Berkel 825E-PLUS Handleiding

Berkel Snijmachine 825E-PLUS

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Berkel 825E-PLUS (8 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
BK45760 Rev. A (February 2015)
MODELS
823E-PLUS, 825E-PLUS,
825A-PLUS, 827E-PLUS,
827A-PLUS, & 829E-PLUS
SLICERS
OWNER/OPERATOR
MANUAL
IMPORTANT NOTICE
This manual contains Important Safety
Instructions which must be strictly
followed when using this equipment.
14 โ€ข OWNER/OPERATOR MANUAL BK45760 Rev. A (02-15)
Sharpening Instructions
CAUTION
The knife should be sharpened at a minimum on a daily basis. Do not sharpen a knife that is not
FOHDQ๎˜‘๎˜ƒ<RX๎˜ƒZLOO๎˜ƒGDPDJH๎˜ƒWKH๎˜ƒ6KDUSHQLQJ๎˜ƒVWRQHV๎˜ƒDQG๎˜ƒEH๎˜ƒXQDEOH๎˜ƒWR๎˜ƒVKDUSHQ๎˜ƒWKH๎˜ƒNQLIH๎˜‘
๎˜”๎˜‘๎˜ƒ 6ZLWFK๎˜ƒ2))๎˜ƒWKH๎˜ƒSRZHU๎˜‘
2. Unplug the slicer.
3. Turn the thickness control knob fully to the right to place the gauge plate in the fully closed
position.
๎˜—๎˜‘๎˜ƒ Clean the knife completely. Always clean from the center towards the outside edge of the knife.
1HYHU๎˜ƒPRYH๎˜ƒ\RXU๎˜ƒKDQG๎˜ƒWRZDUGV๎˜ƒWKH๎˜ƒHGJH๎˜ƒRI๎˜ƒWKH๎˜ƒNQLIH๎˜‘
5. Loosen the sharpener locking knob, raise and rotate the sharpener until the stones sit with one
on each side of the knife. Retighten the knob to hold the sharpener in its sharpening position.
6. Plug in the slicer and switch on the power.
7. Press the sharpening stone push-button to bring the stone against the knife and hold it for 5 to
๎˜”๎˜“๎˜ƒVHFRQGV๎˜ƒDQG๎˜ƒUHOHDVH๎˜‘๎˜ƒ:KHQ๎˜ƒWKH๎˜ƒVKDUSHQHU๎˜ƒLV๎˜ƒWKH๎˜ƒLQ๎˜ƒWKH๎˜ƒVKDUSHQLQJ๎˜ƒSRVLWLRQ๎˜๎˜ƒWKH๎˜ƒVKDUSHQLQJ๎˜ƒ
stone push-button is on the left side of the knife.
8. Press the deburring stone push-button to bring the stone against the knife and hold it for 2 to 3
seconds and release. When the sharpener is the in the sharpening position, the sharpening stone
push-button is on the right side of the knife.
9. 6ZLWFK๎˜ƒ2))๎˜ƒWKH๎˜ƒSRZHU๎˜‘
๎˜”๎˜“๎˜‘๎˜ƒReturn the sharpener to its stored position and lock in place.
๎˜”๎˜”๎˜‘๎˜ƒ Clean slicer before slicing product. (See โ€œCleaning and Sanitizing instructionโ€).
<RXU๎˜ƒVOLFHU๎˜ƒLV๎˜ƒQRZ๎˜ƒVKDUSHQHG๎˜๎˜ƒFOHDQHG๎˜ƒDQG๎˜ƒVDQLWL]HGยฒUHDG\๎˜ƒWR๎˜ƒXVH๎˜‘
SHARPENER MAINTENANCE
๎˜”๎˜‘๎˜ƒ 7XUQ๎˜ƒ2))๎˜ƒWKH๎˜ƒVOLFHU๎˜๎˜ƒWXUQ๎˜ƒLQGH[๎˜ƒNQRE๎˜ƒIXOO\๎˜ƒWR๎˜ƒWKH๎˜ƒULJKW๎˜ƒDQG๎˜ƒXQSOXJ๎˜ƒWKH๎˜ƒSRZHU๎˜ƒFRUG๎˜ƒIURP๎˜ƒWKH๎˜ƒ
receptacle.
2. Loosen the sharpener locking knob and lift off the sharpener.
3. &OHDQ๎˜ƒWKH๎˜ƒFRYHU๎˜ƒZLWK๎˜ƒZDWHU๎˜ƒDQG๎˜ƒGHWHUJHQW๎˜‘๎˜ƒ&DUHIXOO\๎˜ƒFOHDQ๎˜ƒWKH๎˜ƒVKDUSHQHU๎˜ƒDVVHPEO\๎˜ƒDQG๎˜ƒDURXQG๎˜ƒ
the stones. DO NOT submerge the sharpener assembly. Oil the spindle and bearing assemblies
ZLWK๎˜ƒ%HUNHO๎˜ƒ)RRG๎˜ƒ0DFKLQH๎˜ƒ2LO๎˜‘
๎˜—๎˜‘๎˜ƒ Check the stones. If they do not turn freely, are greasy or are full of metallic build-up, they must
be cleaned. (See โ€œCleaning the Sharpening Stonesโ€). If the stones are cracked or chipped they
must be replaced.
5. 2LO๎˜ƒWKH๎˜ƒVKDUSHQHU๎˜ƒVKDIWV๎˜‘๎˜ƒ3ODFH๎˜ƒD๎˜ƒIHZ๎˜ƒGURSV๎˜ƒRI๎˜ƒ%HUNHO๎˜ƒ)RRG๎˜ƒ0DFKLQH๎˜ƒ2LO๎˜ƒRQ๎˜ƒHDFK๎˜ƒVKDIW๎˜‘๎˜ƒ0RYH๎˜ƒWKH๎˜ƒ
VKDUSHQLQJ๎˜ƒDQG๎˜ƒGHEXUULQJ๎˜ƒVWRQH๎˜ƒSXVK๎˜ƒEXWWRQV๎˜ƒEDFN๎˜ƒDQG๎˜ƒIRUWK๎˜ƒWR๎˜ƒPDNH๎˜ƒVXUH๎˜ƒWKDW๎˜ƒWKH๎˜ƒVWRQHV๎˜ƒPRYH๎˜ƒ
in and out easily. Also, rotate the stones to make sure they turn freely.
6. Oil the mounting post.
7. Replace the sharpener. Sharpener must be all the way down protecting the top of the knife.
Lock in place.
16 โ€ข OWNER/OPERATOR MANUAL BK45760 Rev. A (02-15)
Repair Parts/Repair Service/Exploded Views
3OHDVH๎˜ƒFRQWDFW๎˜ƒ+REDUW๎˜ƒ6HUYLFH๎˜ƒRU๎˜ƒ\RXU๎˜ƒGHVLJQDWHG๎˜ƒ%HUNHO๎˜ƒ6HUYLFH๎˜ƒ/RFDWLRQ๎˜ƒ๎˜‹'%6/๎˜Œ๎˜ƒIRU๎˜ƒDQ\๎˜ƒUHSDLU๎˜ƒ
SDUWV๎˜’UHSDLU๎˜ƒVHUYLFH๎˜ƒUHTXLUHG๎˜ƒRQ๎˜ƒ\RXU๎˜ƒ%HUNHO๎˜ƒVOLFHU๎˜‘๎˜ƒ)RU๎˜ƒWKH๎˜ƒQHDUHVW๎˜ƒ+REDUW๎˜ƒVHUYLFH๎˜ƒRIยฟFH๎˜๎˜ƒSOHDVH๎˜ƒYLVLW๎˜ƒ
ZZZ๎˜‘KREDUWVHUYLFH๎˜‘FRP๎˜ƒDQG๎˜ƒWKHQ๎˜ƒFOLFN๎˜ƒRQ๎˜ƒยณORFDWH๎˜ƒDQ๎˜ƒRIยฟFHยด๎˜‘๎˜ƒ๎˜ƒ7KHQ๎˜ƒHLWKHU๎˜ƒHQWHU๎˜ƒ\RXU๎˜ƒ=,3๎˜ƒ&2'(๎˜ƒRU๎˜ƒ
VHOHFW๎˜ƒD๎˜ƒVWDWH๎˜ƒWR๎˜ƒยฟQG๎˜ƒWKH๎˜ƒFORVHVW๎˜ƒORFDWLRQ๎˜‘๎˜ƒ2U๎˜ƒ\RX๎˜ƒFDQ๎˜ƒDOVR๎˜ƒYLVLW๎˜ƒZZZ๎˜‘EHUNHOHTXLSPHQW๎˜‘FRP๎˜ƒDQG๎˜ƒFOLFN๎˜ƒRQ๎˜ƒ
WKH๎˜ƒยณ6HUYLFH๎˜ƒWDEยด๎˜‘๎˜ƒ7KHQ๎˜ƒHQWHU๎˜ƒ\RXU๎˜ƒ=,3๎˜ƒ&2'(๎˜ƒ๎˜ƒWR๎˜ƒEH๎˜ƒVKRZQ๎˜ƒWKH๎˜ƒFORVHVW๎˜ƒ+REDUW๎˜ƒRU๎˜ƒ%HUNHO๎˜ƒ'%6/๎˜ƒVHUYLFH๎˜ƒ
ORFDWLRQV๎˜‘๎˜ƒ2WKHU๎˜ƒSURGXFW๎˜ƒLQIRUPDWLRQ๎˜ƒVXFK๎˜ƒDV๎˜ƒ3DUWV๎˜ƒ&DWDORJV๎˜ƒDQG๎˜ƒ,QVWUXFWLRQ๎˜’2SHUDWRU๎˜ƒ0DQXDOV๎˜ƒDUH๎˜ƒDOVR๎˜ƒ
DYDLODEOH๎˜ƒRQ๎˜ƒWKH๎˜ƒZZZ๎˜‘EHUNHOHTXLSPHQW๎˜‘FRP๎˜ƒZHEVLWH๎˜‘๎˜ƒ&OLFN๎˜ƒRQ๎˜ƒWKH๎˜ƒยณ5HVRXUFH๎˜ƒ&HQWHU๎˜ƒWDEยด๎˜๎˜ƒ๎˜ƒDQG๎˜ƒWKHQ๎˜ƒFOLFN๎˜ƒ
on the information category you want to read or download. Be sure to enter your product model num-
ber.Additional information may be obtained from:
Berkel Company
2006 Northwestern Parkway
/RXLVYLOOH๎˜๎˜ƒ.<๎˜ƒ๎˜—๎˜“๎˜•๎˜“๎˜”
3KRQH๎˜๎˜ƒ๎˜›๎˜“๎˜“๎˜๎˜–๎˜—๎˜›๎˜๎˜“๎˜•๎˜˜๎˜”
)D[๎˜๎˜ƒ๎˜›๎˜›๎˜›๎˜๎˜›๎˜›๎˜›๎˜๎˜•๎˜›๎˜–๎˜›
www.berkelequipment.com

Product specificaties

Merk: Berkel
Categorie: Snijmachine
Model: 825E-PLUS

Heb je hulp nodig?

Als je hulp nodig hebt met Berkel 825E-PLUS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Berkel

Berkel

Berkel MB7 Handleiding

17 November 2024
Berkel

Berkel MB3-8STD Handleiding

15 Augustus 2023
Berkel

Berkel MB3-4STD Handleiding

15 Augustus 2023
Berkel

Berkel MB7-16STD Handleiding

15 Augustus 2023
Berkel

Berkel MB1-2STD Handleiding

15 Augustus 2023
Berkel

Berkel 932 Handleiding

13 Juni 2023
Berkel

Berkel 834-S combi Handleiding

13 Juni 2023
Berkel

Berkel 834-S Handleiding

13 Juni 2023
Berkel

Berkel Red Line 200 Handleiding

8 Juli 2023
Berkel

Berkel 300M Handleiding

6 Juli 2023

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Livoo

Livoo MEN429 Handleiding

20 December 2024
Royal Catering

Royal Catering RCTC-5 Handleiding

17 December 2024
Royal Catering

Royal Catering RCGT-2 Handleiding

17 December 2024
Royal Catering

Royal Catering RCGS 155M Handleiding

17 December 2024
Gude

Gude GHF 800 Handleiding

8 December 2024
Toolland

Toolland PH360 Handleiding

7 December 2024
Boss

Boss Slicer SL-2 Handleiding

30 November 2024
Philco

Philco PHFS 6100 Handleiding

30 November 2024
Livoo

Livoo MEN435 Handleiding

20 November 2024
Cecotec

Cecotec Rock'nCut Advance Handleiding

20 November 2024