Anthro Security Cart Handleiding

Anthro Bureau Security Cart

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthro Security Cart (2 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

TECHNOLOGY FURNITURE®

Funnel Head

Screw

Base Assembly

(Green Brake Pedal)

01 02

19 20

Security Cart 30" Wide

Assembly Instructions

01– Shelf Clamp ...................................Qty. 4 .........................175-5059-00

02– Shelf Support.............................. Qty. 4 .........................175-5060-00

03– Clamp Screw .............................. Qty. 4 .........................325-5086-00

04– Door ............................................ Qty. 1 ........................835-5041-00

05– 30" Vertical Legs ........................ Qty. 4 .........................125-5267-00

06– 1.5" End Cap .............................. Qty. 4 .........................175-5020-00

07– Side Panel X ............................... Qty. 1 ........................225-5948-00

08– 30" Wide Shelf ......................... Qty. 1 .........................100-6525-00

09– Panel Hanger ............................. Qty. 2 .........................225-5950-00

10– Panel Screw ................................Qty. 4 .........................325-5196-00

11– Back Panel ................................... Qty. 1 .........................225-5942-00

12– Cap Screw .................................. Qty. 32 .......................325-5188-00

13– 5" Rhombus Casters ................. ........................................ (see below)

Swivel Lock Caster ................... Qty. 2 .........................150-5080-00

Total Lock Caster ..................... Qty. 2 .........................150-5081-00

14– Lock Nut .....................................Qty. 16 .......................325-5263-00

15– Caster Mount Bracket ............. Qty. 4 ...........225-0585-04-02-00

16– 3/4" Wood Screw ..................... Qty. 12 .......................325-5106-00

17– Funnel Head Screw ................... Qty. 4 .........................325-5245-00

18– Corner Bumper ......................... Qty. 4 .........................175-5112-00

19– Support Screw ........................... Qty. 12 .......................325-5010-00

20– Side Panel Y ................................ Qty. 1 .........................225-5949-00

21– Metal Base ................................. Qty. 1 .........................225-5944-00

All Screw quantities listed here are the minimum needed for your

Cart assembly. There may be a few extra Screws included, which are

not counted in the Parts List.

Anthro® Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062

SAVE THESE INSTRUCTIONS! 1-800-325-3841June 2006 Rev C

Questions? 1-800-325-3841

Enclosed Parts List

Detailed views of all Hardware is provided with each Assembly Step.

These Assembly Instructions are for

the SEC30xx/xx.

Before beginning assembly of your

Security Cart, please take a moment to

review the parts listed below to verify

that your shipment is complete.

It may also be helpful to review the

Assembly Instructions of all Anthro Prod-

ucts you purchased and are planning to

include in

this installation.

To make the assembly of your Security

Cart even easier, we have included all of

the required tools. The handy Hex Driver

Bit can be used in your electric drill in

place of the Hex Driver.

Hex Driver 5/32" .......375-5000-00

3-Way Wrench ...........225-5196-00

Hex Key 3/16" ............375-5028-00

NOTE: When using a power drill

during assembly, ALWAYS begin

threading fasteners by hand!

Panel Screw

Step 9

Rotate your Cart upright.

Facing the rear of the Cart, orient the Back Panel so the

tabs are towards the bottom.

Carefully insert the two small tabs at the bottom of the

Back Panel into the slots on the Metal base. Tilt the top of

the Back Panel towards the Cart to meet the Panel Hang-

ers. Secure using two Panel Screws.

Panel Screw

325-5196-00

Back Panel

Step 8

Place the Metal Base Assembly onto the legs. Check the

orientation of the Base Assembly. Casters with the Green

Brake Pedals should face either the left or the right. Also,

the slots on the metal base (used for installing the Back Panel)

should align with the Panel Hangers on the wood shelf.

Align Vertical Legs with corner holes in the Base Assembly.

Insert a Funnel Head Screw through the Base and carefully

thread into the Leg.

Repeat for other three corners and tighten all screws.

Funnel Head Screw

325-5245-00

Step 11

Pop the 1.5" End Caps into the tops of the Legs.

Congratulations! Your assembly is complete.

1.5" End Cap

Back Panel

Mount Detail

Tabs

Step 10

Orient the Door so that the Lock Assembly is at the top.

With the Door in the open position , align the (as shown)

pins on the Door Hinges with the Hinges on the Cart

and slide down into place.

Door

Lock Assembly

Hinge Attachment Detail

Anthro® Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062 www.anthro.com

Nylon Lock Nut

325-5263-00

Cap Screw

325-5188-00

Step 1

Secure a Caster to a Caster Plate using four 3/4" Cap Screws

and Lock Nuts per Caster.

Repeat for remaining Casters, Caster Plates, Bolts, and Nuts.

Inside Edge

(Green Brake Pedal)

Cap Screw

Lock Nut

Cap Screw

325-5188-00

Step 2

Place the Caster Plates with the Green Brake Pedals onto one

side of the Metal Base, sliding each Plate under the anges on

the Metal Base. Secure using four Cap Screws.

Install the remaining Caster Plates on the other side.

Double-check the installation of the Swivel Lock Casters

(green brake pedal) by positioning the Caster Plates as shown.

Now depress the Brake. If it is installed correctly, the

Caster will be parallel with the Metal Base .(as shown)

3/4" Wood Screw

325-5106-00

Caster Bracket is

positioned BELOW

the ange

Metal Base

ange

Rear Edge of

Metal Base has

four small holes

along edge.

Swivel Lock Casters

(Green Brake Pedal)

Swivel Lock Casters

(Green Brake Pedal)

Base Assembly

First

Final

Barbs

Cart Assembly

Step 5

Loosely attach the 30" Wide Shelf to the second hole from the

top of each Vertical Leg using a Support Screw.(uncapped end)

Next, align the two openings on each of the Panel Hangers with

those on the Shelf. Secure into place using two Wood Screws

through the Bracket into the Shelf.

Repeat for other Panel Hanger.

Wood Screw

Support Screw

325-5010-00

3/4" Wood Screw

325-5106-00 Support Screw

24" Wide Shelf

Vertical Legs

Step 6

Align one vertical leg so that the end with the Star Nut

inside is facing up. Loosely attach the 30" Wide Shelf to

the second hole down using a Support Screw.

Next, align each Panel Hanger with the pre-drilled holes

on the shelf. Secure in place using two Wood Screws.

Support Screw

325-5010-00

3/4" Wood Screw

325-5106-00

Side Panel Y

Support Screw

Vertical Leg

30" Wide Shelf

Side Panel X

Support Screw

325-5010-00

3/4" Wood Screw

325-5106-00

Wood Screw

30" Wide Shelf

Step 7

Install the Side Panel X using the same (with hinges)

procedure described in Step 6.

Repeat for Side Panel X .(with hinges)

Cap Screw

Panel Hanger

Wood Screw

Step 3

Slide the Plastic Corners between the Metal Base and

Caster Plates, securing with one 3/4" Wood Screw

through each Bracket into the Plastic Corners.

Hollow side

face up

Wood Screw

Step 4

Attach four Shelf Supports to the Top Shelf. Begin by rst

installing a Clamp into the Shelf notch. Be sure the pointed

Barbs face towards the outer Shelf edge.

Next slide a Shelf Support into the recesses of

the Clamp and Shelf. Push in as far as possible.

Finally, secure with a Clamp Screw

Clamp Screw

325-5086-00

Product specificaties

Merk:	Anthro
Categorie:	Bureau
Model:	Security Cart
Kleur van het product:	Grey, Silver
Breedte:	800 mm
Diepte:	558.8 mm
Hoogte:	952.5 mm
Maximale gewichtscapaciteit:	113.39 kg
Draaihoek:	360 °
Afmetingen (B x D x H):	800 x 558.8 x 952.5 mm
Bereik kantelhoek:	0 °
Lift:	0 cm