Aurora AS1023CD Handleiding

Aurora Papiervernietiger AS1023CD

Lees hieronder de 📖 handleiding in het Nederlandse voor Aurora AS1023CD (4 pagina's) in de categorie Papiervernietiger. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Aurora Electronics (UK) Ltd

Email: sales@aurora-ltd.co.uk

www.aurora-ltd.co.uk

Warranty

Your Aurora shredder is covered by a return to base warranty and in all instances should be returned

to your point of purchase for fault rectiﬁcation.

Aurora warrants all parts of the machine to be free from defects in materials and workmanship for a

period of 1 year from the date of the purchase by the original consumer. If any part is found to be

defective during the warranty period the sole and exclusive remedy will be the repair or replacement

at Aurora’s option and expense of the defective part.

Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential damages

attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited to the cost of the

repair/replacement of the unit under warranty.

The warranty shall be immediately invalidated if unauthorized repairs or modiﬁcations are made, if

the machine has been abused or mishandled, if the product has been re-sold, or if the product has not

been operated in accordance with the instructions contained in this document.

The warranty is in addition to and does not diminish the consumer’s statutory or legal rights.

User Manual for the AS1023CD Aurora Shredder

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE USING

Thank you for purchasing the AS1023CD Paper Shredder. This product is designed to shred paper and

small staples it will also accept small paper clips, credit cards and CD/DVD’s. It does not shred

adhesive labels, self-seal envelopes, transparencies, fabrics, glossy paper, newspaper, plastic (other

than credit cards), cardboard or continuous forms. Please note that using it for these purposes is likely

to cause damage and will invalidate your warranty. This paper shredder is not designed to shred large

volumes so please refer to the recommended usage capacity quoted below. You may ﬁnd paper

particles in the bin when ﬁrst opening the shredder this is a result of QC testing procedures.

Recommended Daily Usage = 50 passes per day. (5 minutes on/ 20 minutes oﬀ)

Assembly Instructions

CLIP FIRMLY SLIDE BIN

INTO PLACE INTO UNIT

CLIP FIRMLY

INTO PLACE

Safety Instructions

1. Before use inspect the shredder, mains cable and plug for damage or defects.

2. Locate the shredder away from heat and water sources.

3. Ensure the switch is set to ‘off’ before connecting to the mains.

4. Always keep ties, loose clothing, jewelry and long hair away from the shredder .

5. Keep children and pets away from the shredder.

6. Disconnect from the mains when not in use or when emptying or cleaning.

7. Do not insert ﬁngers or objects into the shredder at any time.

8. Never attempt to dismantle the shredder for any reason, please return to an authorized service agent

for repair or servicing.

9. Never dispose of ﬂammable chemicals or materials that have come into contact with ﬂammable

chemicals (for example nail polish, acetone and petroleum) in the shredder b . Never use flammable in

oils, petroleum based products or ﬂammable aerosols of any kind in the vicinity of the machine

including compressed air dusters.

Remove all packaging, shredder head and

castors.

Turn the lower casing upside down and insert

the four castors into the slots, pushing ﬁrmly

into place.

Fit the shredder head on top of the waste bin

and push down ﬁrmly to clip into place (there

should be no gap between the shredder head and

the casing).

If the shredder head is not seated correctly on

the casing the “Door Open” indicator will light

and the shredder will not operate, even if the bin

door is closed.

There is a safety cut out which is activated

when the door is open. The shredder will not

operate if the door is not closed correctly and

the “Door Open” indicator is lit.

The ShredSafe cover has 3 positions:

Position 1 Closed Only CD shredding is possible –

through the marked slot.

This prevents ﬁngers and objects from being put into

the shredder.

Position 2 Open, Normal Operation For shredding –

paper and credit cards.

The central position allows for normal shredding

operation.

Position 3 Fully open, safety power oﬀ - Shredder not

operational.

If ﬁngers or objects are pushed into the entry slot when

in position 2, then the ShredSafe cover will be pushed

open fully, cutting the power to the shredder and

preventing injury or damage.

The power indicator light will be oﬀ when in this

position, and the shredder will not operate until the

safety cover is returned to position2.

Operational Instructions

1. Set the switch to ‘Auto’, the shredder is now in stand by mode. –

2. Set the ShredSafe cover to position 2 (See the ShredSafe Feature section).

3. The shredder will start automatically when paper is fed into the paper entry slot.

4. Ensure paper is fed in using a straight paper path, avoid feeding paper at an angle as this will cause

the paper to curl and fold as it enters the shredder multiplying the number of sheets passing through

the blades and is likely to result in a jam.

5. Do not enter more than 10 sheets of 75gsm of paper at a time. If shredding a heavier weight of

paper the maximum sheet capacity will be reduced, as this is based on paper thickness.

The presence of staples/paperclips will reduce the maximum sheet capacity.

Shredding capacity is also aﬀected by temperature and humidity.

6. Do not operate continuously for more than 5 minutes.

7. Prolonged shredding will cause the unit to overheat and shut down. This is not a fault and indicates

the unit has reached its maximum temperature tolerance, turn the unit oﬀ at the mains and allow it to

cool down for 60 minutes before resuming normal operation.

8. If the amount of paper inserted is too much or is not fed in straight then the shredding speed will

slow or even stop. If this happens stop shredding and use the reverse function to clear the jam. Always

ensure the waste basket is not full before reversing.

9. To shred a credit card Set the ShredSafe cover to position 2 (see below). Insert the credit card in –

the centre of the entry slot as marked. You should only shred one credit card at a time. To destroy a

CD – Insert the CD into the slot towards the front of the shredder marked ‘Maximum 1 CD’, the CD

will be strip cut into several pieces. You should only destroy CD’s via the CD slot and only destroy

one CD at a time.

SHREDSAFE FEATURE

3 Position Safety Cover

CLOSED

OPEN

SAFETY

CUT OFF

Status Indicators

POWER OVERLOAD DOOR OPEN OVERHEAT

Power Illuminates when the power is on. ShredSafe ﬂap positions 1 and 2. –

Overload Illuminates when too much paper is fed into the feed slot. –

Door Open Illuminates when the waste bin door is open. The shredder will not operate with the door –

open.

Overheat Illuminates when the operational temperature is exceeded. Turn oﬀ at the mains and leave –

to cool down for 60 minutes then try again.

Maintenance

1. Empty the waste bin frequently.

2. Reversing the shredder often helps to clear a buildup of paper dust and particles, always ensure the

waste bin is not full before reversing.

FAQ & Troubleshooting

Problem 1 The shredder fails to operate –

Is the shredder connected at the mains and is the power turned on?

Is the shredder switch set to ‘auto’?

Is the ShredSafe cover in position 3 (fully open with the safety cut out operational)? - (set the

ShredSafe cover to position 2) See ShredSafe feature.

Is the door open indicator lit? (Shut the waste bin door) –

Is the shredder located correctly on top of the lower casing? (Press down ﬁrmly on the shredder –

head to ensure it is in the correct position)

Has the shredder over heated? (Turn oﬀ at the mains and leave to cool down for 60 minutes then try –

again.)

Has the shredder blown a fuse? (Turn oﬀ at the mains and try replacing the fuse in the mains plug.) –

Problem 2 The shredder will not stop working –

The shredder is designed to operate for a couple of seconds after paper has cleared the machine this –

is normal and helps clear paper through the cutting heads.

If the shredder continues to work after a shredding cycle and does not stop then this is either;

1.The waste b is full. You should empty the b or compact the shredded paper. in in

2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning the switch to

auto or by shredding some more paper. Always ensure the waste bin is not full before reversing.

3. Glue from envelopes or label s is obstructing the sensor. You should not shred gummed envelopes ’

or sticky labels, try cleaning and lubricating the shredder with Aurora SP1000 Lubrication and

sharpening sheets, see above.

Problem 3 The shredder has jammed whilst shredding –

Empty the waste bin and try reversing the unit to clear the jam.

If this does not work disconnect power, trim oﬀ paper above and below the jam, reconnect power and

try alternating between reverse and auto until the jam clears.

If at any point the shredder stops working during this process it has probably over heated and will

need to cool down for 60 minutes.

Please be careful not to exceed the maximum paper capacity and feed the paper in straight, please be

aware damage caused to the shredder by inserting too much paper or by failing to shred using a

straight paper path is classed as misuse and invalidates your warranty.

Never attempt to clear paper jams by inserting implements into the shredder or by opening the

unit.

3 It is not essential to oil an Aurora shredder .

however regular lubrication will extend the life of

your shredder, prevent an increase in noise and

help to keep the shredder in optimum working

condition. We recommend using the ‘Aurora

SP1000 Shredder Lubrication and Sharpening

sheets’ at least once a month to keep your

shredder blades lubricated and free from a

buildup of paper dust. The Aurora SP1000

sheets also contain a special grinding powder

that will keep your shredder blades sharp.

These are available from your supplier in packs

of 12.

Product specificaties

Merk:	Aurora
Categorie:	Papiervernietiger
Model:	AS1023CD
Kleur van het product:	Zwart, zilver
Gewicht:	7400 g
Geluidsniveau:	70 dB
Breedte verpakking:	360 mm
Diepte verpakking:	270 mm
Hoogte verpakking:	455 mm
Afmetingen verpakking (BxDxH):	360 x 270 x 455 mm
Reverse:	Ja
Oververhittingsbeveiliging:	Ja
Veiligheid:	ShredSafe
Afmetingen (B x D x H):	315 x 220 x 510 mm
Volume mand:	18 l
Werkbreedte:	220 mm
Vernietigt CD's:	Ja
Papier versnipperen:	Ja
Credit cards versnipperen:	Ja
Vernietigt tot grootte:	5 x 55 mm
Capaciteit documentvernietiger:	12 vel
Soort vernietiger:	Kruisversnippering
Verwerkt nietjes:	Ja
Vewerkt paperclips:	Ja
Snelheid documentvernietiger:	2000 mm/min
Beveiligingsniveau:	3
Gebruiksindicatie:	5 min
Autostop bij vastlopen:	Nee