Boss Metal Core ML-2 Handleiding

Boss Niet gecategoriseerd Metal Core ML-2

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss Metal Core ML-2 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

AC adaptor

(PSA series; sold separately)

Electric Guitar

English

LEVEL knob

This adjusts the volume of the eect sound.

7The ML-2 produces a heavy distortion with a bold attack, making it ideal for massive-sounding death-metal ris.

7The LOW control produces a deep, low sound, even if you don’t use extreme downtuning.

7The HIGH control lets you create guitar-ri sounds with lots of edge (attack) and a crisp high end.

OUTPUT jack

Connect an amplier to this jack.

Guitar Amp

DC IN jack

Accepts connection of an AC Adaptor (PSA series; sold separately). By using an AC Adaptor, you can play

without being concerned about how much battery power you have left.

* We recommend that you keep batteries installed in the unit even though you’ll be powering it with

the AC adaptor. That way, you’ll be able to continue a performance even if the cord of the AC adaptor

gets accidentally disconnected from the unit.

* Use only the specied AC adaptor (PSA-series).

* If the AC adaptor is connected while power is on, the power supply is drawn

from the AC adaptor.

CHECK indicator

This indicator shows whether an eect is ON/OFF, and doubles as the Battery Check indicator.

The indicator lights when an eect is ON.

* If this indicator goes dim or no longer lights while an eect is ON, the battery is near

exhaustion and should be replaced immediately.

LOW knob

This knob controls the tone of the eect at lower frequencies.

Turning the knob clockwise boosts the lower frequencies, while turning it

counterclockwise cuts the lower frequencies.

Pedal switch

This switch turns the eects ON/OFF.

Thumbscrew

When this screw is loosened, the pedal will open, allowing you to change the

battery.

* For instructions on changing the battery, refer to “Changing the Battery.”

Panel Descriptions

Main Features

Precautions When Connecting

5 To prevent malfunction and equipment failure, always turn

down the volume, and turn o all the units before making any

connections.

5 Once the connections have been completed, turn on power to

your various devices in the order specied. By turning on devices

in the wrong order, you risk causing malfunction and/or damage

to speakers and other devices.

When powering up: Turn on the power to your guitar amp last.

When powering down: Turn o the power to your guitar amp rst.

5 Before turning the unit on/o, always be sure to turn the volume

down. Even with the volume turned down, you might hear some

sound when switching the unit on/o. However, this is normal and

does not indicate a malfunction.

Use of Battery

5 A battery is supplied with the unit. The life of this battery may be

limited, however, since its primary purpose was to enable testing.

5 If you handle batteries improperly, you risk explosion and uid

leakage. Make sure that you carefully observe all of the items

related to batteries that are listed in “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (supplied on a separate sheet).

5 When operating on battery power only, the unit’s indicator will

become dim when battery power gets too low. Replace the

battery as soon as possible.

5 Batteries should always be installed or replaced before connecting

any other devices. This way, you can prevent malfunction and

damage.

5 The use of an AC adaptor is recommended as the unit’s power

consumption is relatively high.

5 If operating this unit on batteries, please use alkaline batteries.

Main Specications

Nominal Input Level -20 dBu

Input Impedance 1 MΩ

Nominal Output

Level -20 dBu

Output Impedance 1 kΩ

Recommended Load

Impedance 10 kΩ or greater

Power Supply Alkaline battery (9 V, 6LR61)

AC adaptor (PSA series: sold separately)

Current Draw 60 mA

* Expected battery life under continuous use:

Alkaline: 5.5 hours

These gures will vary depending on the

actual conditions of use.

Dimensions 73 (W) x 129 (D) x 59 (H) mm

2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches

Weight 420 g / 15 oz (including battery)

Accessories Leaet (“USING THE UNIT SAFELY,” “IMPORTANT

NOTES,” and “Information”)

Alkaline battery (9 V, 6LR61)

Options

(sold separately) AC adaptor (PSA-series)

* 0 dBu = 0.775 Vrms

* This document explains the specications of the product at the time

that the document was issued. For the latest information, refer to the

Roland website.

HIGH knob

This knob controls the tone of the eect at higher frequencies.

Turning the knob clockwise boosts the higher frequencies, emphasizing the

picking attack.

Turning the knob counterclockwise cuts the higher frequencies, producing a

tone in which the low-frequency sounds are more prominent.

DIST knob

This knob controls the amount of distortion applied to the sound.

Turning the knob clockwise boosts the distortion eect.

Owner’s Manual

INPUT jack

This jack accepts input signals (coming from a guitar, some other electric or

electronic musical instrument, or another eects unit).

* The INPUT jack doubles as the power

switch. Power to the unit is turned on

when you plug into the INPUT jack; the

power is turned o when the cable is

unplugged. To prevent unnecessary

battery consumption, be sure to

disconnect the plug from the INPUT jack

when not using the eects unit.

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet).

After reading, keep the document(s) where it will be available for immediate reference.

Operating the Unit

1. When you have made the necessary

connections, set the knobs as shown

in the illustration.

2. Depress the pedal switch to turn the eect on. (The

CHECK indicator lights when the eect is on.)

3. Adjust the amount of distortion with

the DIST knob.

4. Adjust the amount of high-

frequency sound with the HIGH

knob.

5. Adjust the amount of low-frequency

sound with the LOW knob.

6. Adjust the output volume with the

LEVEL knob.

Normally, you should adjust the LEVEL knob

so there’s no dierence in the volume when

switching the eect on and o.

Changing the Battery

1. Hold down the pedal and loosen the thumbscrew, then

open the pedal upward.

* The pedal can be opened without detaching the thumbscrew

completely.

Thumbscrew

Battery Housing

Pedal

Spring Base

Coil Spring

Guide Bush

Hole

Battery Snap

Cord

Battery

Snap

9 V Battery

2. Remove the old battery from the battery housing, and

remove the snap cord connected to it.

3. Connect the snap cord to the new battery, and place

the battery inside the battery housing.

* Be sure to carefully observe the battery’s polarity (+ versus -).

4. Slip the coil spring onto the spring base on the back of

the pedal, and then close the pedal.

* Carefully avoid getting the snap cord caught in the pedal, coil

spring, and battery housing.

5. Finally, insert the thumbscrew into the guide bush

hole and fasten it securely.

Product specificaties

Merk:	Boss
Categorie:	Niet gecategoriseerd
Model:	Metal Core ML-2

Heb je hulp nodig?

Als je hulp nodig hebt met Boss Metal Core ML-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Boss

Boss Delay DM-2W Handleiding

30 November 2024

Boss Metal Core ML-2 Handleiding

30 November 2024

Boss Tera Echo TE-2 Handleiding

30 November 2024

Boss Multi Overtone MO-2 Handleiding

30 November 2024

Boss Turbo Distortion DS-2 Handleiding

30 November 2024

Boss Bass Equalizer GEB-7 Handleiding

30 November 2024

Boss Super Chorus CH-1 Handleiding

30 November 2024

Boss BC-1X Handleiding

30 November 2024

Boss Waza Craft DM-2W Handleiding

12 November 2024

Boss GM-800 Handleiding

12 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

StarTech.com 1B-USB-C-SDE-ADAPTER Handleiding

30 November 2024

StarTech.com 1M25-U3-M2-ADAPTER Handleiding

30 November 2024

StarTech.com 2P1FFC-USB-SERIAL Handleiding

30 November 2024

Gigabyte AORUS ELITE P1000W 80+ Platinum Modular PCIe 5.0 ICE Handleiding

30 November 2024

Dali Oberon Grand Vokal Handleiding

30 November 2024

Gemini GFB1TB Handleiding

30 November 2024

Gemini GB20V Handleiding

30 November 2024

Gemini GB10B Handleiding

30 November 2024

Gemini GB20B Handleiding

30 November 2024

Gemini GFB1B Handleiding

30 November 2024