AudioControl ACX-600.1 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor AudioControl ACX-600.1 (13 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 121 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
COMPACT HIGH POWER ALL-WEATHER MONO AMPLIFIER
Quick Start Guide
Features
ā€¢ Compact High Power Mono Subwoofer Ampliļ¬er
ā€¢ High Current Design
ā€¢ 1x 350 watts @ 4 Ohms
ā€¢ 1 x 600 Watts @ 2 Ohms
ā€¢ 12 dB/Octave Linkwitz-Riley Alignment Crossover
ā€¢ GTOā„¢ Signal Sense (Great Turn On)
ā€¢ 2 RCA Inputs - switchable for Low and High Level signals
ā€¢ Optional wired ACR-1 Remote Control for Output Level
ā€¢ All-weather rated - IPX6 rated!
ā€¢ Cage-free op-amps
ACX-600.1
2
ACX-600.1
Quick Start Guide
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturerā€™s instructions.
8. Do not install near any heat sources such as muļ¬„ers, silencers, exhaust
pipes, or other apparatus (including ampliļ¬ers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualiļ¬ed
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12V and Ground wiring of suļ¬ƒcient size to ensure adequate
current to the ampliļ¬er. For the ACX-600.1 this means 8 gauge wire or
thicker.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories speciļ¬ed by the manufacturer.
13. Refer all servicing to qualiļ¬ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
input terminals are damaged or objects have fallen into the apparatus,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered oļ¬€.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ļ¬‚ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
ā€œdangerous voltageā€ within the productā€™s enclosure, that may be of
suļ¬ƒcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do
not disassemble the apparatus, other than to
remove the top panel to access the controls.
There are no user-serviceable parts inside.
Refer servicing to qualiļ¬ed personnel.
Recycling notice: If the time comes and this apparatus has fulļ¬lled
its destiny, do not throw it out into the trash. It has to be carefully
recycled for the good of mankind, by a facility specially equipped
for the safe recycling of electronic apparatii. Please contact your
local or state recycling leaders for assistance in locating a suitable
nearby recycling facility. Or, contact us and we might be able to
repair it for you.
Important Safety Instructions
3
1. Speaker Output ā€“ Connect these wires to your subwoofer using
the included water resistant harness. Speaker wire may then be
crimped or soldered onto the bare leads. Use a decent sized wire
gauge as this baby is powerful!
2. Power Input Terminal +12V & Ground ā€“ Connect these wires
to the +12V and Negative binding posts of the vehicle battery
via one of two included harness options. You may use either the
included water resistant harness, or the included harness kit to
terminate your own custom-length water-resistant harness. Use
quality insulated wiring of the recommended wire gauge, such as
wire gauge 8 or thicker.
3. Remote Power Input Wire ā€“ This wire connects to the 12V remote
trigger output of some head units and controls the on/oļ¬€ state of
the ampliļ¬er. Alternatively, you can use the GTOā„¢ feature of the
ampliļ¬er so it will turn on when an speaker level signal is detected
at the RCA inputs.
Connections & Control Panel Features
123


Product specificaties

Merk: AudioControl
Categorie: Receiver
Model: ACX-600.1

Heb je hulp nodig?

Als je hulp nodig hebt met AudioControl ACX-600.1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver AudioControl

Handleiding Receiver

Nieuwste handleidingen voor Receiver