Bretford ECILS2M-CTMBT Handleiding

Bretford Multimedia kar ECILS2M-CTMBT

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford ECILS2M-CTMBT (4 pagina's) in de categorie Multimedia kar. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Assembly Instructions

ECILS2 / ECILS2M

NOTEBOOK-DATA

PROJECTION CART

Qty Part# Description

2 010-1863 Top & Bottom Shelves

1 010-4514 Slide Out Shelf

2 010-4507 Shelf Support Brackets

1 022-2311 Right Front Leg

1 022-2310 Left Front Leg

1 022-2313 Right Rear Leg

1 022-2312 Left Rear Leg

2 015-0002 4" Casters w/o Lock

2 015-0003 4" Casters w/ Lock

1 030-1191 14" Full Extension Slide

1 ES Electrical Unit - ECILS2M ONLY

PARTS LIST

Ref Qty Part# Description

AA 16 030-0300-10T 5/8" Square Head Bolts

BB 16 030-0002 5/16-18 Hex Serrated Nuts

CC 8 030-0304 1/4-20 x 5/8" Combo Screws

DD 8 030-1228 8-32 x 1/4" Truss Screws

EE 4 030-1203 #8-32 Acorn Nuts

FF 4 02236 8-32 Flange Whis Lock Nuts

1 010-1106 Hex Wrench

HARDWARE LIST

Lay two legs on a carpeted surface with the six top holes facing up and the brackets facing up

and in as shown in Figure 1. Slide the top and bottom shelves (with 4 square holes toward

front) onto the legs so that the brackets are inside the shelves as shown in Figure 2.

STEP 1

TOOLS REQUIRED

Hex Wrench (Provided)

Phillips Screwdriver

Rubber Mallet

FIGURE 1

FIGURE 2

BOTTOM Align shelf embossed mounting

hole with leg mounting bracket.

2 corners each shelf.

TOP

STEP 2

Slide the remaining two legs onto the shelves

so that the brackets are inside the shelves.

STEP 3

Secure shelves and legs together with bolts (AA)

and nuts (BB) in each corner as shown.

AA BB

Align shelf embossed mounting

hole with leg mounting bracket.

2 corners each shelf.

STEP 4

Insert each caster into the bottom of each leg. If

caster does not insert easily, use a rubber mallet to

tap caster in place. Once casters are SECURELY in

place, stand unit upright.

Determine which side you want your shelf to pull out from. Use FIGURE 3 as reference. Attach

the shelf support brackets to either set of holes (depending on your desired height) between the

legs with screws (CC) as shown in FIGURE 4. Then separate each slide and attach the outer

section to the inside of each shelf support bracket with screws (DD) and nuts (EE) as shown in

FIGURE 5. NOTE: Attach rear screw and nut first.

STEP 5

FIGURE 4

FIGURE 5

To access the correct

holes, slide inner piece

out slightly. Attach rear screw

& nut FIRST.

SHELF SUPPORT BRACKET

These holes need to face the edge

you want the shelf to slide out on.

FIGURE 3

CC DD EE

Product specificaties

Merk:	Bretford
Categorie:	Multimedia kar
Model:	ECILS2M-CTMBT
Kleur van het product:	Zwart
Gewicht:	18144 g
Breedte:	609.6 mm
Diepte:	457.2 mm
Hoogte:	1066.8 mm
Soort:	Multimediawagentje
Materiaal:	Staal
Aanbevolen gebruik:	Projector