BASSBOSS ZV28-MK3 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor BASSBOSS ZV28-MK3 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
User ManUal
Double 18ā€
Powered Subwoofer
ZV28-MK3
ZV28-MK3 User Manual
2
Table of Contents
Overviewī˜™ 2
Quickī˜™Startī˜™Guideī˜™ 4
Outboardī˜™Processorī˜™Warningī˜™ 5
Setupī˜™Procedureī˜™ 5
Operationī˜™andī˜™Controlsī˜™ 6
Indicatorī˜™LEDsī˜™ 6
Howī˜™toī˜™Useī˜™theī˜™Presetsī˜™ 7
Pre-Installedī˜™Onboardī˜™Presetsī˜™ 8
Powerī˜™Distributionī˜™ 9
Troubleshootingī˜™ 9
Cardioidī˜™Modeī˜™ 10
Specificationsī˜™ 11
Warrantyī˜™ 12
Safetyī˜™Informationī˜™ 13
Importantī˜™Notesī˜™ 14
FCCī˜™Complianceī˜™Noticeī˜™ 14
Overview
The BASSBOSS ZV28-MK3 Subwoofer is designed to bring you up close and personal with the
boundaries of audible sound. Reveal notes unfathomable with other subwoofers, delivered eīš…ortlessly.
Frequencies that push other systems to their limits are brought to life powerfully and smoothly. The
ZV28-MK3 isnā€™t just about hearing; itā€™s about feeling the power of the music.
The ZV28-MK3 is a vented, direct radiating subwoofer with a substantial internal volume, tuned to a low
frequency. Advanced design features such as anti-standing wave baīš…les and pass-through dampers help
reduce upper resonances while oversized ports enhance low-frequency performance at high output.
The ZV28-MK3 is built to run at full throttle. The woofers are kept within safe thermal and excursion
limits throughout their operating range regardless of input level. The design guarantees a consistently
flat frequency response, with a pair delivering -3dB to an impressive 21 Hz. This performance is achieved
Este manual estƔ disponible en espaƱol en nuestro sitio web en bassboss.com/support
Double 18ā€
Powered Subwoofer
ZV28-MK3
bassboss.com
3
without any need for equalization, and is available on demand at high levels in real-world scenarios.
Unlike other subs that may promise much but deliver little, the ZV28-MK3 actually performs as
impressively in the field as it seems to on paper. Be cautious of loudspeaker systems that rely on bass-
boost processing to meet their claimed frequency response, as they can often fall short when it comes
to delivering quality sound at maximum power.
The ZV28-MK3 features a 5000W amplifier with an auto-sensing, globally compatible power
supply that can run on input voltages anywhere between 90 and 250 Volts. Full output power is
available on anything over 110V. The amplifierā€™s peak-output voltage provides for intense high SPL
hits while its sustained output is unparalleled in its ability to deliver the liquid lows. The amplifier
is passively cooled via its external heat-sink and by woofer-generated air-flow through the port.
When necessary, four blower-fans will engage to provide additional forced-air cooling capacity in more
extreme conditions.
New to the MK3 are Neutrik powerCON True 1 TOP (Total Outdoor Protection) waterproof mains
connectors. Waterproof mains connectors along with a totally isolated input connection section and
cones that are waterproofed make the MK3 series the powered loudspeakers that can be used outdoors
without fear of what the weather will bring. (Or used indoors without fear of what the partiers bring.)
Electrical power is converted into the much more desirable acoustical power by two robust, neodymium
motor, 18-inch woofers with massive 4.5-inch (115mm) voice coils. Neodymium magnets are lighter, and
their higher intensity provides higher eīš…iciency, so the result is a lighter and louder cabinet than those with
ferrite drivers.
The MK3 features an all-new DSP. The comprehensive suite of processing includes high-pass and low-
pass filters as well as multiple protection systems and limiters to prevent driver overload in as many
ways as possible, including thermal, excursion and clipping. The five levels of protection actively prevent
overheating of the voice coil, minimize long-term thermal compression and limit excursion. Because they
operate in 5 diīš…erent modes, the limiters are sophisticated enough to have a largely unnoticeable eīš…ect
on the transient response and allow the subwoofer to deliver peak output safely.
The new DSP features an Ethernet interface. This can be used to control the cabinets from a computer
or to load software or firmware updates. The ethernet connectivity in conjunction with the DSP board
allows signal to be sent via Milan AVB. Firmware updates will provide access to this feature.
Within the software, multiple cabinets can be grouped together, allowing them to respond to commands
simultaneously. This permits the levels of multiple loudspeakers to be adjusted together and yet
independently from the levels of other groups of loudspeakers. In addition to individual and grouped
level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet
includes a two-port switch so multiple cabinets can be chained on the same data cable.
The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch
of a button with no need for a connected computer. The eight directly accessible presets are compatible
with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs.


Product specificaties

Merk: BASSBOSS
Categorie: Niet gecategoriseerd
Model: ZV28-MK3

Heb je hulp nodig?

Als je hulp nodig hebt met BASSBOSS ZV28-MK3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd BASSBOSS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd