Apantac HDBT-1-E Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Apantac HDBT-1-E (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
HDBT- -1 SET
USER MANUAL
HDMI Extender/Receiver
based on
HDBaseT Technology
HDBT-1-E FRONT VIEW
1. IR Output
2. HDCP Indicator
3. LINK Indicator
4. POWER Indicator
HDBT-1-E REAR VIEW
HDBT-1-R FRONT VIEW
1. DC 12 V Input w/ Locking
2. LINK OUT (RJ45)
3. HDMI Input
4. RS232 Input
1. DC 12 V Input w/ Locking
2. LINK IN (RJ45)
3. HDMI Output
4. RS232 Output
1. IR Input
2. IR Input
3. HDCP Indicator
4. LINK Indicator
5. POWER Indicator
HDBT-1-R REAR VIEW
© 2012 APANTAC LLC, All rights reserved
7556 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
The content of this document is provided in connection
with Apantac LLC (“Apantac”) products. Apantac
makes no representation or warranties with respect to
the accuracy or completeness of the contents of this
publication and reserves the right to make changes to
specifications and product descriptions at any time
without notice.
FEATURES/
MODEL
HDBT-1-E HDBT-1-R
HDMI In 1 x HDMI A-
Type Female
None
HDMI Out 1 x HDMI A-
Type Female
RJ- 1 1 45
IR OUT 3.5 mm phone
jack
None
IR IN None 3.5 mm
phone jack
Max Resolution 1080p 60Hz 1080p 60Hz
Cable Distance 100 meters
(Max)
100 meters
(Max)
Power Adapter 12 V DC 12 V DC
Weight g) 310g 310g
Dimension
(mm)
150 W x 80 x
D 25 H
150 W x 80 x
D 25 H
Specifications
Accessories
Power Adapter IR Receiver Cable
Mounting Screws
IR Blaster Cable
Installation
1. Turn off the source (ex: DVD Players) and the
HDTV monitor.
2. Connect the HDMI cable between the source and
the <HDMI IN> port of the HDBT-1- E.
3. Connect the HDMI cable between the HDBT-1-R
between the monitor and the <HDMI OUT> port
of the HDBT-1- R.
4. Connect the CATx cable between the HDBT-1-E
and HDBT-1- R’s <LINK> port.
5. Connect the power.
IR Receiver Cable
Insert the IR receiver cable into the HDBT-1-R’s
<IR2 IN> (so you can point to it easily with your
IR remote control).
IR Blaster Cable
Insert IR blaster cable into HDMI-1-E <IR OUT>
port.
Locate it close to the IR receiving sensor on the
source (ex: DVD player).
GND
+V
Si g
NC
P+
N-
Pin
# Signal Pin
# Signal
1 TMDS Data 2+ 11 TMDS Clock Shield
2 TMDS Data 2 Shield 12 TMDS Clock -
3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved
(N.C. on device)
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5 Power
9 TMDS Data 0- 19 Hot Plug Detect
10 TMDS Clock+
Identification Pin
Assignment Color Code
Pair 1
5 White-Blue
4 Blue
Pair 2
1 White-Orange
2 Orange
Pair 3
3 White-Green
6 Green
Pair 4
7 White-Brown
8 Brown
CATx Wiring
Package Contents
1 x HDBT-1-E
1 x HDBT-1-R
User Manual
2 x Power Adapters (12V)
1 x IR Blaster Cable
1 x IR Receiver Cable
Magnetic Mounting Plate
Mounting Screws
Features
Uses the latest HDBase-T technology
Extends 1080p signals up to 330 feet
(100 meters) with a single CATx cable
Supports HDMI 1.4 with 3D function
Supports HDMI 1.2 and 1.3a
HDCP Compliant
Supports 3D pass-through
Supports CEC pass-through
Supports RS-232 (Bi-directional transfer)
Supports al frequency band IR control


Product specificaties

Merk: Apantac
Categorie: Niet gecategoriseerd
Model: HDBT-1-E

Heb je hulp nodig?

Als je hulp nodig hebt met Apantac HDBT-1-E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Apantac

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd