Atdec AWMS-HX40-H-B Handleiding

Atdec Flat panel steun AWMS-HX40-H-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AWMS-HX40-H-B (1 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

AWMS-2-BT75-H Page 2 of 4

2. Fit clamp to work surface

2.1 Place in desired location

on worksurface.

1. Assemble post to clamp

1.1 Attach post to upper

clamp using the M8x60mm

screws and 5mm hex key.

1.2 Measure the worksurface

thickness and choose the

suitable lower clamp position.

1.3 Attach lower clamp to upper

clamp in the suitable position using the

M8x16mm screws and 5mm hex key.

2.2 Screw in both pressure plates

and tighten evenly and rmly.

2.3 Remove clips & covers from post by

sliding up & out or by squeezing sides.

SQUEEZE

to release

75mm

100mm

75mm

100mm

For 75mm VESA

unscrew 5mm to

access top holes

Option A

Attach VESA plate with

M4x10mm screws.

Option B

For recessed VESA

use 10mm spacers and

M4x20mm screws.

3.1 VESA compatibility.

NOTE:

Some displays require the

use of a VESA adapter

before attaching the

VESA plate. This VESA

adapter may ship in the

box with the display.

Consult your display’s

installation guide for

further information.

3. Attach VESA plates to displays

TOP

Top Middle Bottom

Top

Middle

Bottom

0 - 38mm (0 - 1 ”) ½

11 - 53mm ( ” - 2  ”)

25 - 68mm (1” - 2 ”)

Note: If there is only a small gap behind the

worksurface perform Step 2.1 before this step

Mounting

surface

5mm

Hex key

4. Slide brackets onto post and set height

4.1 Tilt bracket must only be attached with display

facing the front of the mounting surface.

WORK

SURFACE

WORK

SURFACE

BACK of desk

FRONT

INNER GUIDE

in rear post

channel

VIEW FROM ABOVE

Product specificaties

Merk:	Atdec
Categorie:	Flat panel steun
Model:	AWMS-HX40-H-B
Kleur van het product:	Zwart
Materiaal behuizing:	Aluminium
In hoogte verstelbaar:	Ja
Montagewijze:	Bureau
Maximale gewichtscapaciteit:	16 kg
Paneelmontage-interface:	75 x 75, 100 x 100 mm
Model:	Landschap/portret
Aantal per verpakking:	1 stuk(s)
Pan bereik:	-90 - 90 °
Montage:	Klem
Gemakkelijk te installeren:	Ja
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	1
Bereik kantelhoek:	-35 - 55 °
Maximale schermgrootte:	- "
Minimale schermgrootte:	- "
Inclusief VESA-montage:	Ja
Maximaal draagvermogen (per display/scherm):	1 kg
kantel aanpassingen:	Ja
Inclusief klem:	Ja
Verlengarm (max):	597 mm
Verstelbare diepte:	Ja