Chief KITXWXSM1U Handleiding

Chief Flat panel steun KITXWXSM1U

Lees hieronder de đź“– handleiding in het Nederlandse voor Chief KITXWXSM1U (16 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
I N S T A L L A T I O N I N S T R U C T I O N S
JUPITER PANA105 XX-LARGE
MICRO-ADJUST WALL MOUNT
KITXWXSM1U
KITXWXSM1U Installation Instructions
2
DISCLAIMER
Legrand AV and its affiliated corporations and subsidiaries
|
(collectively “Legrand AV”), intend to make this manual |
accurate and complete. However, Legrand AV makes no claim |
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand AV
|
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand AV
|
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all parts are properly
assembled and installed using the instructions provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the KITXWXSM1U does not exceed
250 lbs (113.4 kg).
NOTE: The combined component weight limit remains 250 lbs
(113.4 kg) when using with the FCAXV1U Pull-Out
Accessory.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
IMPORTANT ! :
The KITXWXSM1U mount is designed to be
mounted to:
• a bare concrete wall with a minimum thickness of 8"
(203mm);
• a bare 8" x 8" x 16" (203mm x 203mm x 406mm)
concrete block wall; or
• wood studs spaced 24" or 32" (610mm or 813mm) on
center with a maximum drywall covering of 5/8".
NOTE: The
KITXWXSM1U
extra large height adjust mount
may be used with the UL Listed FCAVX1U Fusion pull-
out accessories.
--SAVE THESE INSTRUCTIONS--
Installation Instructions KITXWXSM1U
3
DIMENSIONS
DIMENSIONS: [INCHES]
MILLIMETERS
1. MAXIMUM MOUNTING PATTERN IS 74.2" (1885 mm) WITHOUT REVERSING UPRIGHTS
2. MAXIMUM MOUNTING PATTERN IS 76.9" (1954 mm) WITH REVERSING UPRIGHTS
3. FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK ENGAGEMENT IS 0.75" (19 mm)
PIPE REINFOR CE ME NT
CO LL ARS
ANG LE
0°
A
DETA IL A
SCA LE 1 : 2
1°
B
DETA IL B
SC AL E 1 : 2
2°
C
DETAIL C
SC ALE 1 : 2
BACKWARDS ANGLE COMPENSATION SETTINGS


Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: KITXWXSM1U
Kleur van het product: Zwart
Gewicht: 16500 g
Breedte: 1168 mm
Diepte: 222 mm
Hoogte: 495 mm
Gewicht verpakking: 18000 g
Montagewijze: Muur
Land van herkomst: China
Maximale gewichtscapaciteit: 113.4 kg
Montage interface compatibiliteit (min): - mm
Montage interface compatibiliteit (max): 1300 x 600 mm
Verbeterd kabelbeheer: Ja
Maximale schermgrootte: 120 "
Minimale schermgrootte: 80 "

Heb je hulp nodig?

Als je hulp nodig hebt met Chief KITXWXSM1U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun Chief

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun