Aruba AP-114 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Aruba AP-114 (5 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Aruba 110 Series Access Points Aruba Data Sheet
Multifunctional and affordable 110 series wireless access
points (APs) maximize mobile device performance in high-
density Wi-Fi environments while minimizing interference
from LTE cellular networks.
These high-performance 802.11n APs deliver wireless data rates
up to 450 Mbps per radio and employ three spatial streams to
support 50% more throughput and mobile devices than previous-
generation APs.
The AP-115 and IAP-115 APs feature a 2.4-GHz and a 5-GHz radio,
each with 3x3:3 MIMO and three integrated omni-directional downtilt
antennas. The AP-114 and IAP-114 models feature the same radios
with three combined and diplexed external antenna connectors.
AdvAnced cellulAr coexistence (Acc)
The 110 series Advanced Cellular Coexistence (ACC) feature enables
Aruba WLANs to perform at peak efciency by minimizing
interference from 3G/4G LTE networks, distributed antenna systems
and commercial small-cell/femtocell equipment.
Wi-Fi client oPtiMiZAtion
To eliminate sticky client behavior while users roam, the 110 series
features patented ClientMatch™ technology, which continuously
gathers session performance metrics from mobile devices.
If a mobile device moves out of range of an AP or if RF interference
impedes performance, ClientMatch automatically steers the device
to a better AP.
Best-in-clAss rF MAnAGeMent
All Aruba APs include Adaptive Radio Management™ technology,
which is essential to creating the most reliable, high-performance
WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to
optimize Wi-Fi client performance and ensures that Aps stay clear
of RF interference.
The 110 series can be congured to provide part-time or
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations to
corporate resources, and wireless mesh connections where
Ethernet drops are not available.
cHoose Your oPerAtinG Mode
The 110 series of APs offers a choice of operating modes to meet
your unique management and deployment requirements.
• Controller-managed mode. When managed by Aruba Mobility
Controllers, 110 series APs offer centralized conguration, data
encryption, policy enforcement and network services, as well as
distributed and centralized trafc forwarding. Please refer to the
Aruba Mobility Controller data sheets for more details.
• Aruba Instant™ mode. In Aruba Instant mode, a single AP
automatically distributes the network conguration to other
Instant APs in the WLAN. Simply power-up one Instant AP,
congure it over the air, and plug in the other APs – the entire
process takes about ve minutes.
For large installations across multiple sites, the Aruba Activate™
service signicantly reduces deployment time by automating
device provisioning, rmware upgrades, and inventory
management. With Aruba Activate, Instant APs are factory-shipped
to any site and congure themselves when powered up.
If WLAN and network requirements change, a built-in migration
path allows 110 series Instant APs to become part of a WLAN that
is centrally managed by a Mobility Controller.
oPerAtinG Modes
• 802.11a/b/g/n controllerless Aruba Instant AP
• 802.11a/b/g/n Mobility Controller-managed AP
• Remote AP (RAP)
• Spectrum analysis identies sources of RF interference
• Air monitor provides wireless intrusion protection
• Hybrid AP serves Wi-Fi clients and provides wireless intrusion
protection and spectrum analysis
• Secure enterprise mesh
securitY
• With an service subscription, Aruba Instant RAPs OpenDNS
deliver integrated web ltering, malware and botnet protection to
every device connected to the WLAN
• Integrated Trusted Platform Module (TPM) for secure storage of
credentials and keys
• SecureJack-capable for secure tunneling of wired Ethernet trafc
AruBA 110 series Access Points
Optimize client performance in high-density Wi-Fi environments
Aruba 110 Series Access Points Aruba Data Sheet
Wireless rAdio sPeciFicAtions
• AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 3x3:3
• Software-congurable dual radio supports 5-GHz (Radio 0) and
2.4-GHz (Radio 1)
• 3x3 MIMO with three spatial streams and up to 450 Mbps
wireless data rate
• Supported frequency bands (country-specic restrictions apply):
-2.4000 to 2.4835 GHz
-5.150 to 5.250 GHz
-5.250 to 5.350 GHz
-5.470 to 5.725 GHz
-5.725 to 5.850 GHz
• Available channels: Dependent on congured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
-802.11b: Direct-sequence spread-spectrum (DSSS)
-802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
• Supported modulation types:
-802.11b: BPSK, QPSK, CCK
-802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Congurable in increments of 0.5 dBm
• Maximum (aggregate, conducted total) transmit power (limited
by local regulatory requirements):
-2.4-GHz band: +28 dBm (23 dBm per chain)
-5-GHz band: +25 dBm (20 dBm per chain)
• Advanced Cellular Coexistence (ACC) minimizes interference
from LTE cellular networks
• Maximum ratio combining (MRC) for improved receiver performance
• Cyclic delay/shift diversity (CDD/CSD) for improved downlink
RF performance
• Short guard interval for 20-MHz and 40-MHz channels
• Space-time block coding (STBC) for increased range and
improved reception
• Low-density parity check (LDPC) for high-efciency error
correction and increased throughput
• Supported data rates (Mbps):
-802.11b: 1, 2, 5.5, 11
-802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
-802.11n: 6.5 to 450 (MCS0 to MCS23)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
PoWer
• Maximum power consumption: 13 watts, plus up to 2.5 watts
for attached USB device.
• Power sources sold separately
• Direct DC source: 12 Vdc nominal, +/- 5%
• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or
802.3at-compliant source
-USB host port is disabled when using an 802.3af PoE power
source; for unrestricted operation with PoE power, use an
802.3at compliant source
AntennAs
• AP-114: Three RP-SMA connectors for external dual-band
antennas. Internal loss between radio interface and external
antenna connectors (due to diplexing circuitry): 1.5 dB in
2.4-GHz and 2.5 dB in 5-GHz.
• AP-115: Six integrated down-tilt omni-directional antennas for
3x3 MIMO with maximum antenna gain of 4.5 dBi in 2.4-GHz
and 5.5 dBi in 5-GHz. Built-in antennas are optimized for
horizontal ceiling mounted orientation of AP-115.
otHer interFAces
• 10/100/1000BASE-T Ethernet network interface (RJ-45)
-Auto-sensing link speed and MDI/MDX
-802.3az Energy Efcient Ethernet (EEE)
-PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+
• DC power interface, accepts 1.7/4.0-mm center-positive
circular plug with 9.5-mm length
• USB 2.0 host interface (Type A connector)
• Serial console interface (RJ-45, TTL levels)
• Visual indicators (LEDs):
-Power/system status
-Ethernet link status (ENET)
-Radio status (2x; RAD0, RAD1)
• Kensington security slot
• Reset button
MountinG
• Included with AP:
-Mounting brackets (2) for attaching to 9/16-inch or
15/16-inch T-bar drop-tile ceiling
• Optional mounting kits:
-AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-
grid rail adapters for Interlude and Silhouette style rails
-AP-220-MNT-W1: Aruba AP mount kit contains one at-
surface wall/ceiling mount bracket
-AP-220-MNT-W2: Aruba AP mount kit contains one at-
surface wall/ceiling secure mount cradle
MecHAnicAl
• Dimensions/weight (unit, excluding mount accessories):
-180 mm (W) x 180 mm (D) x 45 mm (H)
-7.09” (W) x 7.09” (D) x 1.77” (H)
-650 g (1.43 lbs)
• Dimensions/weight (shipping):
-220 mm (W) x 225 mm (D) x 55 mm (H)
-8.66” (W) x 8.86” (D) x 2.17” (H)
-880 g (1.94 lbs)
environMentAl
• Operating:
-Temperature: 0° C to +50° C (+32° F to +122° F)
-Humidity: 5% to 95% non-condensing
• Storage and transportation temperature range:
-Temperature: -4C to +7C (-40° F to +158° F)
Aruba 110 Series Access Points Aruba Data Sheet
REGULATORY
• FCC/Industry of Canada
• CE Marked
• R&TTE Directive 1995/5/EC
• Low Voltage Directive 72/23/EEC
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1, EN60601-1-2
For more country-specic regulatory information and approvals,
please see your Aruba representative.
REGULATORY MODEL NUMBERS
• AP-114 and IAP-114: APIN0114
• AP-115 and IAP-115: APIN0115
CERTIFICATIONS
• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi Alliance (WFA) certied 802.11a/b/g/n
WARRANTY
• Limited lifetime warranty
MINIMUM SOFTWARE VERSIONS
• ArubaOS™ 6.3.1.0
• Aruba InstantOS™ 4.0.0.0
RF PERFORMANCE TABLE
Max transmit power
per transmit chain
(dBm)
Receive sensitivity
per transmit chain
(dBm)
Max transmit power
per transmit chain
(dBm)
Receive sensitivity
per transmit chain
(dBm)
2.4 GHz 5 GHz
802.11b
1 Mbps 23 -97
11 Mbps 23 -88
802.11a/g
6 Mbps 21 -93 20 -92
54 Mbps 18 -76 16 -74
802.11n HT20
MCS0/8/16 20 -93 19 -92
MCS7/15/23 16 -73 14 -71
802.11n HT40
MCS0/8/16 20 -90 19 -88
MCS7/15/23 16 -69 14 -67
Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings. RF
performance numbers for the AP-114 are slightly lower due to additional internal RF circuitry.


Product specificaties

Merk: Aruba
Categorie: Access point
Model: AP-114

Heb je hulp nodig?

Als je hulp nodig hebt met Aruba AP-114 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Aruba

Handleiding Access point

Nieuwste handleidingen voor Access point