ATen UE250 Handleiding

ATen Kabels voor pc's en randapparatuur UE250

Lees hieronder de 📖 handleiding in het Nederlandse voor ATen UE250 (2 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Installation
Installation is simply a matter of plugging in the cables:
1. Plug the UE-250 USB cable into the computer’s USB
port or a USB hub.
2. Plug the USB peripheral into the UE-250 socket.
That’s all there is to it.
Troubleshooting
Problem Cause Solution
Device
operates
erratically
Static electricity or
insufficient power
may cause the
device to operate
erratically.
Reset the device by
unplugging the cable and
then plugging it back in or
use external power to your
linked devices.
specifications
Function Specification
Power Supply Bus Powered
Cable length (output) 5 m (16ft.)
Connectors 1 Type A Male
1 Type A Female
USB Specification 2.0 spec. for high, full and low
Driver Support Native Driver Support
Operating Temperature 5° - 40° C
Storage Temperature -20° - 60° C
Humidity 0% - 80% RH, NC
Weight 255g
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED
THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed,
implied, or statutory with respect to the contents or use of this
documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or
documentation without obligation to notify any individual or entity of such
revisions, or update. For further inquiries, please contact your direct
vendor.
- 5 -- 4 -
User Manual
UE-250
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the
unit, and/or any of the devices connected to it.
This package contains:
M1 UE-250 USB 2.0 Repeater Cable
M1 User Manual
If anything is damaged or missing, contact your dealer.
© Copyright 2003 ATEN® International Co., Ltd.
Manual Part No. PAPE-1240-100
Printed in Taiwan 10/2003
All brand names and trademarks are the registered property of their respective owners
.
1
2
Overview
The UE-250 USB Repeater Cable allows you to extend
the distance between your computer and your USB
peripherals by 5 meters (16’). Unlike typical cables, the
UE-250 is an active extension cable. All USB signals
transmitted through it are regenerated to maintain optimal
signal integrity to meet the USB 2.0 specification.
Features
MExtends the distance to USB devices by 5 m (16’)
MEmbedded custom ASIC regenerates transmitted USB
signals to maintain optimal signal integrity
System Requirements
MWhistler; Windows: XP, 2000, Me, 98 SE; Mac OS 8.6
or higher
Note: Only systems with a USB 2.0 driver installed
can support data transfer speeds of up to 480
Mbps; all others only support speeds of up to
12 Mbps.
MUSB 2.0 Host Controller installed on the system.
Note: The UE-250 can be connected to a USB 1.1
Host Controller, but in that case, it only
supports USB 1.1 speeds (1.5 - 12 Mbps).
Components
1. Built in cable with USB connection to USB port on PC
or hub
2. LED (green) indicates USB link
3. Type female USB port for connection from peripheralA
4. LED (red) indicates overcurrent
- 2 -- 1 - - 3 -
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device
pursuant to Subpart J of Part 15 of FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
MReorient or relocate the receiving antenna.
MIncrease the separation between the equipment
and receiver.
MConnect the equipment into an outlet on a circuit
different from that which the receiver is connected.
MConsult the dealer or an experienced
radio/television technician for help.
1
2
4
3

Product specificaties

Merk: ATen
Categorie: Kabels voor pc's en randapparatuur
Model: UE250

Heb je hulp nodig?

Als je hulp nodig hebt met ATen UE250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Kabels voor pc's en randapparatuur ATen

ATen

ATen KA7570 Handleiding

12 November 2024
ATen

ATen CV190 Handleiding

8 Juli 2023
ATen

ATen SXP325A Handleiding

8 Juli 2023
ATen

ATen CS62KM Handleiding

7 Juli 2023
ATen

ATen CV211CP Handleiding

3 Juli 2023
ATen

ATen ACS-62 Handleiding

29 Juni 2023
ATen

ATen CV211 Handleiding

27 Juni 2023
ATen

ATen UC232 Handleiding

27 Juni 2023
ATen

ATen UC485 Handleiding

27 Juni 2023
ATen

ATen CV100KM Handleiding

25 Juni 2023

Handleiding Kabels voor pc's en randapparatuur

Nieuwste handleidingen voor Kabels voor pc's en randapparatuur

Panduit

Panduit CFX5IW-X Handleiding

17 November 2024
StarTech.com

StarTech.com 1P1FFCN-USB-SERIAL Handleiding

16 November 2024
Icy Box

Icy Box IB-CB009-1 Handleiding

16 November 2024
Yamaha

Yamaha CBL-L10AC Handleiding

16 November 2024
Tripp Lite

Tripp Lite N044-000-R Handleiding

15 November 2024
Tripp Lite

Tripp Lite N252-048-1U Handleiding

15 November 2024
UNITEK

UNITEK V1423A Handleiding

11 November 2024
Roline

Roline 11.09.4276 Handleiding

10 November 2024
Roline

Roline 14.01.3416 Handleiding

10 November 2024
Roline

Roline 11.04.5681 Handleiding

10 November 2024