.
Choose a selection method.
zPress the op buttons to choose a
selection method, then press the m
button.
zPress the n button to complete the
setting and restore the menu screen.
Choosing Images Individually
Choose [Select].
zFollow Step 2 above to choose [Select],
then press the m button.
Choose images.
zPress the qr buttons to choose an image,
then press the m button.
X will appear on the screen.
zPress the m button again to deselect the
image. will disappear.
zTo choose additional images, repeat the
above procedure.
Protecting Images
If you format the memory card (pp. 22, 151), protected images will also be
erased.
Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection settings first.
Product specificaties
| Merk: | Canon |
| Categorie: | Digitale camera |
| Model: | PowerShot A2200 |
| Kleur van het product: | Rood |
| Gewicht: | 135 g |
| Breedte: | 93.2 mm |
| Diepte: | 23.6 mm |
| Hoogte: | 57.2 mm |
| Beeldscherm: | LCD |
| Beeldschermdiagonaal: | 2.7 " |
| Touchscreen: | Nee |
| Ondersteunde videoformaten: | MOV |
| Video recording: | Ja |
| Compatibele geheugenkaarten: | MMC, SD, SDHC, SDXC |
| Focus: | TTL |
| Brandpuntbereik: | 5 - 20 mm |
| USB-versie: | 2.0 |
| Beeldstabilisator: | Nee |
| Megapixels: | 14.1 MP |
| Maximale beeldresolutie: | 4320 x 3240 Pixels |
| Type beeldsensor: | CCD |
| Beeldsensorformaat: | 1/2.3 " |
| Cameratype: | Compactcamera |
| Digitale zoom: | 4 x |
| Optische zoom: | 4 x |
| Lensstructuur (elementen/groepen): | 6/5 |
| Gecombineerde zoom: | 16 x |
| Digitale SLR: | Nee |
| 35 mm cameralens equivalent: | 28 - 112 mm |
| Camera sluitertijd: | 1 - 1/1600 s |
| Ingebouwde flitser: | Ja |
| Videomogelijkheid: | Ja |
| Interface: | USB 2.0, A/V-out |
| Auto focusing (AF) modes: | Continuous Auto Focus, Selective Auto Focus, Single Auto Focus |
| ISO-gevoeligheid: | 80,100,200,400,800,1600,Auto |
| Lichtmeting: | Centre-weighted, Spot |
| Flits-bereik (wijd): | 0.3 - 4 m |
| Flits-bereik (tele): | 0.5 - 2 m |
| Flitser-modi: | Auto, Flash off, Manual, Red-eye reduction, Slow synchronization |
| Maximale videoresolutie: | 1280 x 720 Pixels |
| Framerate Motion JPEG: | 30 fps |
| HD type: | HD |
| Beeldschermresolutie (numeriek): | 230000 Pixels |
| Intern geheugen: | - MB |
| Witbalans: | Auto, Cloudy, Custom modes, Daylight, Fluorescent, Tungsten |
| Levensduur accu/batterij: | 6 uur |
| Filter: | Ja |
| Meegeleverde software: | ZoomBrowser EX / ImageBrowser\nPhotoStitch |
| Aansluitingen: | 1x USB Mini-B\n1x A/V-out (PAL/NTSC) |
| Scene modes: | Beach, Candlelight, Children, Fireworks, Portrait, Self-portrait, Snow, Landscape (scenery) |
| Foto-effecten: | Black&White, Neutral, Sepia, Vivid |
| Compatibele besturingssystemen: | Windows 7/ Vista SP1-2/ XP SP3\nMac OS X v10.5 – 10.6 |
| Mac-compatibiliteit: | Ja |
| Auto Focus (AF) assisteer straal: | Ja |
| Scherpstellen: | Auto |
| PictBridge: | Ja |
| Beeldbewerking: | Hermeting |
| Camera afspelen: | movie, single image |
| Dichtstbijzijnde focus afstand: | 0.03 m |
| Batterij leeftijd (CIPA standaard): | 280 opnames |
| Datacompressie: | Fine, Norm |
| Bedrijfstemperatuur (T-T): | 0 - 40 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 10 - 90 procent |
| Batterijtechnologie: | Lithium-Ion (Li-Ion) |
| Type batterij: | NB-8L |
| Face tracking: | Ja |
| Afspeel zoom: | 2 x |
| Auto Focus (AF) slot: | Ja |
| Aantal aspheric elementen: | 2 |
| Histogram: | Ja |
| Field of view: | 100 procent |
| Flitsopnameslot: | Ja |
| Custom kleur: | Ja |
| Afbeeldingsprocessor: | DIGIC 4 iSAPS |
Heb je hulp nodig?
Als je hulp nodig hebt met Canon PowerShot A2200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Digitale camera Canon
16 Augustus 2022
10 Mei 2022
10 Mei 2022
18 Mei 2022
9 Mei 2022
11 Februari 2022
1 Mei 2022
8 Februari 2022
8 Mei 2022
16 Augustus 2022
Handleiding Digitale camera
- Digitale camera Braun
- Digitale camera Bosch
- Digitale camera HP
- Digitale camera Sony
- Digitale camera Samsung
- Digitale camera Xiaomi
- Digitale camera Casio
- Digitale camera Panasonic
- Digitale camera Nikon
- Digitale camera Epson
- Digitale camera JVC
- Digitale camera Motorola
- Digitale camera Medion
- Digitale camera Olympus
- Digitale camera Quintezz
- Digitale camera Toshiba
- Digitale camera VTech
- Digitale camera A-Rival
- Digitale camera AEE
- Digitale camera Agfa
- Digitale camera Agfaphoto
- Digitale camera Aiptek
- Digitale camera Albrecht
- Digitale camera Apeman
- Digitale camera Argus
- Digitale camera Beha-Amprobe
- Digitale camera BenQ
- Digitale camera BlackVue
- Digitale camera BML
- Digitale camera Bolyguard
- Digitale camera Brinno
- Digitale camera Bushnell
- Digitale camera Denver
- Digitale camera Digital Blue
- Digitale camera Dnt
- Digitale camera Drift
- Digitale camera Easypix
- Digitale camera Ematic
- Digitale camera Envivo
- Digitale camera Fisher Price
- Digitale camera Flir
- Digitale camera Fuji
- Digitale camera Fujifilm
- Digitale camera GE
- Digitale camera Gembird
- Digitale camera General Electric
- Digitale camera Genius
- Digitale camera Geonaute
- Digitale camera Goclever
- Digitale camera GoPro
- Digitale camera Guardo
- Digitale camera HTC
- Digitale camera Ingo
- Digitale camera Insta360
- Digitale camera Ion
- Digitale camera Kodak
- Digitale camera Kompernass - Lidl
- Digitale camera Konica
- Digitale camera Konig Electronic
- Digitale camera Kyocera
- Digitale camera Lamax
- Digitale camera Leica
- Digitale camera Lexibook
- Digitale camera Liquid Image
- Digitale camera Maginon
- Digitale camera Magpix
- Digitale camera Minolta
- Digitale camera Minox
- Digitale camera Mustek
- Digitale camera Nytech
- Digitale camera Pentax
- Digitale camera Plawa
- Digitale camera Polaroid
- Digitale camera Powerfix
- Digitale camera Praktica
- Digitale camera Pulsar
- Digitale camera Qware
- Digitale camera RadioShack
- Digitale camera Red
- Digitale camera Renkforce
- Digitale camera Revue
- Digitale camera Ricoh
- Digitale camera Rollei
- Digitale camera Sakar
- Digitale camera SeaLife
- Digitale camera Sigma
- Digitale camera Silvercrest
- Digitale camera Sipix
- Digitale camera Somikon
- Digitale camera Spypoint
- Digitale camera Storex
- Digitale camera Targa
- Digitale camera Technaxx
- Digitale camera Tevion
- Digitale camera TomTom
- Digitale camera Traveler
- Digitale camera Trust
- Digitale camera Umax
- Digitale camera Veho
- Digitale camera Vivitar
- Digitale camera Voigtlaender
- Digitale camera Wanscam
- Digitale camera WASPcam
- Digitale camera Yakumo
- Digitale camera Jobo
- Digitale camera Odys
- Digitale camera Oregon Scientific
- Digitale camera Duramaxx
- Digitale camera Guide
Nieuwste handleidingen voor Digitale camera
22 Oktober 2024
1 September 2024
14 Februari 2024
4 Februari 2024
25 December 2023
25 December 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023