Audix Micro-D Handleiding

Audix Microfoon Micro-D

Lees hieronder de đź“– handleiding in het Nederlandse voor Audix Micro-D (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Micro-D
OVERVIEW:
Designed, assembled and tested by Audix in the USA, the Micro-D is
a miniaturized condenser microphone used for professional stage and
studio applications. The Micro-D, known for its clarity, excellent transient
response, resistance to feedback, SPL handling and ease of operation,
is primarily aimed for miking drums and percussion instruments.
The Micro-D is characterized with a uniformly controlled hypercardioid
polar pattern, provides excellent isolation and feedback control on stage
as well as natural sound reproduction at very close distances.
With a smooth and accurate response over a frequency range of 40 Hz
- 20 kHz, the Micro-D is lightweight, compact and simple to use. Housed
in an aluminum ring and isolated by means of a rubber shockmount
system, the Micro-D comes with the DVICE-MICRO mount for drums or
the DCLAMP-MICRO mount for hand percussion (Micro-HP). A number
of optional accessories are available which allow the Micro-D to be used
on a mic stand or cymbal stand for a wider variety of applications.
The Micro-D operates on phantom voltage of 9 - 52 Volts and is supplied
with a phantom power adapter, 6 ft integrated mic cable and carrying
pouch.
FEATURES:
Small, lightweight, low profile
High SPL handling
Miniaturized integrated preamp circuitry
Excellent for close miking
APPLICATIONS:
Drums
Hand percussion (Micro-HP)
Cymbals, percussion toys
SUPPLIED ACCESSORIES:
Gooseneck mounting clip (DVICE-MICRO)
Cylindrical phantom power supply adapter (APS-910)
External foam windscreen (WS20)
6’ attached shielded cable with mini XLR-f connector
Carrying pouch (P1)
OPTIONAL ACCESSORIES:
MC-MICRO - Mic stand adapter
SMT-MICRO - Mic stand adapter with shockmount ring
DFLEX-MICRO - Wide jaw clip for use with rims mounts and cymbal stands
APS-911 - Battery/phantom preamplifier with on/off switch and roll-off
DCLAMP-MICRO - Gooseneck lug mount clamp for drums & percussion
MODEL VARIATIONS:
Micro-HP - Cardiod version with DCLAMP-MICRO for use with hand percussion instruments
INSTRUMENT CONDENSER MICROPHONE
Instrument Condenser
MICRO-D
DVICE-MICRO SMT-MICRO MC-MICRO APS-910 DFLEX-MICRO
SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:
The microphone shall be of the condenser type with a modular threaded capsule. The microphone
shall be available in a hypercardioid polar pattern and shall have a 6’ cable terminating in a mini-
XLR female connector. The microphone shall be provided with a remote cylindrical phantom power
adapter that will allow the microphone to operate between 9 Volts and 52 Volts phantom power.
The microphone shall have a sensitivity of 5 mV / Pa and a nominal impedance of 250 ohms at
1 kHz. The microphone shall have a maximum SPL level of 140 dB at 0.5% THD and shall be ≥
machined out of brass with a length of 30 mm and a capsule diameter of 12 mm. The microphone
shall be the Audix Micro-D.
OPERATION AND MAINTENANCE:
The Micro-D is a low impedance microphone and should be plugged into a “mic level” input on your
console, mixer or recording device. The Micro-D requires phantom power and will NOT operate
without phantom power voltage (minimum of 9 - 48 Volts) which is available on most professional
mic preamps and mixing devices. If phantom power is not available on your equipment, you may
use the Audix APS-911 which is an optional accessory that allows for battery operation. Avoid
plugging or unplugging the microphone from a PA system unless the channel is muted or the
volume of the system turned down. Failure to do so may result in a loud “popping” noise which
could seriously damage the speakers in the PA system.
APS-910 phantom power adapter: Note that the mini-XLRf connector at the end of the Micro-D
mic cable plugs into mini-XLRm side of the APS-910 power adapter. From there, plug a standard
XLR-XLR microphone cable to complete the connection from the APS-910 to the mixing board.
USER TIPS:
Drums: The Micro-D is designed to clip on the rim of a drum (see photo on front page). The
provided clip (DVICE) is spring loaded. The inside slider portion of the clip should be attached to
the bottom part of the rim rst and the clip lifted up and over the top rim for a tight tension t. You
can adjust the position of the gooseneck by means of the lower thumb screw on the DVICE. The
mic itself is generally positioned 2-3 inches o the drum head and slightly inside the rim pointing
towards the head.
Percussion: (Model Micro-DHP) Simply attach the threaded mount to the lug of the percussion
instrument. Adjust the height of the gooseneck by means of the lower thumbscrew. The mic can be
positioned 2-3 inches above the head of the instrument and aimed towards the center of the head.
*Further miking techniques can be found on our website at www.audisusa.com
FREQUENCY / POLARS:
DIMENSIONS (mm):
Transducer Type Pre-polarized Condenser
Frequency Response 40 Hz - 20 kHz
Polar Pattern Hypercardioid
Output Impedance 250 ohms
Sensitivity 5 mV / Pa @ 1k
Signal/Noise Ratio (A-weighted) 70 dB
Equivalent Noise Level (A-weighted) 24 dB
Maximum SPL @ .5% THD ≥140 dB
Power Requirements 9 – 52 V phantom
Connector 3 pin gold plated male
XLR connector
Polarity Positive pressure on
diaphragm produces
positive voltage on pin
2 relative to pin 3
Housing / Finish Machined Brass/
Gooseneck Flexible Steel
Weight 47 g / 2 ounces
Length 30 mm / 1.14 inches
MICRO-D
SERVICE AND WARRANTY:
This microphone is under warranty for a period of 3 years from
any and all manufacturing defects. Should your microphone
fail in any way, please contact the Audix Service department
at 503-682-6933. A Return Authorization number is required
before returning any products.
CARE AND MAINTENANCE:
The MICRO-D is manufactured to exacting specs with roadworthy
construction. However, the capsule is highly sensitive and should be handled
with care. Avoid extreme temperatures and be sure to store your microphone
in the pouch provided when not in use. Moisture of any kind can adversely
aect the sound and performance of your microphone.
***All specications subject to change without notice.
www.audixusa.com
503-682-6933 Fax: 503-682-7114
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
AUD IX WA RRA NTY REG IST RATI ON FOR M
Please Check all that apply:
Male Female
Age: Occupation: Primary Instruments: Product to be used for:
18 or Under Musician Vocal Pro live sound
19-25 Producer Guitar / Bass Pro recording
26-35 Sound Eng. Drums Home recording
36-45 Radio/TV Keyboard Rehearsal
46-55 Production Brass Installation
55 + Other _______ Woodwinds School
Strings House of Worship
How did you hear about Audix? Other ___________ Other ___________
Magazine Ad Online Ad
On-line Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No
Please register your product online at www.audixusa.com or mail this form to:
Audix Microphones P.O. Box 4010 Wilsonville, OR 97070
Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________
1.1


Product specificaties

Merk: Audix
Categorie: Microfoon
Model: Micro-D

Heb je hulp nodig?

Als je hulp nodig hebt met Audix Micro-D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Audix

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon