Bauknecht WA 4330 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Bauknecht WA 4330 (23 pagina's) in de categorie Wasmachines. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
19
QUICK REFERENCE GUIDE GB
BEFORE USING THE APPLIANCE FOR THE FIRST TIME:
• FOLLOW THE “INSTALLATION INSTRUCTIONS”.
• REMOVE THE TRANSIT BOLTS BEFORE USING THE APPLIANCE.
• First wash cycle without laundry:
1. Turn on the tap.
2. Close the appliance door.
3. Pour a small amount of detergent (about 30 ml) into the detergent dispenser .
4. Select a short program (see programme chart).
5. Press the “On/Off”
button.
This initial cycle serves to eliminate any water remaining after your appliance was tested at
the factory.
NORMAL DAILY USE:
1. Turn on the tap.
2. Sort the wash according to fabric type and colour and load the appliance.
3. Close the door.
4. Put in detergent and any additives required into the dispenser.
5. Select the programme, the temperature and any special options required.
6. Press the “On/Off”
button.
20
GB CONTENTS
INSTALLATION INSTRUCTIONS PAGE 21
APPLIANCE AND ACCESSORIES PAGE 25
CHILD SAFETY PAGE 25
PROTECTING THE ENVIRONMENT PAGE 26
SAFETY INSTRUCTIONS PAGE 26
TRANSPORT / HANDLING PAGE 26
PREPARING THE WASH PAGE 27
DETERGENT AND ADDITIVES PAGE 28
DYEING AND BLEACHING PAGE 29
PROGRAMME SELECTION / PROGRAMME START PAGE 29
DOOR LOCK / PROGRAMME END PAGE 30
CHANGING / INTERRUPTING /
CLEARING PROGRAMME PAGE 30
REMOVING THE FILTER PAGE 31
DRAINING RESIDUAL WATER PAGE 32
CARE AND MAINTENANCE PAGE 32
TROUBLESHOOTING GUIDE PAGE 33
AFTER-SALES SERVICE PAGE 34
21
Never move the appliance by carrying it at the
worktop.
TRANSIT BOLTS
The appliance is fitted with transit bolts to prevent
internal damage during transport.
Before using the machine you must remove
the transit bolts (Fig. 1).
1. Slacken the four bolts with the wrench
supplied (Fig. 2).
2. Unscrew the bolts by hand.
3. Holding the bolt head, pull each bolt through
the wide part of the holes.
4. Close the holes with the plastic covers supplied;
insert the covers in the wide part of the hole and
slide them toward the narrow part until they click
into place (Fig. 3).
5. Keep the transit bolts for future use.
Important
Whenever the appliance is transported, the transit
bolts must be refitted.
Pry up the plastic covers with a screwdriver, slide
them in the opposite direction to the arrow and
remove. Insert the transit bolts, performing the
steps for removal in reverse order.
INSTALLATION INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3


Product specificaties

Merk: Bauknecht
Categorie: Wasmachines
Model: WA 4330

Heb je hulp nodig?

Als je hulp nodig hebt met Bauknecht WA 4330 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachines Bauknecht

Handleiding Wasmachines

Nieuwste handleidingen voor Wasmachines