Boss Turbo Distortion DS-2 Handleiding

Boss Niet gecategoriseerd Turbo Distortion DS-2

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss Turbo Distortion DS-2 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
AC Adaptor
(PSA series; sold separately)
Electric Guitar
English
LEVEL knob
This adjusts the volume of the eect sound. Clockwise rotation raises the volume
and counterclockwise rotation decreases.
7The DS-2 is a distortion unit that features a turbo circuits.
7All circuits adopt discrete system, therefore there is very low noisecreated.
7Two types of distortions are optional by changing the Turbo Modes.
7The turbo I/II can be controlled by using the footswitch connected to the Remote jack.
OUTPUT jack
Connect an amplier to this jack.
DC IN jack
Accepts connection of an AC Adaptor (PSA series; sold separately). By using an AC Adaptor, you can play
without being concerned about how much battery power you have left.
* We recommend that you keep batteries installed in the unit even though you’ll be powering it with
the AC adaptor. That way, you’ll be able to continue a performance even if the cord of the AC adaptor
gets accidentally disconnected from the unit.
* Use only the specied AC adaptor (PSA-series).
* If the AC adaptor is connected while power is on, the power supply is drawn
from the AC adaptor.
CHECK indicator
This indicator shows whether an eect is ON/OFF, and doubles as the Battery Check indicator.
The indicator lights when an eect is ON.
* If this indicator goes dim or no longer lights while an eect is ON, the battery is near
exhaustion and should be replaced immediately.
TONE knob
This adjusts the tone of the eect sound. As you rotate the knob clockwise,
higher frequencies are emphasized, and counterclockwise cuts them.
Pedal Switch
This switch turns the eects ON/OFF.
Thumbscrew
When this screw is loosened, the pedal will open, allowing you to change the
battery.
* For instructions on changing the battery, refer to “Changing the Battery.”
Panel Descriptions
Main Features
DIST knob
This adjusts the depth of the distortion eect. Rotating the knob clockwise
deepens the distortion creating powerful distortion eect.
Rotating the knob counterclockwise makes lighter distortion.
TURBO selector knob
This selects the turbo Mode I or II.
For details, refer to “Operating the Unit.”
Precautions When Connecting
5 To prevent malfunction and equipment failure, always turn
down the volume, and turn o all the units before making any
connections.
5 Once the connections have been completed, turn on power to
your various devices in the order specied. By turning on devices
in the wrong order, you risk causing malfunction and/or damage
to speakers and other devices.
When powering up: Turn on the power to your guitar amp last.
When powering down: Turn o the power to your guitar amp rst.
5 Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal and
does not indicate a malfunction.
Use of Battery
5 A battery was installed in the unit before it left the factory. The life
of this battery may be limited, however, since its primary purpose
was to enable testing.
5 If you handle batteries improperly, you risk explosion and uid
leakage. Make sure that you carefully observe all of the items
related to batteries that are listed in “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (supplied on a separate sheet).
5 When operating on battery power only, the unit’s indicator will
become dim when battery power gets too low. Replace the
battery as soon as possible.
5 Batteries should always be installed or replaced before connecting
any other devices. This way, you can prevent malfunction and
damage.
Main Specications
Nominal Input Level -20 dBu
Input Impedance 1 MΩ
Nominal Output
Level -20 dBu
Output Impedance 1 kΩ
Recommended Load
Impedance 10 kΩ or greater
Power Supply Carbon-zinc battery (9 V, 6F22) or
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw 15 mA
* Expected battery life under continuous use:
Carbon: 25.5 hours
Alkaline: 42 hours
These gures will vary depending on the
actual conditions of use.
Dimensions 73 (W) x 129 (D) x 59 (H) mm
2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
Weight 395 g / 14 oz (including battery)
Accessories Leaet (“USING THE UNIT SAFELY,” “IMPORTANT
NOTES,” and “Information”)
Carbon-zinc battery (9 V, 6F22)
Options
(sold separately)
AC adaptor (PSA-series)
* 0 dBu = 0.775 Vrms
* This document explains the specications of the product at the
time that the document was issued. For the latest information,
refer to the Roland website.
Guitar Amplier
Owner’s Manual
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet).
After reading, keep the document(s) where it will be available for immediate reference.
INPUT jack
This jack accepts input signals (coming from a guitar, some other electric or
electronic musical instrument, or another eects unit).
* The INPUT jack doubles as the power switch.
Power to the unit is turned on when you plug into
the INPUT jack; the power is turned o when the
cable is unplugged.
To prevent unnecessary battery consumption, be
sure to disconnect the plug from the INPUT jack
when not using the eects unit.
REMOTE jack
By connecting an optional footswitch such as FS-5L to this jack, you select the
Turbo Mode I or II using the pedal.
* To obtain the above remote controlling function, be
sure to set the Turbo mode selector knob to the II
(REMOTE) position.
© 2017 Roland Corporation 02
Operating the Unit
1. Make all the necessary connections, then set the knobs
on the panel as shown in the illustration.
6 5 4 3
2. Press the Pedal Switch and make sure that the CHECK
indicator lights up.
3. Set the TURBO selector knob to the desired position,
I or II.
Turbo I
Turbo I mode gives a powerful distortion sound because of
the Turbo circuits.
Featuring at characteristics, the created sound is not
mued even when the volume is turned down.
Also the distortion circuits serve to remove unpleasant
shrill caused when the sound is extremely distorted.
Turbo II
Sticky distortion with unique characteristic in middle range
sound.
The Turbo circuits provide the powerful sound of a large
vacuum tube amp played at full volume.
4. Adjust the depth of distortion with the DIST knob.
5. Adjust the tone of distortion with the TONE knob.
6. Adjust the volume of the distortion with the LEVEL
knob.
Changing the Battery
1. Hold down the pedal and loosen the thumbscrew, then
open the pedal upward.
* The pedal can be opened without detaching the thumbscrew
completely.
Thumbscrew
Battery Housing
Pedal
Spring Base
Coil Spring
Guide Bush
Hole
Battery Snap
Cord
Battery
Snap
9 V Battery
2. Remove the old battery from the battery housing, and
remove the snap cord connected to it.
3. Connect the snap cord to the new battery, and place
the battery inside the battery housing.
* Be sure to carefully observe the battery’s polarity (+ versus -).
4. Slip the coil spring onto the spring base on the back of
the pedal, and then close the pedal.
* Carefully avoid getting the snap cord caught in the pedal, coil
spring, and battery housing.
5. Finally, insert the thumbscrew into the guide bush
hole and fasten it securely.

Product specificaties

Merk: Boss
Categorie: Niet gecategoriseerd
Model: Turbo Distortion DS-2

Heb je hulp nodig?

Als je hulp nodig hebt met Boss Turbo Distortion DS-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Boss

Boss

Boss Delay DM-2W Handleiding

30 November 2024
Boss

Boss Metal Core ML-2 Handleiding

30 November 2024
Boss

Boss Tera Echo TE-2 Handleiding

30 November 2024
Boss

Boss Multi Overtone MO-2 Handleiding

30 November 2024
Boss

Boss Turbo Distortion DS-2 Handleiding

30 November 2024
Boss

Boss Bass Equalizer GEB-7 Handleiding

30 November 2024
Boss

Boss Super Chorus CH-1 Handleiding

30 November 2024
Boss

Boss BC-1X Handleiding

30 November 2024
Boss

Boss Waza Craft DM-2W Handleiding

12 November 2024
Boss

Boss GM-800 Handleiding

12 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

StarTech.com

StarTech.com 1B-USB-C-SDE-ADAPTER Handleiding

30 November 2024
StarTech.com

StarTech.com 1M25-U3-M2-ADAPTER Handleiding

30 November 2024
StarTech.com

StarTech.com 2P1FFC-USB-SERIAL Handleiding

30 November 2024
Gigabyte

Gigabyte AORUS ELITE P1000W 80+ Platinum Modular PCIe 5.0 ICE Handleiding

30 November 2024
Dali

Dali Oberon Grand Vokal Handleiding

30 November 2024
Gemini

Gemini GFB1TB Handleiding

30 November 2024
Gemini

Gemini GB20V Handleiding

30 November 2024
Gemini

Gemini GB10B Handleiding

30 November 2024
Gemini

Gemini GB20B Handleiding

30 November 2024
Gemini

Gemini GFB1B Handleiding

30 November 2024