Audio-Technica ATW-A49 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica ATW-A49 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
UHF WIDEBAND LPDA ANTENNAS, 440-900 MHz
Audio-Technica ATW-A49 UHF wideband LPDA (Log Periodic Dipole
Array) antennas provide enhanced signal pickup for UHF wireless systems
operating over 440-900 MHz, a remarkable 2-to-1 frequency range. This
bandwidth includes all UHF TV channels. Supplied in pairs, these directional
antennas are ideal for extending the operating range and reliability of
diversity UHF wireless systems. They also eliminate the need for multiple
frequency-specic antennas.
The ATW-A49 is designed for applications requiring increased distance
between the transmitter and the receiver - as in stadiums, concert tour
venues, theater and large performance areas, or any area where line-of-
sight may be obstructed. This ruggedly constructed paddle-style antenna is
equally suited for installed and portable applications.
The antennas are compatible with virtually all UHF wireless receivers
and provide a directional coverage pattern with a typical beamwidth of
90 degrees. They offer approximately 6 dB of RF gain improvement over
standard receiver whip antennas. Antenna impedance is 50 ohms.
The antennas are constructed of industrial-grade copper-clad epoxy
berglass. This heavy-duty, durable construction is engineered to resist the
effects of corrosion, UV degradation and vibration, providing long life and
stable performance under difcult operating conditions. High-quality, low-loss
BNC connectors are positioned to minimize RF cable strain. The antennas
are supplied completely assembled.
Location
For best performance, the antennas should be mounted:
- Above head-height,
- In direct line-of-sight to the likely transmitter location(s).
- At least 1m away from eash other, and
- At least 1m away from any large metal objects or sources of interference.
In addition, the length of RF cable run to the receiver should be minimized.
Some experimentation with antenna positioning may be r equired to
determine the best locations under typical conditions.
Important: While the antennas themselves are weather resistant, outdoor
use should be temporary only and under dry conditions. Any moisture or
corrosion in BNC cable connectors or associated cables can greatly affect
RF performance at these frequencies.
FORM No. ATGC-L0061-06-E
Machida Tokyo Japan
SPECIFICATIONS
ANTENNA TYPE Log Periodic Dipole Array (LPDA)
OPERATING BANDWIDTH 440 MHz - 900 MHz
GAIN 6 dB typical
IMPEDANCE 50 ohms typical
VSWR ≤ 1.7:1
POLAR PATTERN Elliptical, 90° acceptance, typical
POLARZATION Vertical (when mounted vertically)
NUNBER OF ELEMENTS 9
TERMINATION TYPE Fixed right-angle BNC female
Connector is positioned to minimize
cable strain
WEIGHT 326 g
DIMENSIONS 268 mm L x 285 mm H x 25 mm D
MATERIAL Copper-clad epoxy berglass
FINISH Black matte
MOUNTING °⅝”-27 thread; adaptor can swivel 90
Optional Accessories:
7.5RG58BNC RG58-type antenna cable, 7.5m long, terminated with
BNC connectors.
20RG8BNC RG8-type antenna cable, 20m long, terminated with
BNC connectors.
30RG8BNC RG8-type antenna cable, 30m long, terminated with
BNC connectors.
50RG8BNC RG8-type antenna cable, 50m long, terminated with
BNC connectors.
ATW-49CB 2-way active antenna broadband combiner kit.
ATW-49SP 2-way active antenna broadband splitter kit.
ATW-B80 UHF in-line +3dB / +10dB ampliers.
Mounting
The ATW-A49 mounts to a ⅝”-27 thread tting. The antenna mount is designed
to allow for vertical tilt adjustment through a 90° range. Horizontal adjustment
is accomplished by rotating the antenna in the mounting fitting. For portable
applications, the antenna may be installed on a standard -27 t hread
microphone stand.
Connections
After the antennas have been installed, connect them to the antenna inputs of
either a wireless receiver or an antenna distribution system. Use RG58-type
cable for cable lengths of up to 7.5m. For cable lengths greater than 7.5m, RG8-
type low-loss RF cable is recommended. RG8-type cable lengths over 50m may
cause significant signal loss. Because cable requirements vary considerably
from one installation to another, RF cable are not included. High-quality, pre-
terminated RF cables available from Audio-Technica will be found listed on the
“Optional Accessories.”
FORM No. ATGC-L0061-06-C
Machida Tokyo Japan
UHF宽带对数周期偶极阵(LPDA)线, 440-900 MHz
ATW-A49 LPDA( -Log Periodic Dipole Array)宽带 对数周期偶极阵
天线,为 频段 的无线系统提供 合 式的高增益UHF 440-900MHz 2 1
的接收能力,而接收频带已覆盖整个 电视通道。对装式的定UHF
向天线设计,为分集式 无线系统提供理想的远距离和稳定的UHF
接收表现。另外,亦可作多通道无线系统的共用天线。
ATW-A49是设计于需要远距离接收和发射的应用,如体育场馆、
演唱会、剧场、及大型演出场所;或一些会阻挡视线及接收的环
境。另外,天线可轻易稳固的安装;同时亦可容易地拆除,方便
携带。
该天线差不多可使用于所有 频段的无线接收机中,并提供UHF 90°
角度固定频带中的定向覆盖接收。比较接收机附带的标准天线,
ATW-A49可提供在50姆阻抗时约6dB的射频信号提升
ATW-A49天线是以工业级标准的玻离钢及铜膜镀层构造,提供耐
用、防腐蚀、抗紫外线、防震及轻型的特点,在不同环境下可作
长时间及稳定的表现。而线整合的 端子提供了高质量及低BNC
阻抗的特性,并能减低连接线的拉力。
安装位
为提供最好的表现,天线应安装于
- 一般
- 可直接看到发射机而无障碍物的位置。
- 旁边的物件应与天线有最小1米的距离。
- 与大型金的信最小1米的距离。
另外,连接到接收机的同轴电缆应尽量减短;而在许可情况下,
可尝试把天线放置在不同位置以测试出最好的接收效果。
注意天线会受到天气环境的影响,在户外使用时,请把天气放
置在干固的位置,湿气及雨水会影响 端子及电缆的表现及BNC
全。
技术指标
天线类型 极阵(LPDA)线
工作频带 440 MHz - 900 MHz
增益 6 dB 典型
阻抗 50 欧姆 典型
电压驻波比 ≤ 1.7 :1
指向性 椭圆形 90° 典型
指向极性 垂直 (于垂直安装)
导波器段数 9
连接端子 BNC母座,接应设
置在最小拉力位置。
重量 326
外形尺寸 268mm x 285mm x 25mm
构造 玻离钢及铜膜镀层
涂层 暗黑色
支架 ⅝”-27 支架接头,90°转向座
选择配件:
7.5RG58BNC RG58
同轴电缆,7.5 米低,两端接上
BNC端子
20RG8BNC RG8
同轴电缆,20 米长,两端接上BNC
端子。
30RG8BNC RG8 同轴电缆,30 米长,两端接上BNC
端子。
50RG8BNC RG8 同轴电缆,50 米长,两端接上BNC
端子。
ATW-49CB 有源天线汇合器套件。
ATW-49SP 有源天线分线器套件。
ATW-B80 有源天线放大器。
支架
ATW-A49配置有-27支架接头可作90°水平转向亦可水平
。在活动式应用时,可天线安装-27 话筒支架
上。
连接端
在天线安装完成后,可天线连接到接收机或天线分配器的天线输入
端上。一般RG58型号同轴电缆最长可作7.5米距离连接,如高于此长
度,请使用RG8型号同轴电缆,一般RG8型号同轴电缆最长可作50米距
离连。由于每个使用的环境不同,天线不会附带连接电缆,有关可选
配的连接电缆资料,请查看上方的“选择配件”。


Product specificaties

Merk: Audio-Technica
Categorie: Niet gecategoriseerd
Model: ATW-A49

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica ATW-A49 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Audio-Technica

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024