Blade Vortex 150 Pro BNF Basic Handleiding

Blade Radiografisch bestuurbaar speelgoed Vortex 150 Pro BNF Basic

Lees hieronder de 📖 handleiding in het Nederlandse voor Blade Vortex 150 Pro BNF Basic (17 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/17

150 Mini Getting Started Guide

International edition

Rev 1.0 - Dec 2016

Every Vortex 150 Mini is flight tested before

leaving the factory.

Flight Tested By:

WARNING

Congratulations on your purchase of one of the hobby’s first ARF pure-bred racing quadcopters. A

product designed by FPV Racers, for FPV Racers.

Do not expect it to fly like a DJI Phantom . It does not have a return-to-home feature, no GPS, and it ™

does not have stabilization features that will allow your little brother to fly.

Take it easy if you are new to the world of FPV racing, try to avoid slamming the quad into the first wall

before you have mastered slaloming through the trees on the way to the wall.

Acro mode is something that should be learned as soon as possible, flying any other mode is a bit like

driving a Lamborghini around a parking-lot in reverse not exactly what you bought the Lambo for. …

Please carefully read the recommendations in this getting started guide, as far as equipment/battery

selection, and how to run the Vortex 150 Mini Wizard.

REMOVE PROPS

Mini-quad props can do serious damage when coming in contact with human skin, risk of deep cuts and

lacerations should be avoided at all cost.

So when you are working on a quad with the battery connected, it is highly recommended to REMOVE

ALL PROPS, unless you are just about to fly. Keep in mind that when setting up mini-quads, there is

always a remote chance that a configuration change can spin up motors unexpectedly.

ImmersionRC accepts no responsibility, or liability, for any injury, or damage, to persons or property, caused

by the use of the Vortex.

INSTALL ANTENNA

The Video Transmitter included in the Vortex may be damaged permanently if run without the supplied

SpiroNET Antenna. Please take care to install this antenna before every flight, and when powering up the

Vortex for even a short time period.

ImmersionRC accepts no responsibility for damage caused to the Vortex by operating without a suitable Tx

antenna installed.

4 Steps: Unboxing to Racing

To get your ARF Vortex ready to race, follow the simple 4-step process below.

1) Install Compatible R/C Receiver

2)Install suitable battery

3) Setup the video link

4) Run the wizard

Product specificaties

Merk:	Blade
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	Vortex 150 Pro BNF Basic
Kleur van het product:	Black, Green
Gewicht:	250 g
Soort:	Quadcopter
Gebruikershandleiding:	Ja
Frequentieband:	2.4 GHz
Ingebouwde camera:	Nee
Constructietype:	Bind-N-Fly (BNF)
Type product:	Quadcopter
Type motor:	Elektromotor
Aantal propellers:	- propellers
Reproductie:	Nee
First-person view (FPV):	Ja