Ergotron ZBCG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ergotron ZBCG (3 pagina's) in de categorie Multimedia kar. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
1 of 3
300-5417-00 rev. C • 10/16
Product Part#
Base Storage Shelf ZBSSCG
Built with Anthro-DNAâ„¢
For the latest User Installation Guide please visit: www.ergotron.com
A S S E M B LY I N S T R U C T I O N S
Zido® Base Storage Shelf
NOTE: The Zido Base Unit is not included.
2 of 3
300-5417-00 rev. C • 10/16
05
01
02
03
04
06
07
08
09
Product Quantity Part Number
01 Base Storage Shelf 1 225-2644-00
02 Rear Clamp 1 225-2645-00
03 Front Clamp X 1 225-2646-00
04 Front Clamp Y 1 225-2647-00
05 Bumpers 8 175-5132-03
06 Grommet 1 175-5327-00
07 1-1/4" Screw 5 325-5183-00
08 3/8" Screw 2 325-5232-00
09 Nylok Nut 2 325-5186-00
10 3-way Wrench (not shown) 1 225-5186-03
11 1/8" Hex Key (not shown) 1 375-5015-00
12 Strap & Buckle Kit (not shown) 1 ZSTRBK
W E L CO M E
Thank you for purchasing Zido
Base Storage Shelf.
If you have any questions or if we
can help you in any way, please
contact us at 800.325.3841.
PA R TS L I S T
Before beginning assembly of your Zido Base Stor-
age Shelf, please review the parts list to verify that
your shipment is complete.
STEP 1
Assemble the Front & Rear Clips
ï‚¡ Insert one 1-1/4" screw through the threaded opening
on each Front Clamp. Tighten just enough to see the tip
of the fastener come through the top of the threaded
opening.
ï‚¡ Insert one 1-1/4" screw through the three threaded
openings on the Rear Clamp. Tighten just enough to
see the tip of the fastener come through the top of the
threaded opening.
3 of 3
300-5417-00 rev. C • 10/16
© 2016 Ergotron, Inc. All rights reserved.
All trademarks are the property of their respective companies. Anthro is a registered trademark and brand of Ergotron Inc.
Anthro-DNA is a trademark of Ergotron Inc., Ergotron Inc. is a Nortek company.
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
CONGRATULATI ONS! YOUR BASE STORAGE SHELF ASSEMBLY I S COMP LE TE!
STE P 2
Install the Base Shelf
ï‚¡ Lift the Base Shelf into place
under your Zido Base so it hangs
by the tabs at the top.
ï‚¡ Install the Rear Clamp onto the
Base Shelf. Using the 1/8" hex
key, secure with two 3/8" screws.
STE P 3
Install the Front Clips
ï‚¡ Install the Front Clamp X (the one with two holes
next to the threaded opening) onto the right side
of the Base Shelf. Using the 1/8" hex key, tighten
the 1-1/4" screw. Using the 3-way wrench or an
adjustable wrench, secure with a Nylock Nut.
ï‚¡ Install Front Clip Y (the one with no additional holes
next to the threaded opening) onto the left side
of the Base Shelf. Using the 1/8" hex key, tighten
the 1-1/4" screw. Using the 3-way wrench or an
adjustable wrench, secure with a Nylock Nut.
STE P 4
Install the Grommet and Strap & Buckle Kit
ï‚¡ Press the Grommet into place lining the cable pass-through.
ï‚¡ Install the Strap & Buckle Kit using its instructions.


Product specificaties

Merk: Ergotron
Categorie: Multimedia kar
Model: ZBCG
Kleur van het product: Grijs
Breedte: 240 mm
Diepte: 320 mm
Hoogte: 115 mm
Gewicht verpakking: 6400 g
Breedte verpakking: 640 mm
Diepte verpakking: 480 mm
Hoogte verpakking: 180 mm
Soort: Plank
Maximale gewichtscapaciteit: 22.7 kg
Materiaal: Metaal

Heb je hulp nodig?

Als je hulp nodig hebt met Ergotron ZBCG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden