BDI Eileen Shelf 5156 Handleiding

BDI Niet gecategoriseerd Eileen Shelf 5156

Lees hieronder de 📖 handleiding in het Nederlandse voor BDI Eileen Shelf 5156 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

D - Machine Screw x 8

A1 - Glass Shelf x 1

A2 - Glass Shelf x 1

A3 - Glass Shelf x 1

A4 - Glass Shelf x 1

A5 - Glass Shelf x 1

Left Frame x 1

Right Frame x 1

Top Frame x 1

Bottom Frame x 1

F - Rubber Bumper x 2

E - Washer x 8

H - Leveler x 2

G - Hex Drive

Eileen Shelf is engineered for easy assembly. Carefully follow this

procedure to prevent any damage.

Placement and Maintenance

Eileen Shelf is designed for indoor use on level floors. Clean glass with

glass cleaner, and steel parts and wood veneer with a moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. The assembly workspace

should be a non-marring surface such as carpet. For missing

hardware pieces, please contact BDI Customer Service at

customerservice@bdiusa.com. For all other concerns, please contact

your BDI Retailer.

Step 2

Assemble wood frame

Connect and with andLeft Frame Right Frame Top Frame Bottom

Frame Machine Screw (D), Washer (E) Hex Drive (G). using and

Component List

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws.

BDI is trademark of Becker Designed, Inc.

Made in China. 03082010v25156REV

a s s e m b l y i n s t r u c t i o n s

bdiusa bdiusa.com customerservice@ .com

EilEEn ShElf

5156

Bottom Frame

Top Frame

Right Frame

Left Frame

D x 8

E x 8

assembly instructions

bdiusa bdiusa.com customerservice@ .com

F x 2

H x 2

Step 3

Install Levelers and Rubber Bumper Inserts

Install and as shown below.Levelers (H) Rubber Bumper Inserts (F)

Step5

Secure Glass Shelves

Once shelves have been installed, tighten the plastic threaded insert

on the bottom of shelf bracket using a Phillips screwdriver.

Step 4

Install Glass Shelves

Install glass shelves to all slot locations on left frame and right frame.

assembly instructions

bdiusa bdiusa.com customerservice@ .com

Restraint Str

Wall Screw

1/8”

Side Elevation

The rear edge of all shelves (except

bottom shelf) should be approximately

1/8” from the wall.

Step 6

Once step 4 and 5 have been completed, lift assembled Eileen against

the wall.

Step 6 - Install Tipping Restraint Kit.

On the rear side of the top frame, there is a pre-drilled hole for

installing the HH510 Furniture Tipping Restraint Kit (included).

This tip restraint must be attached to a wall stud using the

2” screw enclosed.

1. Attach a bracket to the back top rail or back top edge of the

mirror, using the 5/8” screw provided, through the smaller hole

in the bracket.

2. Determine where mirror is to be placed and mark location on

the wall over a wall stud for the wall bracket hole approximately 2”

below the mounting bracket secured to the back of your mirror.

Attach to the wall stud, using the 2” screw provided, through the

smaller hole.

3. Place the mirror into position so both mounting brackets are

vertically in line.

4. Lace the end of the restraint strap through the larger hole

in each bracket. Bring both ends together and slide the flat

end through the locking end and draw it through until all slack is

removed.

5. Confirm that strap is securely laced and locked.

Approx. 2”

To Wall

2" Wall Screw

5/8" Screw

To Mirror

Restraint Strap

*Note HH-510 Furniture Tipping Restraint Kit

is supplied by Walter of Wabash. For further

information, visit www.walterofwabash.com

Product specificaties

Merk:	BDI
Categorie:	Niet gecategoriseerd
Model:	Eileen Shelf 5156
Kleur van het product:	Walnoot
Gewicht:	39000 g
Breedte:	870 mm
Diepte:	460 mm
Hoogte:	1880 mm
Aantal:	1
Geschikte locatie:	Dining room, Living room, Office, Study