BASSBOSS SSP215-MK3 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor BASSBOSS SSP215-MK3 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
User ManUal
Double 15ā€
Powered Subwoofer
SSP215-MK3
SSP215-MK3 User Manual
2
Table of Contents
Overviewī˜™ 2
Quickī˜™Startī˜™Guideī˜™ 4
Outboardī˜™Processorī˜™Warningī˜™ 5
Setupī˜™Procedureī˜™ 5
Operationī˜™andī˜™Controlsī˜™ 6
Indicatorī˜™LEDsī˜™ 6
Howī˜™toī˜™Useī˜™theī˜™Presetsī˜™ 7
Pre-Installedī˜™Onboardī˜™Presetsī˜™ 8
Powerī˜™Distributionī˜™ 9
Troubleshootingī˜™ 9
Cardioidī˜™Modeī˜™ 10
Specificationsī˜™ 11
Warrantyī˜™ 12
Safetyī˜™Informationī˜™ 13
Importantī˜™Notesī˜™ 14
FCCī˜™Complianceī˜™Noticeī˜™ 14
Overview
The SSP215-MK3 combines sensitivity, depth, power handling and fidelity. It oīš­ers amazing versatility and
practicality for those who need a lot of low end for a wide variety of applications, particularly when space
is limited. It delivers output comparable to a double-18ā€ subwoofer from narrow spaces where double-18ā€
subwoofers wouldnā€™t fit.
The SSP215-MK3 is equipped with extremely rugged, very high power handling, long excursion drivers in a
carefully optimized cabinet that provides suīš­icient volume and port area to allow its 15ā€ woofers to deliver as
much depth as possible. It provides consistent output with minimal thermal compression thanks to the several
eīš­ective but transparent protection systems that are part of the integrated signal processing. The multiple
protection systems work independently to prevent over-excursion, thermal overload of the voice coils, and
minimize long-term thermal compression. Since they work independently, reacting to diīš­erent stimuli, their
eīš­ect on the transient response and peak output of the loudspeaker is almost imperceptible.
Double 15ā€
Powered Subwoofer
SSP215-MK3
Esteī˜™manualī˜™estĆ”ī˜™disponibleī˜™enī˜™espaƱolī˜™enī˜™nuestroī˜™sitioī˜™webī˜™enī˜™bassboss.com/support
bassboss.com
3
The SSP215-MK3 achieves extremely flat frequency response, measuring Ā±1dB from 35Hz to 100Hz. No
equalization is utilized to achieve this response. Unlike designs that require equalization to achieve their
specified response, the SSP215-MK3ā€™s response is part of the cabinet design, so that the sensitivity of the speaker
remains consistent through its operating range. This allows it to achieve higher SPL at lower frequencies using
less power than systems that require bass-boost EQ to achieve their stated response. This design philosophy is
how BASSBOSS subs can deliver more SPL at lower frequencies without needing more power.
Versatility is one of the SSP215-MK3s greatest strengths. The performance of the SSP215 can be compared
to almost any double-18ā€ sub on the market but will fit where they donā€™t. Taking up 50% less space than the
SSP218, and delivering almost the same sound levels over very nearly the same frequency range, the SSP215
allows big sound to be hidden in small spaces. If you need a serious sub to fit under a low stage, this is it. If you
need to fly a sub under a low ceiling, this is it. If you need a sub to go under a seating or banquette platform,
this is it. If you need to hide a sub between roof support beams or Z-bar, this is it. If you need a sub to stand
unobtrusively in a corner, this is it.
The enclosures feature four large rubber feet and corresponding recesses in their tops to facilitate interlocking
the boxes when stacked. They share the same footprint as the SSP218, so the feet also interlock with the
available wheel carts, allowing multiple boxes to be stacked on a cart for rapid deployment with minimal eīš­ort.
The stacked setā€™s footprint measures 29.5ā€ x 48ā€, making it easy to fit them securely in almost any commercial
truck. The carts can accommodate up to 5 subwoofers, allowing for extremely tight truck-pack density. Five,
four or three-high stacks or three-high cardioid stacks can be pre-configured on carts, ready to roll in and rock!
The cabinets are made from 18mm Birch plywood, are extensively braced and feature 4 ergonomic recessed
handles. They are coated in weatherproof high-pressure Poly urea and the drivers are protected by a powder-
coated, perforated steel grille. The cones also feature a waterproof coating.
The SSP215-MK3 features a 5000W amplifier with an auto-sensing, globally compatible power supply that can
run on input voltages anywhere between 90 and 250 Volts. Full output power is available on anything over 110V.
The amplifier ā€™s peak-output voltage provides for intense high SPL hits while its sustained output is unparalleled
in its ability to deliver the liquid lows. The amplifier is passively cooled via its external heat-sink and by woofer-
generated air-flow through the port. When necessary, two large axial fans will engage to provide additional
forced-air cooling capacity in more extreme conditions.
Electrical power is converted into the much more desirable acoustical power by two robust, neodymium motor, 15-
inch woofers with 4-inch (100mm) voice coils. Neodymium magnets are lighter, and their higher intensity provides
higher eīš­iciency, so the result is a lighter and louder cabinet than those with ferrite drivers.
The MK3 features an all-new DSP. The comprehensive suite of processing includes high-pass and low-pass
filters as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible,
including thermal, excursion and clipping. The five levels of protection actively prevent overheating of the voice
coil, minimize long-term thermal compression and limit excursion. Because they operate in 5 diīš­erent modes,
the limiters are sophisticated enough to have a largely unnoticeable eīš­ect on the transient response and allow
the subwoofer to deliver peak output safely.
The new DSP features an Ethernet interface. This can be used to control the cabinets from a computer or to load
software or firmware updates. The Ethernet connectivity in conjunction with the DSP board allows signal to be
sent via Milan AVB. Firmware updates will provide access to this feature.
Within the software, multiple cabinets can be grouped together, allowing them to respond to commands
simultaneously. This permits the levels of multiple loudspeakers to be adjusted together and yet independently
from the levels of other groups of loudspeakers. In addition to individual and grouped level controls, presets
can be loaded and signal levels and temperatures can be monitored. Each cabinet includes a two-port switch
so multiple cabinets can be chained on the same data cable.
The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch of a
button with no need for a connected computer. The eight directly accessible presets are compatible with all the
presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs.


Product specificaties

Merk: BASSBOSS
Categorie: Niet gecategoriseerd
Model: SSP215-MK3

Heb je hulp nodig?

Als je hulp nodig hebt met BASSBOSS SSP215-MK3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd BASSBOSS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd