Bretford MDMLAP32NR-CTAL Handleiding

Bretford Multimedia kar MDMLAP32NR-CTAL

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford MDMLAP32NR-CTAL (2 pagina's) in de categorie Multimedia kar. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

The “Power Manager” has two LED indicator lights that let you know what it is happening

The left light is Amber and the right one is Red

Amber

Red

1. When the power button is switched to the “On” position, both

indicator lights will light up for approximately 2 seconds.

2. Both lights will then turn off while the “Power Manager” evaluates

the power required to charge the first set of devices.

3. The Amber light will come on and stay lit indicating that the “Power

Manager” is now in “Smart Charge” mode. This means that laptops

will be charged in groups, three minutes at a time.

4. Once the power needed to charge all of the devices in the cart

reaches a level that will not trip the circuit, the “Power Manager”

enters “All Charge” mode and both lights will be off. All devices are

now charging.

1. If both the Amber and Red lights start to blink, it means one set of devices is drawing too much current and the “Power

Manager” needs to be reset by turning it off and back on. If problem persists there may be a faulty device that needs to be

removed.

2. If the Amber light displays single blinks, it means the current required to power the auxiliary outlet is too high. Unplugging

whatever is in the auxiliary outlet should allow the “Power Manager” to resume charging the devices.

3. If the Amber light displays double blinks, the internal temperature of the cart is too high. Open the doors of the cart and/or move

the cart to a cooler room. The cart should cool down without having to turn off the “Power Manager”

MDMLAP32NR

32 Laptop Computers in Vertical Slots

Maximize your Tech Investment

The MDM Network Ready Laptop Cart provides

you the infrastructure to secure, charge and

update 32 computers.

The cart ships fully assembled with:

• 33 Ethernet cables pre-wired and ready to

plug into your laptops

• Dedicated space for your 19” rack-mounted

network switch

• Two thermally-controlled fans to dissipate

heat while your computers are updating

Save time and money by sending patches,

updates and content to all of the devices in the

cart at once.

Dual-Locking Swing Handle

Flexible Security

The MDM Laptop Cart is secured with a

unique dual-locking handle built right

into the doors. The handle can be

opened by using EITHER the three digit

combination or a key.

2. Using the Combination Lock

• Dial in the factory set combination

– “000”

• Turn the wing knob 180 degrees

counter clockwise until the arrow

points straight up (3). Lift and turn

the handle to open the door.

• To re-lock, turn the wing knob 180

degrees clockwise and scramble

the combination.

• The MDM Laptop Cart features the , which is designed to continuously charge even  new and improved Power Manager

the most power hungry laptops using only one wall outlet.

• The system uses a that constantly evaluates the demand for power and allows each  “Round Robin” charging cycle

electrical strip time to cool down. , and extended battery life saves you money. Cooler batteries last longer

• When the total draw of the devices allows it, the will turn on automatically and receive continuous power  Network Switch

until the unit is powered off.

• inside the cart communicate the internal temperature to the Power Manager. When it exceeds 77°F  Two Heat Sensors

the fans will turn on and if it gets above 100°F the system will stop sending power until the cart cools down.

Power Management System … The “Power Manager 

11000 Seymour Avenue Franklin Park, IL 60131 USA 800 521 9614

www.bretford.com

1. Using the Key

• Insert the key into the lock and

turn it 180 degrees counter

clockwise (2)

• Lift and turn the handle to open

the door.

• To re-lock, turn the key 180

degrees clockwise.

3. Changing the Combination

• Put the in the locked keylock

position and dial in the existing

combination.

• Turn the wing knob 180

degrees + 15 degrees counter

clockwise (3) & (4). Enter the

desired new combination.

• Turn the wing knob 15 degrees

clockwise. The new

combination is now set.

Cut Here - Finished size = 16 W x 11 H - Folded three times, like a map  

!" #$%&'"()*+," -&."()*+," /&01)1*" 2345631"

7" 2)1*4&"84)19:" ;<" #5=)4)0'>"?'0@)1*"A33"/5B+"C3@&'" D1E45*"#5=)4)0'>"

F" ?35%4&"84)19:" ;<" G1,&'104"A&$E"3H"I0',"A33"J)*+" ;E&1"?33':K/3L&"I0',"

M" 2)1*4&"84)19:" 2)1*4&"84)19:" ;1&"2&,"?'0@)1*"A33"/5B+"C3@&'" A5'1";<"N";1"

!" #$%&'"()*+," -&."()*+," /&01)1*"

7" ;1" ;1" 2,0',ODE"

F" ;<" ;<" 2&4HOA&:,"

M" ;1" ;<" 2$0',"I+0'*&"/3.&"

P" ;<" ;<" #44"I+0'*&"/3.&"

Please Note: It is recommended that

nothing be plugged into the Auxiliary

outlet while charging

What is the “Power Manager” doing?

Basic T

Basic TBasic Troubleshooting

roubleshooting

roubleshooting roubleshooting

Part #: 031-9405 03/13/2012

MDM Network Ready

Laptop Cart

USER GUIDE

Directional Locking

Casters can be locked as a

rigid caster for easy rolling down

the hallway, or unlocked to swivel

for easily getting into tight spaces.

Security provided by dual-

locking handles built right into the

steel constructed doors

Front View

Two Fans in the front of

the cart vacate heat, keeping

the internal temperature of the

cart within recommended

operating levels.

Removable Cord

Management panels let IT

Coordinator wrap cable sets at a desk.

No more kneeling or bending behind

the cart organizing the power cords.

Ethernet Cables

pre-wired in the rear of

the cart.

Back View

MDM Network Ready

Laptop Cart

USER GUIDE

11000 Seymour Avenue Franklin Park, IL 60131 USA 800 521 9614

www.bretford.com

MDMLAP32NR

32 Laptop Computers in Vertical Slots

How Does the Network Ready Cart Manage Heat?

When computers are charging, the source of heat is the adapter/transformer.

However, when they are receiving updates from your network, the computers must

be powered on meaning the source of the heat inside the cart is the computers’

ventilating themselves to keep their internal batteries cool. The air emitted from each

computer is very hot and with all 32 laptops ventilating at once, the internal

temperature of the cart rises dramatically while they are updating.

Computer manufacturers recommend a safe temperature range of 50°F to 95 °F for

operating laptops. To keep the internal temperature of the cart within these limits,

the MDM Network Ready Laptop Cart features ventilation on the side panels and is

equipped with two thermally-controlled fans that turn on when the temperature

inside the cart exceeds 77°F. Bretford has conducted extensive testing that

confirms the effectiveness of these features.

ELECTRICAL: Avoid sparks. Avoid arcing Always turn OFF the power to the cart before plugging IN or OUT!

ELECTRICAL: For Safety Purposes, make sure all electrical components do not exceed the the maximum load rating of 12 amps.

ELECTRICAL: Risk of electrical shock. Do not plug the power cord into another extension cord or relocatable power tap.

ELECTRICAL: The power strips inside the laptop cart are only for charging laptop computers. Any other use may cause an

overload for the Power Management System, causing the Power Manager to shutdown. To reset the “Power Manager”, turn off the  

main power switch, unplug the non-laptop device, then turn the main switch back on.

CAUTION: Be sure each laptop computer is turned OFF before plugging into the cart..

CAUTION: Do Not block the ventilation holes or fans on the cart. Proper air flow is required for safe operation of equipment.

CAUTION: Cart with computers should be kept in a room with a maximum temperature not to exceed 77° F or 25° C.

CAUTION: Maximum weight of accessories on top of cabinet is 25 pounds.

CAUTION: Avoid loading equipment in the cart in a uneven fashion. Uneven weight distribution could cause a hazardous condition.

Laser-Cut ID #’s in

front & back keep computers

and their cable sets in the right

place and make it easy to

identify if something is

missing.

The system allows you to “Desktop” Cord Management

organize the computer cord sets while seated at a table. No more

bending or kneeling behind the cart!! Simply remove the four

steel panels, secure the adapters with the Velcro straps, and re-

hang them in the rear of the cart.

Cable Management … Done at your Desk!

Power Manager

Uses the power from a

single wall outlet to charge

and update laptops safely

and efficiently.

When the Power Manager has moved through all of power modes described

in the blue box on the reverse side of this guide, the power required for all six

power strips will be below 10 amps and the network switch will be powered

on. Once on, the network switch will ALWAYS receive power until the Power

Manager is manually turned off.

If the combined draw of the power strips and network switch exceeds 10

amps, the cart will revert to “Smart Charge” mode. The network switch will

continue to get power but some computers will be running on battery power

every three minutes as the Power Manager redistributes the current.

Note that if the computers are updated remotely, they must be receiving AC

power to receive a “wake up” packet. Therefore, when using Wake-On LAN

we recommend the computers be to prevent the “awakened” in stages

Power Manager from reverting to “Smart Charge” mode. For example, the

“wake-up” packet would be sent to the computers in slots 1-8; once they are

on, the packet would be sent to the computers in slots 9-16, and so on until all

32 devices are powered on.

Since computers can receive updates while operating on battery power, the

update can now be sent to all 32 of them at once. If the computers are

powered on manually, updates can be sent to the entire cart simultaneously.

Dedicated Space

for your 19” rack-mounted

network switch.

For Best Results When Using the Networking Functionality,

We Recommend that All of the Computers in the Cart be

Fully Charged

Networking with the Power Manager

Mount your switch in the back of the cart

Remove the top panel in front of the cart

Plug your switch into the Power Manager

Getting Started

The cable management

channel includes a cut-out

designed to hold the Ethernet

cable and power cord in place.

Place the power cord on top of

the Ethernet cable and loop it into

the “notch” and over the hook at

the front.

Be sure to leave enough slack at both

ends of the power cord to be able to

plug one end into the power strip and

pass the other end through the divider

panel to the front of its assigned storage

slot. Use the to Laser Cut ID Numbers

quickly match computers with their cord

sets.

The MDM Network Ready Laptop Cart ships with 32 Ethernet

cables pre-wired in the rear of the cart. One end will be routed

to the dedicated space for your network switch and the other

end will be threaded through the divider panel into the cable

management channel in the front section of the cart.

Network updates sent to computers using the MDMLAP32NR are the responsibility of your IT Department. The information above explains

how the Power Manager will potentially affect these efforts and all recommendations are based on results of Bretford’s internal tests.

Product specificaties

Merk:	Bretford
Categorie:	Multimedia kar
Model:	MDMLAP32NR-CTAL
Kleur van het product:	Wit
Gewicht:	124740 g
Breedte:	1244.6 mm
Diepte:	660.4 mm
Hoogte:	1092.2 mm
Soort:	Multimediawagentje
Afmetingen verpakking (BxDxH):	1422.4 x 812.8 x 1270 mm
Aantal schappen:	32 schappen
Materiaal:	Staal
Aanbevolen gebruik:	Laptop