AudioControl Epic Five Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor AudioControl Epic Five (16 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
FIVE CHANNEL AMPLIFIER
Quick Start Guide
Features
ā€¢ Compact High-Power Class D Ampliļ¬er
ā€¢ High-Current Design
ā€¢ 4 x 75 Watts + 1 x 300 Watts @ 4 ohms
ā€¢ 4 x 150 Watts + 1 x 500 Watts @ 2 ohms
ā€¢ 1 x 700 Watts @ 1 ohm
ā€¢ 2 x 300 Watts @ 4 ohms Bridged
ā€¢ Smart Auto-Reset Protection Circuit
ā€¢ 12 dB/octave Linkwitz-Riley Variable HP/LP Filters
ā€¢ 12 dB/octave Variable Subsonic Filter
ā€¢ Solid Power/Speaker Terminals with Hex Screws
ā€¢ You're not ready for this
2
Quick Start Guide
FIVE CHANNEL AMPLIFIER
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturerā€™s instructions.
8. Do not install near any heat sources such as muļ¬„ers, silencers, exhaust
pipes, or other apparatus (including ampliļ¬ers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualiļ¬ed
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12V and Ground wiring of suļ¬ƒcient size to ensure adequate
current to the ampliļ¬er.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories speciļ¬ed by the manufacturer.
13. Refer all servicing to qualiļ¬ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
input terminals are damaged or objects have fallen into the apparatus,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered oļ¬€.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ļ¬‚ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
ā€œdangerous voltageā€ within the productā€™s enclosure, that may be of
suļ¬ƒcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do
not disassemble the apparatus, other than to
remove the top panel to access the controls.
There are no user-serviceable parts inside.
Refer servicing to qualiļ¬ed personnel.
Recycling notice: If the time comes and this apparatus has fulļ¬lled
its destiny, do not throw it out into the trash. It has to be carefully
recycled for the good of mankind, by a facility specially equipped
for the safe recycling of electronic apparatii. Please contact your
local or state recycling leaders for assistance in locating a suitable
nearby recycling facility. Or, contact us and we might be able to
repair it for you.
Important Safety Instructions
3
1. Ground Terminal ā€“ This screw terminal connects to a clean, solid
ground in the vehicle. Use the shortest length possible of quality
insulated wire of the recommended wire gauge (see speciļ¬cations).
2. Remote Power Input Wire ā€“ This wire connects to the 12V remote
trigger output of some head units and controls the on/oļ¬€ state of
the ampliļ¬er.
3. Power Input Terminal +12V ā€“ This screw terminal connects to
the +12V binding post of the vehicle battery. Use quality insulated
wire of the same gauge used for the Ground connection.
4. Speaker Output ā€“ Connect these speaker terminals to your
speakers using quality insulated wiring of the recommended wire
gauge (see speciļ¬cations). Make sure the speaker impedance
does not dip below 2 ohms, or 4 ohms in bridged mono mode.
5. Subwoofer Output ā€“ Connect these terminals to your subwoofer
using quality insulated wiring of the recommended wire gauge
(see speciļ¬cations). Make sure the subwoofer impedance does not
dip below 1 ohm.
Connections & Control Panel Features
q w e r t


Product specificaties

Merk: AudioControl
Categorie: Receiver
Model: Epic Five

Heb je hulp nodig?

Als je hulp nodig hebt met AudioControl Epic Five stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver AudioControl

Handleiding Receiver

Nieuwste handleidingen voor Receiver