Anthro Trolley Handleiding

Anthro Bureau Trolley

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthro Trolley (2 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

TECHNOLOGY FURNITURE®

Trolley Cart

Assembly Instructions

01– Trolley Trunk Assembly (X) ..........Qty. 1 .................................................

TR18zz/xx.............................................................................. 835-5018-00

TT18zz/xx .............................................................................. 835-5401-00

02– 5” Total Lock Casters ................. Qty. 2 150-5081-00 ....................

03– 5/16-18 Button Head Screw ....... Qty. 16 325-5188-00 ..................

04– 5/16-18 X 1” Tube Screws ........... Qty. 4 325-5136-00 ....................

05– 5” Swivel Lock Casters .............. Qty. 2 150-5080-00 ....................

06– Trolley Trunk Covers ........................ Qty. 2 ................................................

TR18zz/xx..............................................................................225-5753-00

TT18zz/xx ..............................................................................225-4278-00

07– 18.25” Lower Cross Tube ............... Qty. 1 125-5244-xx ......................

08– Trolley Trunk Assembly (Y) ..........Qty. 1 .................................................

TR18zz/xx.............................................................................. 835-5019-00

TT18zz/xx .............................................................................. 835-5402-00

09– 12” Upper Cross Tube ............... Qty. 1 125-5243-00 .....................

10– Trolley Cable Wraps .........................Qty. 2 225-5756-00 .....................

11– 1/4-20 Keps Nuts ...............................Qty. 6 325-5202-00 .....................

12– 18” Handle .......................................... Qty. 1 125-5245-00 .....................

13– Shelf & Handle Side (X) ............ Qty. 1 225-5754-00 .....................

14– 18.5” Wide Trolley Shelf ................Qty. 1 100-6495-00 .....................

15– Shelf & Handle Side (Y) .................Qty. 1 225-5755-00 .....................

16– 3/4” Wood Screws ..............................Qty. 6 325-5106-00 ......................

17– 1/4-20 Button Head Screws ...... Qty. 14 325-5210-00 ...................

18– 1/4-20 X 2” Handle Screws ........ Qty. 2 325-5034-00 .....................

19– Non-Skid Pads (not shown) ......... Qty. 8 175-5068-03 .....................

Hello!

Thank you for choosing Anthro.

Before beginning assembly of your

Trolley, please take a moment to re-

view the parts listed below to verify

that your shipment is complete.

All fastener quantities shown are the

minimum needed for this assembly.

There may be a few extras provided

which are not required.

Questions? 1-800-325-3841

Step 7a

Install Non-skid Pads on the top of the Trolley Trunk

Covers to cushion the edge of each Trunk Assembly where it

meets the cover. Install pads on the inside face of the cover,

at the edge, about 3.5” below the threaded holes at the top of

the cover.

The following Tools (not shown at right) have

been provided:

Hex Driver

5/32” 375-5000-00 ............

Hex Key 6mm 375-5013-00 ...............

/16

” Allen Key 375-5028-00 ...............

3-way Wrench.............225-5196-03

5/32” Driver Bit ...........375-5003-00

Button Head Screws

Anthro® Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com

SAVE THESE INSTRUCTIONS! November 2010, Rev H1-800-325-3841

Trunk Cover

Step 8

STOP: IF YOU PURCHASED A SWING OUT MOUSE SHELF READ

THOSE INSTRUCTIONS BEFORE INSTALLING THE TOP.

Finally, place the main Trolley Shelf onto the installed

Shelf & Handle Sides, aligning the six holes on the

Shelf with those on the Sides.

Secure the Shelf to the Sides using a total of six

3/4” Wood Screws. Tighten all Screws and Nuts.

Congratulations! Your assembly is complete!

3/4” Wood Screw

325-5106-00

/4” Wood Screws

into the six Trolley

Shelf holes

Step 7b

STOP: IF YOU PURCHASED A TROLLEY

EQUIPMENT SHELF, ADDITIONAL WOOD SHELF, OR TROLLEY

TRAY READ THOSE INSTRUCTIONS BEFORE INSTALLING THE

TRUNK COVERS.

Install the Trolley Trunk Covers by orienting both Covers with

the Trunk Assemblies.

Secure the top and bottom of each Cover using a total of four

Button Head Screws per Cover.

Non-Skid Pad

175-5068-03

Threaded holes

Button Head

Screws

17 18

(1/4-20 X .375”) Button Head Screw

325-5210-00 Component list for

part # TR18zz/xx and TT18zz/xx.

3.5”

Non-Skid Pads

Trolley Cart

Anthro® Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com

Step 3 (requires the 6mm Hex Key)

Position both Trunk Assemblies and the 18” Lower Cross Tube

as shown.

Insert the 18” Cross Tube into the Large Holes of each Trunk

and loosely attach the Tube to each Trunk using one Tube

Screw per end.

NOTE: The 18” Cross Tube ends are keyed to ﬁt into the Trunk

Assemblies.

NOTE: If you purchased a Trolley Base Shelf, install the Casters

to the Trunk Assemblies during this Step.

anthro.com

Step 5 (requires the 3-Way Wrench)

Position one Trolley Shelf & Handle Side against a Trunk As-

sembly. Insert the two posts of a Side into holes 3 & 5 (from

the top) of the Trunk. Loosely attach the Side to the Trunk

with one Button Head Screw and Keps Nut. Repeat for the

other Side.

Place the Trolley Handle between both Sides. Insert a Handle

Screw through both ends of the Side and carefully thread into

the Handle. Tighten the Button Head Screws on the Sides.

NOTE: By installing the Side posts into holes 3 & 5, your ﬁnal

Shelf height will be 36” from the ﬂoor.

Questions? 1-800-325-3841

Step 2 (requires the 3-Way Wrench)

STOP: IF YOU PURCHASED A TROLLEY BASE SHELF, READ THOSE

INSTRUCTIONS NOW.

Install all four Casters to both Trunk Assemblies using four Button

Head Screws per Caster.

DOUBLE CHECK THE INSTALLATION of the Swivel Lock Casters

(Green Brake Pedal) by positioning the Trunk Assembly & Caster

as shown. Then depress the Brake. If it is installed correctly, the

Caster will be locked in a parallel orientation with the (as shown)

Trunk Assembly.

NOTE: Make certain to install one Swivel Lock Caster (green brake)

and one Total Lock Caster (black brake) onto each

Trunk Assembly.

Step 4 (requires the 6mm Hex Key)

Rotate the Cart Assembly (from Step 3) onto the Casters.

Place the 12” Upper Cross Tube between each Trunk Assembly

and align the Tube with the Large hole, midway

up the Trunk.

Carefully secure into place using one Tube Screw per end.

(5/16-18 X 1”) Tube Screw

325-5136-00

(5/16-18 X 3/4”) Button Head Screw

325-5188-00

(1/4-20 X .375”) Button Head Screw

325-5210-00

(1/4-20) Keps Nut

325-5202-00

(5/16-18 X 1”) Tube Screw

325-5136-00

/4-20 X .375”) Button Head Screw

325-5210-00

(1/4-20) Keps Nut

325-5202-00 (1/4-20 X 2”) Handle Screw

325-5034-00

Total Lock Caster

(Black Brake Pedal)

front position

Swivel Lock Caster

(Green Brake Pedal)

rear position

Trunk Assembly (Y)

Trunk Assembly (X)

Keyed Cross Tube

ends

Large hole

Shelf & Handle Side

(X)

Trolley Handle and Shelf & Handle Side (Y)

are removed for clarity.

Hole 7

Hole 9

Shelf & Handle Side

(X)

Button Head

Screw

Keps Nut

Cable Hanger

Step 6 (requires the 3-Way Wrench)

Determine the location for your Trolley Cable Hangers, then

position one against a Trunk Assembly.

Insert two Button Head Screws through the Cable Hanger and

capture on the opposite side using two Keps Nuts.

Repeat for remaining Cable Hanger.

Step 1

BEFORE YOU BEGIN, take special notice of the features on the

Swivel Lock Casters (those with the Green Brake Pedals).

The teeth on the plate of both Swivel Lock Casters need to face

the rear of the Trunk Assemblies.

Step 2 will give further instructions about securing the

Casters to the Trunk Assemblies.

Teeth

(on the Plates) faces the rear of

the Trunk Assemblies Plate

Installed to the Trunk

Assemblies

NOTE: There are a matching set

of teeth on the truck. Since the

truck rotates, their orientation is

not critical.

Swivel Lock Caster

(Green Brake Pedal)

Rear of the Trunk As-

semblies

Truck

Trunk Assembly (Y)

Large hole

12” Cross Tube

Shelf & Handle Side

(Y)

Handle Screw

Button Head Screw

Keps Nut

Hole 3

Hole 5 Post

Product specificaties

Merk:	Anthro
Categorie:	Bureau
Model:	Trolley
Kleur van het product:	Grey, Silver
Breedte:	469.9 mm
Diepte:	736.59 mm
Hoogte:	965.19 mm
Maximale gewichtscapaciteit:	68 kg