Anthro Zido Pole Cart Handleiding

Anthro Bureau Zido Pole Cart

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthro Zido Pole Cart (4 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Ass embly inst ru ct ions

Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

Zido® Cart

Rev H, January 2011

Product Part#

Zido Carts ZD2231SB/CG4

ZD2235SB/CG4

ZD2240SB/CG4

ZD2531SB/CG4

ZD2535SB/CG4

ZD2540SB/CG4

ZD2166SB/CG4

Zido Pole Cart ZD2166SB4

WELC O ME

Thank you for purchasing Zido. If you

have any questions or if we can help

you in any way, please contact us at

800.325.3841.

PARTS L IST

Before beginning assembly of your Zido

cart please review the parts list to verify

that your shipment is complete.

All Screw quantities listed here are the

minimum needed for your Zido assembly.

There may be a few extra Screws included

which are not counted in the Parts List.

To make the assembly of your Zido even

easier, we have included the required

tools. The handy Hex Driver Bit can be

used in your electric drill in place of the

Hex Driver.

Zido Cart Quantity Part Number

01 Base

Small, 22" wide 1 250-3064-00

Large, 25" wide 1 250-3065-00

02 Tube

24" long (for 31” high cart) 1 500-1031-00

28" long (for 35” high cart) 1 500-1030-00

33" long (for 40” high cart) 1 500-1032-00

03 Cap Shelf

22” wide 1 101-1025-06-50

25” wide 1 101-1026-06-50

04 Casters

4” Locking 2 150-5011-03

4” Non-locking 2 150-5010-03

05 Tapped Strip 1 225-2621-00

06 Cap Shelf Bracket 1 225-2620-00

07 3/4" Flat Head Screw 2 325-5466-00

08 Wood Screws 8 325-5106-00

09 1/2" Socket Head Cap Screw 4 325-5455-00

Zido Pole Cart Quantity Part Number

01 Base 1 250-3065-00

02 Tube 1 125-4324-00

04 Casters

4” Locking 2 150-5011-03

4” Non-locking 2 150-5010-03

05 Tapped Strip 1 225-2621-00

3/4" Socket Head Cap Screw (not shown) 2 325-5461-00

End Cap (not shown) 1 175-5235-00

Product Quantity Part Number

Hex Driver 5/32” 1 375-5000-00

(not shown)

Hex Driver Bit 5/32” 1 375-5003-00

(not shown)

3Questions? Call us at 800.325.3841 or visit . We’re happy to walk you through the assembly!anthro.com

STEP 2

Install the Casters

¡ Add the locking casters (the ones with the brakes) to

the front of the base assembly.

¡ Add the non-locking casters to the back of the

base assembly. If you have a Fixed-height Cart, skip

ahead to Step 3.

¡ If you have a Zido Pole Cart, make sure that the

holes on the column line up with the holes on the

base and tighten the screws. Next, insert the End

Cap in the top of the Pole. Congratulations! Your

assembly is complete!

ASSEMBLY SEQUENC E

Plan out the assembly to make your installation easier. We suggest this sequence to reduce interference

between accessories.

1. Pre-drill the top for accessories (Mouse Holder, Side Bin, Gel Cup/Probe Holder, Extension Tube).

2. Assemble the cart.

3. Base Storage Shelf.

4. Drawer, Keyboard Drawer, Handle.

5. Additional Shelves, Equipment Shelves, Metal Bin, IV bracket.

6. Cable Bin, Glove Box Holder, Tank Holder.

7. Mouse Holder, Side Bin, Gel Cup Probe Holder, Extension Tube.&

8. Pole Cart Handle, Flat Panel Mounts.

STEP 1

Connect the Base with the Tube

¡ Slide the nut bar into the bottom of the base

assembly, smooth side against the inside of the tube,

with the two threaded holes on the top and the single

threaded hole at the bottom. Loosely attach the nut

bar to the tube with one 3/4" Flat Head Screw.

¡ Slide the tube into the base so that the notch at the

bottom of the tube goes over the screw. Align the

upper hole on the base with a threaded hole on the

nut bar. (For the 25w cart and the Pole Cart, you'll use

the top hole; for the 22w cart, you'll use the second

hole.) Loosely attach the nut bar, tube, and base with

the second 3/4" Flat Head Screw.

3/4" Flat Hd Screw

325-5466-00

Product specificaties

Merk:	Anthro
Categorie:	Bureau
Model:	Zido Pole Cart
Kleur van het product:	Grijs
Breedte:	539.75 mm
Diepte:	508 mm
Hoogte:	1676.39 mm
Maximale gewichtscapaciteit:	68 kg