Audio-Technica AT33EV Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT33EV (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
Audio-Technica SAS, 28 rue Godefroy-Cavaignac, 75011 Paris, France
Audio-Technica Niederlassung Deutschland, Stiftstrasse 18, D-65183 Wiesbaden, Germany
©2010 Audio-Technica, www.audio-technica.com
AT33EV
AT33EV
Elliptical 1/2 inch Standard Mount Cartridge
The original model of this stereo cartridge is the AT33ANV, which was available
as a special release to celebrate our 45th anniversary. The A33ANV was the
first in the AN33 series to feature a Duralumin cantilever, which received wide
acclaim for its sound quality.
Retaining the basic specification, we present a further improved and evolved
model.
The A33EV is a ½ inch, standard mount 0.3 x 0.7 mm elliptical cartridge
featuring a tapered Duralumin cantilever which reduces the effective mass of
the cartridge, resulting in a more durable cantilever. The Dual Moving Coil
cartridge design increases channel separation and extends the frequency
response range delivering extraordinary audio quality. Internally constructed
with a neodymium magnet enhances magnetic energy and PCOCC wire for
pure audio transmission.
Elliptical stylus chip and durable duralumin tapered pipe cantilever.
10Ωmid impedance specifications.
Dramatically increased magnetism with neodymium magnets and PCOCC as
the coil.
High separation, wide-response dual moving coil.
VC Mold eliminates unnecessary vibrations.
“Hanenite” anti-vibration rubber eliminates unwanted vibrations.
RRP ex VAT 499,00
RRP inc. VAT £529.00
Ean code: T4961310103972
Specifications*:
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10 Ω(1kHz)
DC resistance: 10 Ω
Load resistance: More than 100 Ω(when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1,
Cartridge installation screws 13 mm × 2 and 19 mm × 2,
Nut × 2, Brush × 1, PCOCC lead set × 1
* Specifications are subject to change without notice.
PCOCC = Pure Copper by Ohno Continuous Casting process


Product specificaties

Merk: Audio-Technica
Categorie: Niet gecategoriseerd
Model: AT33EV
Kleur van het product: Burgundy, Gold
Gewicht: 6.9 g
Impedantie: 10 Ohm
Frequentiebereik: 15 - 50000 Hz
Voltage: 0.3 mV
Stylustype: Elliptisch
Kanaal balans (1kHz): 1.5 dB
Bijhouden van drukkrachten: 1.8 - 2.2 g
Bijhouden van de hoek: 23 °
Laad weerstand: 100 Ohm

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT33EV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Audio-Technica

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd