Bobrick B-5456 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Bobrick B-5456 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. Form No. B-545-200 r102918
© 201 by Bobrick Washroom Equipment, Inc.8
Technical Data
Y
Finish Face of Wall
33mm
(1-5/16")
2 Plcs.
S
S
Bar
Concealed
Setscrew (2)
Mounting
Flange (2)
Left Post Right Post
S
S
95mm
(3-3/4")
2 Plcs.
13mm
(1/2")
2 Plcs.
12mm
(15/32") Dia. 83mm
(3-1/4")
2 Plcs.
49mm
(1-15/16") Dia.
2 Plcs.
Flange Cover (2)
19mm
(3/4") Dia.
2 Plcs.
L
MATERIALS:
Post — 18-8, ype-304, 19mm (3/4") diameter, solid stainless steel rod. Post and Concealed MountingT
Threaded Flange are machined as one piece.
Bar 18-8, ype-304, 12mm (15/32") diameter, solid stainless steel rod. Secured to Posts with two(2) concealed set screws.T
Concealed Mounting Threaded Flange 18-8, ype-304, 6mm (7/32") thick, stainless steel plate with thread on outsideT
edge for fastening cover. 46mm (1-13/16") outside diameter with two holes for attachment to wall.
Threaded Flange Cover 18-8, ype-304, 1mm (17-gauge), machined stainless steel. 49mm (1-15/16") diameter 13mm (1/2") deep. Cover T
fastens over mounting flange to conceal mounting screws.
INSTALLATION:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts. For partitions with particle-board or other
solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal
partitions, provides a solid backing into which the sheet-metal screws (not furnished) can be secured. NOTE: centerline-to-
centerline of mounting flanges must be within 2mm (1/16") of the Y dimension given.
SPECIFICATION:
Towel bar shall be ype-304 stainless steel with ________________ (insert one satin finish or bright polished) finish. Towel bar T
shall have two (2) 19mm (3/4") diameter posts. Bar shall be 12mm (15/32") diameter secured to post with two (2) concealed
set screws. Concealed mounting flange shall be 6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and
equipped with two screw holes for attachment and thread on outside edge to fasten cover. Threaded flange cover shall be 1mm
(17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws. Post
and mounting flange are to be machined as one piece.
Towel Bar shall be Model (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park, __________
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
TOWEL BAR B-545
B-5456
B-545 Satin-finish stainless steel
B-5456 Bright Polished stainless steel
Specify Model Required:
Bar
Length
L
Model
No.
STANDARD STOCK SIZES
Centerline-
to-Centerline
Y
B-545 x 18 460mm (18") 450mm (17-5/8")
B-545 x 24 610mm (24") 600mm (23-5/8")
B-5456 x 18 460mm (18") 450mm (17-5/8")
B-5456 x 24 610mm (24") 600mm (23-5/8")


Product specificaties

Merk: Bobrick
Categorie: Niet gecategoriseerd
Model: B-5456

Heb je hulp nodig?

Als je hulp nodig hebt met Bobrick B-5456 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Bobrick

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd