BT Video Baby Monitor 6000 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor BT Video Baby Monitor 6000 (2 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
How to recycle your equipment
The symbol shown here and on the
product means that the product is
classed as electrical or electronic
equipment, so DO NOT put it in
your normal rubbish bin.
It’s all part of the Waste Electrical and
Electronic Equipment (WEEE) Directive to
recycle products in the best way – to be
kinder to the planet, get rid of dangerous
things more safely and bury less rubbish
in the ground.
You should contact your retailer or
supplier for advice on how to dispose
of this product in an environmentally
friendly way.
Radio Equipment Directive
Declaration of Conformity
Hereby, British Telecommunications plc
declares that the radio equipment type BT
Video Baby Monitor 6000 (088306) is in
compliance with Directive 2014/53/EU.
This device has been evaluated for
and shown compliant with European
Guidelines when installed and operated
with a minimum distance of 16mm
between the unit and your body.
The item code for both power supply units
is .089010 (BLJ06W050100P1-B)
The full text of the EU declaration of
conformity is available at the following
internet address: bt.com/producthelp
Radio transmission information
Frequency range 2415.375 –
2471.625MHz
Max power 81.28mW (19.1dBm)
General information
Welcome
Thanks for buying a BT Baby Monitor. You’ll soon
be able to relax knowing you can watch and listen
for your baby’s every breath, gurgle and wriggle.
But rst things rst. To get set up, just follow the steps
opposite. If you need any help, go to bt.com/producthelp
or give us a call on 0808 100 6554*.
Getting set up
© British Telecommunications plc 2017.
Registered Oce: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000
Designed and produced by The Art & Design Partnership (ADP). Printed in China / Issue 4 / ADP12-17
Important safety notices
1. Your baby monitor is designed as just an aid.
It isn’t a substitute for responsible and proper
adult supervision.
2. Make sure all cables and units are out of your baby’s
reach – at least one metre away.
3. Never cover either unit, put them in moist places or
inside the cot, bed or playpen.
4. If you travel abroad, check the voltage on your unit’s
plugs match the local power output.
5. Do not take the product apart. You can’t change
the battery installed in the Parent unit. If you need
repairs, get in touch with our helpdesk.
1 Plug the cable into the Parent unit, then plug it into the
mains power socket and switch the socket on.
2 Leave to charge for .12 hours
Tip
The rst time you use the Parent unit, or if you haven’t
used it for a long time, it’ll take 12 hours to fully charge.
The battery life on a single charge lasts for 4 hours.
We recommend you keep the cable plugged into the
mains power socket if you’re going to use for longer than
this or throughout the night.
When the battery gets very low, it’ll take about 30
minutes to charge enough for you to use it for a
short time. To charge the Parent unit in the shortest
amount of time, turn it o while it’s charging.
3 Place the Baby unit near a power socket in the room
where you’re going to be monitoring your baby most of
the time. It should also be at least one metre away from
your baby.
4 Plug the cable into the Baby unit, then plug it into the
mains power socket and switch the socket on.
5 Slide the
On
Off
button on the side of the Baby unit
up to turn it on.
Tip
Keep the power cord out of baby’s reach by looping any
extra length and securing it.
Link
Troubleshooting
My Parent/Baby unit isn’t working. What should I do?
Check that:
1 power cables are plugged in and switched on at the
wallsocket
2 the Baby unit is plugged in and the Parent unit battery
is fully charged (for 12 hours)
3 both units are turned on
4 the Parent unit isn’t too far from the Baby unit (large
obstructions or other electrical devices might aect the
signal between the Parent and Baby unit).
5 unplugging the power cables, waiting about 15 seconds,
and then plugging them back in can help.
My Parent/Baby unit is making a high-pitched noise.
Whatshould I do?
The units might be too close together. Make sure they’re
at least one metre apart, even when you’re using the
button.
Why is my Parent unit beeping?
The Parent unit beeps when:
• the Baby unit is turned o
• the units are too far apart – try moving them closer
together (but not closer than one metre)
• the battery in the Parent unit isn’t charged – try charging
it for 12 hours
• Other electronic items, like TVs and mobile phones, are
causing interference – try moving the Baby unit away
from things like that.
Why is the Parent unit not making any sounds even
though there’s noise coming from my baby’s room?
• the Parent unit might not be fully charged – make sure
it’s charged (for 12 hours).
• the speaker volume might be switched o.
• the Parent unit might be out of range of the Baby unit –
try moving it closer (but not closer than one metre).
• large obstructions or other electrical devices might
be aecting the signal between the Parent and Baby
units). Try moving the Baby unit away from obstructions,
including electrical appliances like TVs or mobile phones.
6 After the Parent unit has charged for 12 hours you can
switch it on.
Before you do, move the Parent unit at least one metre
from the Baby unit. Any closer and you might get audio
feedback sounds.
Press the button and hold for 2 seconds to turn the
Parent unit on.
The Parent and Baby unit are automatically linked so
they are now ready to use.
What’s the range?
The maximum range between your Parent and Baby
units is about 250 metres outdoors and about 50 metres
indoors. Thick walls and doors reduce the units’ range
and aect how they link to each other.
Guarantee
Your Video Baby Monitor 6000 is
guaranteed for a period of 24 months
from the date of purchase.
Subject to the terms listed below, the
guarantee will provide for the repair of,
or at BT’s or its agent’s discretion the
option to replace the Video Baby Monitor
6000, or any component thereof, which
is identied as faulty or below standard,
or as a result of inferior workmanship or
materials. Products over 28 days old from
the date of purchase may be replaced
with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to
defects that occur within the 24 month
guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its
agent as instructed.
This guarantee does not cover any faults
or defects caused by accidents, misuse,
fair wear and tear, neglect, tampering
with the equipment, or any attempt at
adjustment or repair other than through
approved agents.
This guarantee does not aect your
statutory rights.
To nd out what to do, if your monitor is
in or outside of the 24 month guarantee,
go to bt.com/producthelp
Mic
Menu
OK
Talk
Need some help?
Frequently asked questions are available online.
bt.com/producthelp
If you cannot nd the answer to your question online,
call our free Helpline. Our dedicated advisors are more
likely to be able to help you than the retailer where you
bought your baby monitor.
0808 100 6554*
This user guide is also available in other formats: large
print, Braille and audio CD. Call the helpline for a copy.
* Calls made from within the UK mainland network are free.
Mobile and international call costs may vary.
Video Baby Monitor 6000
User Guide
Power socket Camera
Link
OnOff
Mic
Menu
OK
Talk
Set a reminder
You can set an alert to remind you of something you need to do, for
example when your baby’s next feed is due. You can set it for 2, 4 or
6 hours.
1. Press
Menu
, then press to display .
2. Press or to select the reminder time ( , or ), 2H 4H 6H
then press OK to save. The will be displayed on the top right
of the screen.
3. To cancel the alert, select .
Set the screen to turn on and o automatically
You can set the screen to turn on by pressing any button. On this
setting, the screen will turn o automatically when no button is
pressed during 1, 3 or 5 minutes.
1. Press
Menu
, then press to display .
2. Press and to select , or minutes and press 1 3 5
OK
.
3. To turn the screen back on at any time, press any button. If you want
to set the screen on all the time, set the screen setting . to o
Turn sound activated screen mode on or o
When set to On, the screen will turn on if noise is detected from the
Baby unit. If it’s set to O, the screen will stay o even if noise is
detected. To use this feature, you need to set the standby mode rst
to 1, 3 or 5 minutes as described above.
1. Press
Menu
, then press to display .
2. Press or to select (for On) or (for O) and press OK .
3. To turn the screen back on at any time, press the .
Temperature sensor
The reading from the temperature sensor will be displayed at the top
of the Parent unit screen.
To change the temperature display from C to F:
1. Press , then press to display and press .
2. Press or to select or , then press .°C °F
Other screen icon descriptions
Temperature
sensor
Get to know your Baby unit
Get to know your Parent unit
Sound level
display
LED lights
show the level
of sound being
detected from
the Baby unit.
Press and hold to turn
the unit on and o.
Press once to switch
to standby mode.
Press to
open/exit the
main menu.
Press and hold to
talk to your baby.
Speaker
Microphone
Press to move
left or right in the
menu or to increase
or decrease the
brightness level.
Press to scroll up
or down when
you’re in the menu.
Press to increase
or decrease the
speaker volume.
Power socket
Press to select an
option in the menu.
Press to enter pan and
tilt mode, then use
the arrows to move
the camera.
Using the Parent unit
Turn on and o
Press and hold for 2 seconds to turn on and o.
Using the menu
• Press
Menu
to open the main menu. Scroll through the menu options
across the bottom of the screen using
and . When the menu option you want is highlighted, use
or to scroll through the sub menus and press OK to select.
• Press
Menu
to exit the menu and return to the main monitoring screen.
Monitoring volume and mute
There are 8 volume settings. The default is 4.
1. In monitor mode, press or to change the volume.
2. Press OK to conrm.
3. To turn the sound o completely, turn the volume down
to 0. will be displayed on top of the screen.
Screen brightness
There are 8 brightness levels. The default is 4.
1. In monitor mode, press or to select the brightness level.
2. Press
OK
to conrm.
Lullabies
There are 5 lullabies to choose from or you can play all 5 in sequence.
1. Press
Menu
, is displayed.
2. Press or to choose the lullaby 1-5 or press to play all ve,
then press OK .
3. Press or to select the volume from 1-3 and press
OK
to save.
4. To stop the lullaby playing, select .
Talk to your baby
To give your baby some words of comfort, press and hold down Talk
on the Parent unit and speak into the Parent unit’s microphone.
The icon will be displayed at the bottom right corner. Release the
button when you’ve nished speaking.
Pan/tilt and Zoom in/out
• To enter/exit the pan/tilt mode, press OK . When in Pan/tilt mode,
press , , , to move the image.
• To enter zoom mode, press
Menu
, then press to display ,
then press or to select the zoom level and press OK to
exit menu. Charging/
battery light
Blue when mains
power adapter
is on, red when
battery low.
Power on light
Green when Parent
unit turned on.
(Remains green for one
minute while charging,
after the Parent unit
is turned o).
Stand
Power on/o
Slide button up
to turn on and down
to turn o.
Link button
The units are pre-linked.
(Link button used if re-link ever required).
Add camera Delete camera View camera
Using the Baby unit
Turn on and o
1. Slide the
On
Off
button on the side of the Baby unit up to turn
on and down to turn o.
Night vision
So that you can see your baby at night, the Baby unit automatically
uses the light from its infrared LED lights to capture images in a dark
room. Because of that, it can only show images in black and white.
The icon will be displayed at the top of the screen.
Signal strength
Baby unit switched on
1
Camera identication
number e.g. Camera 1
Sound on
Mute
Battery status (Full battery shown,
scrolling when charging)
On
Off
Product specificaties
| Merk: | BT |
| Categorie: | Babyfoon |
| Model: | Video Baby Monitor 6000 |
Heb je hulp nodig?
Als je hulp nodig hebt met BT Video Baby Monitor 6000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Babyfoon BT
14 November 2023
14 November 2023
14 November 2023
13 November 2023
13 November 2023
13 November 2023
13 November 2023
5 Juni 2023
Handleiding Babyfoon
- Babyfoon Philips
- Babyfoon IKEA
- Babyfoon Brondi
- Babyfoon Fysic
- Babyfoon Grundig
- Babyfoon Gigaset
- Babyfoon Motorola
- Babyfoon Medion
- Babyfoon Tefal
- Babyfoon Topcom
- Babyfoon VTech
- Babyfoon Albrecht
- Babyfoon Alcatel
- Babyfoon Alecto
- Babyfoon Amplicomms
- Babyfoon Angelcare
- Babyfoon Ansmann
- Babyfoon Ariete
- Babyfoon Audioline
- Babyfoon Babyfon
- Babyfoon Babymoov
- Babyfoon BabySafe
- Babyfoon Basetech
- Babyfoon Beaba
- Babyfoon Bebetel
- Babyfoon Beurer
- Babyfoon Binatone
- Babyfoon D-Link
- Babyfoon Denver
- Babyfoon Duronic
- Babyfoon Duux
- Babyfoon Elro
- Babyfoon Esscom
- Babyfoon Eufy
- Babyfoon Ezviz
- Babyfoon Fischer Price
- Babyfoon Fisher Price
- Babyfoon Foscam
- Babyfoon Geemarc
- Babyfoon Goclever
- Babyfoon Graco
- Babyfoon Grixx
- Babyfoon Hama
- Babyfoon Hartig Helling
- Babyfoon HQ
- Babyfoon Hyundai
- Babyfoon Kodak
- Babyfoon Kogan
- Babyfoon Konig
- Babyfoon Lanaform
- Babyfoon Lorex
- Babyfoon Lupilu
- Babyfoon Luvion
- Babyfoon Manhattan
- Babyfoon ME
- Babyfoon Medisana
- Babyfoon MicroTalk
- Babyfoon Modern-Electronics
- Babyfoon Nedis
- Babyfoon Nova
- Babyfoon Pabobo
- Babyfoon Philips-Avent
- Babyfoon Reer
- Babyfoon Safety 1st
- Babyfoon Sanitas
- Babyfoon Silvercrest
- Babyfoon Stabo
- Babyfoon Swissvoice
- Babyfoon Switel
- Babyfoon Technaxx
- Babyfoon Terraillon
- Babyfoon Tesla
- Babyfoon Tommee Tippee
- Babyfoon Tomy
- Babyfoon Trebs
- Babyfoon Trendnet
- Babyfoon Tristar
- Babyfoon Truelife
- Babyfoon Uniden
- Babyfoon Withings
- Babyfoon Jablotron
- Babyfoon Jane
- Babyfoon Olympia
- Babyfoon Oregon Scientific
- Babyfoon Oretti
- Babyfoon Overmax
- Babyfoon Concept
- Babyfoon Niceboy
- Babyfoon Lionelo
- Babyfoon Cobra
- Babyfoon EMOS
- Babyfoon Chicco
- Babyfoon Cresta
- Babyfoon SereneLife
- Babyfoon M-e
- Babyfoon Hartig And Helling
- Babyfoon NUK
- Babyfoon Oricom
- Babyfoon Summer
- Babyfoon Tigex
- Babyfoon Lindam
- Babyfoon BabyOno
- Babyfoon Neno
- Babyfoon Xblitz
- Babyfoon IBaby
- Babyfoon Levana
- Babyfoon Mobi
- Babyfoon Neonate
- Babyfoon Chipolino
- Babyfoon Babysense
- Babyfoon Heimvision
- Babyfoon Summer Infant
- Babyfoon LeamsiQ
- Babyfoon Chillax Baby
- Babyfoon Hubble Connected
- Babyfoon Peekyboo
Nieuwste handleidingen voor Babyfoon
16 November 2024
16 November 2024
16 November 2024
16 November 2024
15 November 2024
15 November 2024
10 November 2024
10 November 2024
5 November 2024
28 Oktober 2024