Audio-Technica ATW-CHG2 Handleiding

Audio-Technica Niet gecategoriseerd ATW-CHG2

Lees hieronder de đź“– handleiding in het Nederlandse voor Audio-Technica ATW-CHG2 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
ATW-CHG2
Two-Bay Recharging Station
For use with 2000 Series
wireless transmitters:
ATW-T210a UniPak® Transmitter
AT W-T220a Handheld Transmitter
Audio-Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 USA +1 (330) 686-2600
Audio-Technica Limited Old Lane, Leeds LS11 8AG England +44 (0) 113 277 1441
Audio-Technica (Greater China) Limited Unit K, 9/F., Kaiser Est. (Ph.2) 51 Man Yue St. Kowloon, HK. +852-2356-9268
Audio-Technica (S.E.A.) Pte. Ltd.
No 1 Ubi View, #01-14 Focus One, Singapore 408555 +65-6749-5686
Audio-Technica Corporation 2206, Naruse Machida, Tokyo Japan
©2010 Audio-Technica U.S., Inc. audio-technica.com
P52205 P# 2323-04430
To reduce the environmental impact of a multi-language printed document, product information
is available online at www.audio-technica.com in a selection of languages.
An de réduire l’impact sur l’environnement de l’impression de plusieurs, les informations
concernant les produits sont disponibles sur le site www.audio-technica.com dans une large
sélection de langue.
Para reducir el impacto al medioambiente, y reducir la producciĂłn de documentos en varios
leguajes, información de nuestros productos están disponibles en nuestra página del Internet:
www.audio-technica.com.
Para reduzir o impacto ecológico de um documento impresso de várias linguas, a Audio-Technica
providência as informações dos seus produtos em diversas linguas na www.audio-technica.com.
Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le
informazioni sui prodotti sono disponibili online in diverse lingue sul sito www.audio-technica.com.
Der Umwelt zuliebe î‚źnden Sie die Produktinformationen in deutscher Sprache und weiteren
Sprachen auf unserer Homepage: www.audio-technica.com.
Om de gevolgen van een gedrukte meertalige handleiding op het milieu te verkleinen, is
productinformatie in verschillende talen “on-line” beschikbaar op: www.audio-technica.com.
DANGER
This charger is designed only for Ni-MH rechargeable batteries.
To avoid personal injury and damage, do not attempt to charge alkaline
batteries or any other rechargeable batteries besides Ni-MH.
WARNING
• To prevent re or shock hazard, do not expose this product to drips
or splashes.
• To prevent re, do not place any naked ame sources (such as lighted
candles) on the product.
• To prevent re, do not cover the ventilation of product with newspaper,
tablecloths, curtains, etc.
• Do not install this product in a conned space such as a bookcase
or similar unit.
• Do not open the cover. No user serviceable parts inside.
• Do not place any objects lled with liquids, such as vases, on
the product.
CAUTION
• Do not use the charger in extremely cold or hot conditions.
• Keep the charger out of reach of small children.
• Danger of explosion if the wrong type of batteries are used.
• The battery rating label is on the bottom of the apparatus.
• Replace batteries only with the same or equivalent type.
• The charger should be located close enough to the AC outlet so that
you can easily grasp the AC adapter at anytime. In case of emergency,
disconnect the AC adapter quickly.
• Do not expose batteries or charger to excessive heat such as direct
sunlight, î‚źre or the like.
RECyClING Of NI-MH bATTERIEs
• Do not dispose the batteries as unsorted municipal waste; use separate
collection facilities.
• Contact your local government for information regarding the collection
systems available.
CANADA ONly
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme á la norme NMB-003 du Canada.
OpERATING pRECAUTIONs
Battery Charger
• It is not abnormal for the charger and the rechargeable batteries to
become warm during recharging.
Batteries
• For best performance and optimal safety, use only the included
2000 mAh Ni-MH or similar type batteries.
• It is often necessary to cycle new or deeply discharged Ni-MH batteries
two or three times before they reach peak performance. To cycle the
batteries, simply use them as you normally would and then recharge them.
COMplIANCE WITH fCC RUlEs (UsA ONly)
This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
fCC WARNING
You are cautioned that any changes or modiî‚źcations not expressly approved
in this manual could void your authority to operate this equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ATW-CHG2 Features
• Batteries are charged within the transmitters.
• Versatile unit charges ATW-T220a handheld transmitters and/or
ATW-T210a UniPak® transmitters (in any combination).
• Built-in safety feature monitors cell voltage and automatically turns
off the unit if problems are detected.
• Automatic shut-off if alkaline (non-rechargeable) batteries
are installed.
• Automatic shut-off if damaged batteries are installed.
• Maintenance charging prevents battery self-discharge until the
transmitter is removed from charger.
• Includes Ni-MH rechargeable batteries – 2 x AA 2000 mAh
LED Status Indication
Charger indicator Charging Transmitter
status status status
Off Power off Transmitter not in unit
Red light Charging* Transmitter in unit
Red î‚°ashing Charging error Transmitter in unit
(Charging is stopped)
Off Charging is î‚źnished Transmitter in unit
(Still maintenance charging)
Note: Red î‚‚ashing light (charging error) is caused by use of alkaline
(non-rechargeable) or damaged battery.
*Note: If a transmitter with fully charged batteries is placed in the
charger, the red light will remain on for a minimum of 3 hours, even
though the batteries are fully charged.
Speciî‚’cations*
Input Rating 12V DC, 320 mA (maximum)
Output Rating 3.2V DC, 320 mA x2
Charging Time Approx. 10 hours (2000 mAh Ni-MH)
Operating 0~+40Âş C
Temperature
Dimensions Approx. 131.0 mm (5.16") W x
130.0 mm (5.12") D x 105.0 mm (4.13") H
Weight Approx. 40 g (1.4 oz)
*Speciî‚źcations are subject to change without notice.
How to charge
1. Connect the power cord.
2. Set the transmitter’s power switch to the off position.
(Note: The transmitter’s power is automatically turned off if the
transmitter is set in the charger with its power switch on; in this
case, the transmitter will resume operation when it is removed
from the charger.)
3. Install the Ni-MH AA batteries in the transmitter, observing correct
polarity as marked inside the transmitter. For installation instructions,
see the 2000 Series installation & operation manual.
4. Insert the transmitter into the charger with transmitter charging
contacts facing toward the charger’s contact pins.
5. Power is supplied to the charging bay when the transmitter is set
into the unit; at this point the red indicator of each port lights.
(Note: If the red indicator does not light, poor contact may be
the cause; set the transmitter in the charger again.)
6. When the charge is completed, the red indicator is turned off.
(Note: Maximum charging time is about ten hours.)
7. The unit keeps charging with ultra-low current (maintenance charge)
until the transmitter is removed from the charger.

Product specificaties

Merk: Audio-Technica
Categorie: Niet gecategoriseerd
Model: ATW-CHG2

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica ATW-CHG2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Audio-Technica

Audio-Technica

Audio-Technica AT-LT10 Handleiding

26 September 2024
Audio-Technica

Audio-Technica ATN3600LC Handleiding

31 Augustus 2024
Audio-Technica

Audio-Technica ATN3600LE Handleiding

31 Augustus 2024
Audio-Technica

Audio-Technica AT-HRD100 Handleiding

28 Juni 2024
Audio-Technica

Audio-Technica AT-HRD5 Handleiding

28 Juni 2024
Audio-Technica

Audio-Technica AT-HRD300 Handleiding

28 Juni 2024
Audio-Technica

Audio-Technica AT-HRP5 Handleiding

28 Juni 2024
Audio-Technica

Audio-Technica AT-HRD500 Handleiding

28 Juni 2024
Audio-Technica

Audio-Technica AT-DL5HD Handleiding

28 Juni 2024
Audio-Technica

Audio-Technica AT-DL3i Handleiding

28 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Xblitz

Xblitz R8 Power Charge Handleiding

3 December 2024
Xblitz

Xblitz R4 Power Handleiding

3 December 2024
Franke

Franke Urban UBG 610-78 Handleiding

3 December 2024
Franke

Franke ANX211RHD Handleiding

3 December 2024
Franke

Franke ANX220 Handleiding

3 December 2024
Dell

Dell NX3330 Handleiding

3 December 2024
Dell

Dell PowerConnect B-DCX-4s Handleiding

3 December 2024
Hager

Hager AKB83000701 Handleiding

3 December 2024
Hager

Hager AKB81500402 Handleiding

3 December 2024
Hager

Hager AKBA1500401V Handleiding

3 December 2024