Audio-Technica ATW-2000c Handleiding

Audio-Technica Niet gecategoriseerd ATW-2000c

Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica ATW-2000c (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

2000 Series

Frequency-agile True Diversity UHF Wireless System

Installation and Operation

2000 Series Installation and Operation

This device complies with part 15 of the FCC Rules. Operation is

subject to the condition that this device does not cause harmful

interference.

This device complies with INDUSTRY CANADA R.S.S. 210, en

conformité avec IC: RSS-210/CNR210. Operation is subject to the

following conditions: 1) This device may not cause harmful interference

and 2) this device must accept any interference received, including

interference which may cause undesired operation.

Hereby Audio-Technica declares that this device complies with the

essential requirements and other relevant provisions of the R&TTE

directive 1999/5/EC

FCC Notice

Caution

You are cautioned that any changes or modications not expressly

approved in this manual could void your authority to operate this

equipment.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

A copy of the user’s manual and DoC can be found at

www.audio-technica.com.

CAUTION! Electrical shock can result from removal of the receiver

cover. Refer servicing to qualied service personnel. No user-

serviceable parts inside.

• To prevent re or shock hazard, do not expose this appliance to rain

or moisture.

• To prevent re, do not place any naked ame sources (such as

lighted candles) on the apparatus.

• To prevent re, do not cover the ventilation of the apparatus with

newspaper, tablecloths, curtains etc.

• Do not expose this apparatus to drips or splashes.

• Do not place any objects lled with liquids, such as vases, on the

apparatus.

• Do not install this apparatus in a conned space such as a bookcase

or similar unit.

• The apparatus should be located close enough to the AC outlet

so that you can easily grasp the AC adapter at any time. In case of

emergency, disconnect the AC adapter quickly.

• Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

• Always consider environmental issues and follow your local

regulations when disposing of batteries. Do not expose batteries

to excessive heat.

The circuits inside the receiver and transmitter have been precisely

adjusted for optimum performance and compliance with federal

regulations. Do not attempt to open the receiver or transmitter.

To do so will void the warranty, and may cause improper operation.

Notice to individuals with implanted cardiac pacemakers

or AICD devices:

Any source of RF (radio frequency) energy interfere with normal may

functioning of the implanted device. All wireless microphones have

low-power transmitters (less than 0.05 watts output) which are unlikely

to cause difculty, especially if they are at least a few inches away.

However, since a “body-pack” mic transmitter typically is placed against

the body, we suggest attaching it at the belt, rather than in a shirt

pocket where it may be immediately adjacent to the medical device.

Note also that any medical-device disruption will cease when the RF

transmitting source is turned off. Please contact your physician or

medical-device provider if you have any questions, or experience any

problems with the use of this or any other RF equipment.

RF Interference

Please note that wireless frequencies are shared with other radio

services. According to Federal Communications Commission

regulations, “Wireless microphone operations are unprotected

from interference from other licensed operations in the band. If any

interference is received by any Government or non Government

operation, the wireless microphone must cease operation...” If you

need assistance with operation or frequency selection, please contact

your dealer or Audio-Technica. Extensive wireless information also is

available at www.audio-technica.com.

Thank you for choosing an Audio-Technica professional wireless

system. You have joined thousands of other satised customers who

have chosen our products because of their quality, performance and

reliability. This Audio-Technica wireless microphone system is the

successful result of years of design and manufacturing experience.

Each 2000 Series wireless system provides a choice of 10 PLL

synthesized UHF frequencies in one of ve UHF frequency ranges,

available for exible performance in a wide variety of regions

worldwide:

Frequency Range

Band D 656.125 – 678.500 MHz

Band E 795.500 – 805.875 MHz

Band F 854.900 – 864.900 MHz

Band G 722.125 – 744.500 MHz

Band I 487.125 – 506.500 MHz

Band U 606.500 – 629.900 MHz

The band letter reference at the end of 2000 Series Stock Numbers

indicates what band system/component operates in. For simplicity,

model numbers used throughout this manual will reference only the

basic model number without the band indications.

Each wireless system includes a receiver and either a body-pack or

handheld transmitter. UniPak® body-pack transmitter systems include

accessory microphones for particular applications. All A-T Wireless

Essentials® microphones and cables, available separately, are pre-

terminated for use with any Audio-Technica 2000 Series wireless

system.

The ATW-R2100b receiver features true diversity reception. Two

antennas feed two completely independent RF sections on the same

frequency; automatic logic circuitry continuously compares and

selects the superior received signal, providing better sound quality and

reducing the possibility of interference and dropouts. The receiver also

offers a switchable output attenuator to reduce the level of the output

signal by 12 dB for exible use with a variety of system congurations.

2000 Series Installation and Operation

Switchable antenna power is also provided. Soft-touch controls provide

convenient access to selection of operating frequency and automatic

scanning, while an LCD information display provides constant

monitoring of system operation. The receiver is half-width for a standard

1U 19" rack mount; rack-mount adapters are included. Two receivers can

be mounted side by side, using an optional AT8630 joining-plate kit.

The versatile ATW-T210a UniPak

® body-pack transmitter has both

low- and high-impedance inputs plus a bias connection, for use

with dynamic and electret condenser microphones, as well as Hi-Z

instrument pickups. The UniPak

® transmitter also offers separate trim

controls for instrument and microphone, plus switchable high/low RF

power.

The ATW-T220a handheld dynamic microphone/transmitter features

the same element used in the PRO 41 dynamic handheld microphone

created for professional live-sound venues. It also offers switchable

high/low RF power. Both the ATW-T210a UniPak® and ATW-T220a

handheld transmitters also offer charging contacts so the units can be

placed in an optional recharging station for multi-transmitter charging.

For economical operation and wide availability, transmitters in the

2000 Series use two 1.5V AA alkaline batteries or rechargeable two AA

NiMH batteries for use with Audio-Technica’s ATW-CHG2 Recharging

Station. Both transmitters have battery condition indicators. 2000 Series

receivers feature a sophisticated Tone Lock™ tone squelch system that

opens the receiver’s audio output only when a 2000 Series transmitter

is detected, reducing the possibility of interference. As a result, 2000

Series transmitters and receivers must be used together and should not

be used with components from other Audio-Technica wireless systems,

or with those of other manufacturers.

Please note that in multiple-system applications there must be a

transmitter-receiver combination set to a separate channel (frequency)

for each input desired (only one transmitter for each receiver).

Because the wireless frequencies are within UHF TV frequency bands,

only certain channels (operating frequencies) may be useable in a

particular geographic area. The 10 channels (operating frequencies) per

band that are used in the 2000 Series have been selected for multi-

channel compatibility. Subject to frequency availability in a particular

geographic area, any of these 10 channels may be used together. The

operating frequencies that correspond to each of the 10 channels are

listed on page 10.

Receiver Installation

Location

For best operation the receiver should be at least 3 ft. (1 m) above the

ground and at least 3 ft. away from a wall or metal surface to minimize

reections. The transmitter should be at least 3 ft. from the receiver,

as shown in Figure A. Keep antennas away from noise sources such

as digital equipment, motors, automobiles and neon lights, as well as

away from large metal objects.

Fig. A

Output Connections

There are two audio outputs on the back panel: balanced and

unbalanced. Use shielded audio cable for the connection between the

receiver and the mixer. If the input of the mixer is a 1/4" jack, connect a

cable from the 1/4" unbalanced audio output on the back of the receiver

housing to the mixer. If the input of the mixer is an XLR-type input,

connect a cable from the balanced XLR-type audio output on the back

panel to the mixer. The two isolated audio outputs permit simultaneous

feeds to both unbalanced and balanced inputs. For example, both a

guitar amp and a mixer can be driven by the receiver.

Antennas

Attach the included pair of UHF antennas to the antenna input jacks.

The antennas are normally positioned in the shape of a “V” (both 45°

from vertical) for best reception.

Accessory antennas can be remotely located from the receiver.

However, due to signal loss in cables at UHF frequencies, use the

lowest-loss RF cables practical for any cable runs over 25 feet. RG8-

type is a good choice. Use only copper-shielded cable, not CATV-type

foil-shielded wire. Audio-Technica offers quality RF cables in four

lengths, as well as remote antennas; see audio-technica.com for a wide

selection of wireless system accessories.

Antenna Power

The antenna input jacks also can provide +12V DC output on their

center pins to power inline RF devices. A maximum of 60 mA can be

drawn from each of the jacks. While an accidental short-circuit will not

harm the internal 12V supply, make certain that an antenna cable shield

does not contact the center conductor. Antenna Power is selected by

a switch on the back of the ATW-R2100b Receiver. The unit is shipped

with the switch in the “off” position.

Note: the antennas included with the ATW-R2100b Receiver do

not require power. If you have an antenna system that requires power

(such as powered antennas or active combiners or splitters) switch the

Antenna Power switch to the “on” position.

Power Connections

Connect the included AC adapter to the DC power input on the back of

the receiver. Loop the small cord from the DC plug over the cord hook

above the jack, to keep the plug from being detached by an accidental

tug on the cord. Operation of the receiver is controlled by the front-

panel Power switch.

Product specificaties

Merk:	Audio-Technica
Categorie:	Niet gecategoriseerd
Model:	ATW-2000c

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica ATW-2000c stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Audio-Technica

Audio-Technica AT-BTR5 Handleiding

6 December 2024

Audio-Technica AT607a Handleiding

6 December 2024

Audio-Technica AT617a Handleiding

6 December 2024

Audio-Technica AT6902ST Handleiding

6 December 2024

Audio-Technica AT6901ST Handleiding

6 December 2024

Audio-Technica AT6902BR Handleiding

6 December 2024

Audio-Technica AT6901BR Handleiding

6 December 2024

Audio-Technica AT6900BR Handleiding

6 December 2024

Audio-Technica AT-RX10 Handleiding

6 December 2024

Audio-Technica AT-RX50 Handleiding

6 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx 03863 Handleiding

24 December 2024

Vello PGS-P Handleiding

24 December 2024

Venom Quad Charging Station VS4796 Handleiding

24 December 2024

Nec IPJ2000CM Handleiding

24 December 2024

Monogram ZKPN Handleiding

24 December 2024

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024