Audix OM3 Handleiding

Audix Microfoon OM3

Lees hieronder de 📖 handleiding in het Nederlandse voor Audix OM3 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

OM3

OVERVIEW:

Designed, assembled and tested by Audix in the USA, the OM3 is a

dynamic vocal microphone used for a wide variety of live, studio and

broadcast applications. The OM3 is known for its clear and accurate

sound reproduction, resistance to feedback and ability to handle very

high sound pressure levels without distortion.

The OM3 is characterized with a tight and uniformly controlled

hypercardioid polar pattern which helps to isolate the vocals from the

rest of the instruments on stage. With a wide frequency range of 50 Hz

- 18 kHz, the OM3 employs a VLM™ (Very Low Mass) diaphragm for a

clean and natural sound with exceptional transient response.

The OM3 is naturally attenuated in the lower mid-bass frequencies in

order to reduce boominess and handling noise. This, in conjunction with

an extremely articulate mid-range, makes the OM3 an excellent choice

for PA systems of all sizes. The OM3 is well balanced, comfortable

to hold, durable and manufactured with high standards and tight

tolerances.

Roadworthy construction includes a precision die cast zinc alloy body,

black e-coat nish, laser etched model and serial number, steel mesh

grill, Switchcraft® XLR connector and heavy duty nylon clip.

FEATURES:

Clear, accurate vocal reproduction

Handles high SPL without distortion

Low handling noise

Provides exceptional gain before feedback

Provides excellent vocal isolation on stage

Dent resistant steel spring grill

5 year warranty

APPLICATIONS:

Lead or backing vocals

Live recording

Broadcast

Home studio - vocal and instrument

Sax, brass, guitar, dobro, flute, percussion, drums

SUPPLIED ACCESSORIES:

Heavy duty nylon mic clip (MC1)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

WS357 - External foam windscreen

CBL-20 - 20’ XLR-XLR low noise microphone cable

T50K - Low to high impedance matching transformer

MODEL VARIATIONS:

OM3-S - Same as above with On-Off switch

DYNAMIC VOCAL MICROPHONE

OM3

Dynamic Vocal

MC1 WS357 CBL-20 T50K

Transducer Type Dynamic

Frequency Response 50 Hz - 18 kHz

Polar Pattern Hypercardioid

Output Impedance 250 ohms

Sensitivity 1.7 mV / Pa @ 1k

Capsule Technology VLM Type B

Off Axis Rejection > 25 dB

Maximum SPL ≥144 dB

Power Requirements None

Connector Switchcraft® male

XLR connector

Polarity Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3 of output

XLR connector

Housing / Finish Zinc Alloy /

Black E-coat

Weight 307 g / 10.8 ounces

Length 176 mm / 6.9 inches

SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be of the dynamic type and the polar pattern of the microphone

shall be hypercardioid. The nominal output impedance shall be equal to 250 ohms at

1 kHz. The microphone shall have a sensitivity of 2.5 mV / Pa at 1 kHz and a sound

pressure level ≥144 dB. The microphone body shall be of zinc alloy and the grill cap

shall be steel wire mesh. The overall dimensions shall be 23 mm in diameter at the

base, 53 mm in diameter at the widest point on the grill and 176 mm in length. The

microphone shall be the Audix OM3.

OPERATION:

The OM3 is a low impedance microphone and should be plugged into the “mic level”

input of your console, mixer, or recording device. Please note that your microphone

does not require phantom power and will not be effected in any way by phantom

power should it be running simultaneously while the microphone is in operation. Avoid

plugging or unplugging the microphone from the PA system unless the channel is

muted or the volume of the system turned down. Failure to do so may result in a loud

“popping” noise which could seriously damage the speakers in the PA system.

USER TIPS:

The OM3 has a very tight pick-up pattern in order to help eliminate sound from other

instruments on stage from “bleeding” into the microphone. For best results, it is

important to sing directly into the mic at close proximity (within 2 inches).

When using oor monitors, position the microphone so that it is parallel to the oor.

When using multiple microphones on a live performance stage, allow a distance of 2-3

feet between mics to avoid phase issues.

*Further miking techniques may be found on our website at www.audixusa.com

www.audixusa.com Call: 503-682-6933 Fax: 503-682-7114

Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070

SERVICE AND WARRANTY:

This microphone is under warranty for

a period of 5 years from any and all

manufacturing defects. Should your

microphone fail in any way, please con-

tact the Audix Service department at

503-682-6933. A Return Authorization

number is required before returning

any products.

CARE AND MAINTENANCE:

The OM3 is manufactured to exacting specs

with roadworthy construction. However, the

capsule is highly sensitive and should be

handled with care. Avoid extreme temperatures

and be sure to store your microphone in the

pouch provided when not in use. Moisture of

any kind can adversely affect the sound and

performance of your microphone.

FREQUENCY / POLARS:

To register your

microphone, please visit

www.audixusa.com

***All specications subject to change without notice.

DIMENSIONS (mm):

OM3

Product specificaties

Merk:	Audix
Categorie:	Microfoon
Model:	OM3
Kleur van het product:	Zwart
Diepte:	176 mm
Hoogte:	53 mm
Soort:	Microfoon voor podiumpresentaties
Connectiviteitstechnologie:	Bedraad
Ruisonderdrukking:	Ja
Impedantie:	250 Ohm
Aansluiting:	XLR-3
Compatibele producten:	MC1\r\nWS357\r\nCBL-20\r\nT50K
Microphone direction type:	Cardioïde
Frequentie microfoon:	50 - 18000 Hz
XLR out:	Ja
Diepte (imperiaal):	6.9 "
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	307 g
Output impedance:	250 Ohm
Afmetingen microfoon (DxH):	176 x 53 mm