Anthro Fit Standard Unit Handleiding

Anthro Bureau Fit Standard Unit

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthro Fit Standard Unit (2 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

01–Worksurface ...................................Qty. 1 ....................... (see below)

60" Wide Worksurface (F6029zz/xx3) ...............100-6434-00

72" Wide Worksurface (F7229zz/xx3) ...............100-6435-00

02–Front Lip ...........................................Qty. 1 ....................... (see below)

60" Wide Front Lip (F6029zz/xx3) ......................225-5555-00

72" Wide Front Lip (F7229zz/xx3) ......................225-5556-00

03– Support Bracket-B.......................Qty. 1 ...................225-2296-00

04– 22.875" Vertical Legs .................Qty. 4 ...................125-5213-00

05– Base Tubes .......................................Qty. 2 ..................125-5273-00

06– Cross Tubes ....................................Qty. 2 ....................... (see below)

60" Wide Cross Tube (F6029zz/xx3) ..................125-5221-00

72" Wide Cross Tube F7229zz/xx3) ....................125-5222-00

07– Insert Screws .................................Qty. 4 ...................325-5052-00

08– 2" Large End Caps .......................Qty. 4 ...................175-5157-00

09– 3" Locking Casters ......................Qty. 2 ...................150-5053-00

10– Caster Inserts ...............................Qty. 4 ...................525-5032-00

11– 5/16-18 Bolts ....................................Qty. 8 ...................325-5194-00

12– Tube Washers ................................Qty. 8 ..225-2050-00 or 225-3522-00

Components List for part #’s

F6029zz/xx3 & F7229zz/xx3

13– 3" Non-Locking Casters ...........Qty. 2 ...................150-5052-00

14– Buttress............................................Qty. 2 ....................... (see below)

60" Wide Buttress (F6029zz/xx3) ........................225-5549-00

72" Wide Buttress (F7229zz/xx3) ........................225-5550-00

15– Support Screws ............................Qty. 12 ................325-5010-00

16– 3/4" Wood Screws .........................Qty. 11 ................325-5106-00

17– Support Bracket-A ......................Qty. 1 ...................225-2295-00

18– 1/4-20 Keps Nuts ...........................Qty. 4 ...................325-5130-03

19– Cross Ends .....................................Qty. 2 ...................225-5334-00

20– 1/4-20 Button Head Screws ......Qty. 8 ...................325-5003-00

21– Back Trough ....................................Qty. 1 ....................... (see below)

60" Wide Back Trough (F6029zz/xx3) ................225-2293-00

72" Wide Back Trough (F7229zz/xx3) ................225-2294-00

22– 1.5" Small Caps .............................Qty. 4 ...................175-5156-00

All Screw quantities listed here are the minimum needed

for your Fit System assembly. There may be a few extra

Screws included, which are not counted in the Parts List.

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com

SAVE THESE INSTRUCTIONS! Rev. C January 2006

Step 12

Position a Cross Tube between the Base Tubes. Attach

by inserting a Bolt through a Tube Washer, then insert the

Bolt through the Base Tube and carefully thread into the

Cross Tube. Repeat for remaining Bolts, Tube Washers &

Cross Tube, then tighten all Bolts and Wood Screws.

Carefully, rotate your Standard Unit onto its Casters and

insert the four 1.5" End Caps into the Vertical Legs.

Congratulations! Your assembly is complete.

1-800-325-3841

Hello! Thank you for choosing Anthro.

Before beginning assembly of your

Standard Unit, please take a moment to

review the parts listed below to verify

that your shipment is complete.

Please review the assembly instructions

of all Anthro products you purchased and

are planning to include in this installation,

prior to beginning this assembly.

To make the assembly of your Standard

Unit even easier, we have included all

of the required tools. The handy Hex

Driver Bit can be used in your electric

drill in place of the Hex Driver.

Hex Driver 5/32" ..........375-5000-00

Hex Driver Bit 5/32" ....375-5003-00

8 oz. Rubber Mallet ....375-5022-00

3-Way Wrench ...........225-5196-03

Questions? 1-800-325-3841

(5/16-18 X 3.5") Bolt

325-5194-00

Tube Washer

225-2050-00 or 225-3522-00

10 12

09 13

18 19

Step 10

Install two Caster Inserts into each Base Tube and

secure with one Insert Screw per Caster Insert.

Insert one Locking and one Non-Locking Caster into

each Insert of a Base Tube as shown.

Insert two End Caps into the ends of both Base Tubes.

Insert Screw

(with pink threads)

325-5052-00

Locking

Caster

Caster Inserts placed

into the large holes

Leave these two side holes open

Non-Locking

Caster

Support Screw

325-5010-00

1.5" End Cap

Bolt

Tube

Washer

Cross Tube

Step 9 (requires the 3-Way Wrench)

Rotate the Buttress and Cross End upward to align the

holes on the Cross End with two corresponding holes

on a Vertical Leg. Secure the Cross End to the Vertical

Leg using two Support Screws.

Repeat Steps 7, 8 & 9 for the remaining Buttress and

Cross End on the opposite side. Then, tighten all Screws

& Keps Nuts.

Support Screws

Please return the enclosed Registration Card to receive

our product updates, new catalogs, and sale ﬂyers.

Thank you for choosing Anthro!

60"/72" wide Standard Unit

Assembly Instructions

Detailed views of all Hardware are

provided with each Assembly Step.

Step 11

Attach a Cross Tube to a Base Tube by inserting a Bolt

through a Tube Washer, then insert the Bolt through the

Base Tube and carefully thread into the Cross Tube.

Repeat this procedure for other Cross Tube. Then

tighten all Bolts.

Tube Washer

225-2050-00 or 225-3522-00

Cross Tube

Tube Washer

(5/16-18 X 3.5") Bolt

325-5194-00

Bolt

Base Assembly

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062

Step 1

Place your Worksurface onto the ﬂoor with the predrilled

holes facing upward.

Position the Support Brackets onto the Worksurface and

align two of the holes on each Bracket with the predrilled

holes on the Worksurface.

Loosely secure each Support Bracket to the Worksurface

using two Wood Screws per Support Bracket.

Step 2

Place the Front Lip onto the straight edge of the Shelf

and secure using four Wood Screws as shown.

anthro.com

Step 4

Determine the best height for your Worksurface.

These instructions will place your Worksurface 29" from

the ﬂoor using the standard 3" Casters. For a ﬁnal Shelf

height that is lower than 29", adjust one hole down for

each inch of variance desired.

NOTE: Your Worksurface height may be changed after your

Standard Unit has been completely assembled by repeating

Steps 5, 6, 7, 8 & 9.

Step 5

Attach a Vertical Leg by installing two Support Screws

through the Support Bracket-A into holes 1 & 3 from the

top of a Vertical Leg. (non-coped end)

Repeat for the second Vertical Leg to be installed to

Support Bracket-A.

Support Screw

325-5010-00

Step 3

Position the Back Trough onto the Worksurface, between

the installed Support Brackets (as shown).

Align the two threaded holes on each end of the Back

Trough with the holes on both Support Brackets. Carefully,

thread one Button Head Screw through the Support

Bracket, into the Back Trough. Repeat for remaining three

Button Head Screws.

Install three Wood Screws through the holes on the Back

Trough ﬂange (which should be aligned with three predrilled

holes on the Worksurface).

Step 6

Attach the remaining Vertical Legs to Support Bracket-B

using the same procedure used in Step 5.

NOTE: Make certain to install the Vertical Legs into the same

holes used in Step 5.

Support Screw

325-5010-00

3/4" Wood Screw

325-5106-00

3/4" Wood Screw

325-5106-00

3/4" Wood Screw

325-5106-00

(1/4-20 X .50") Button Head Screw

325-5003-00

29"

Questions? 1-800-325-384160"/72" wide Standard Unit

Step 7

Position a Buttress against the Back Trough, aligning the

holes on both Buttress and Back Trough.

Insert a Button Head Screw from the rear of the Trough, and

capture on the opposite side using a Keps Nut.

NOTE: Just hand tighten the Keps Nut at this point.

Step 8

Position a Cross End on the opposite end of the Buttress

installed during Step 7.

Insert a Button Head Screw from the rear of the Buttress,

through the Cross End and capture on the opposite side

using a Keps Nut.

NOTE: Just hand tighten the Keps Nut at this point.

(1/4-20 X .50") Button Head Screw

325-5003-00

(1/4-20) Keps Nut

325-5130-03

(1/4-20 X .50") Button Head Screw

325-5003-00

(1/4-20) Keps Nut

325-5130-03

Hole 1=29" Final Worksurface Height

Support Bracket-A

Support Bracket-B

Hole 1

Top

(non-coped)

end

Bottom

(coped)

end

Hole 3

Hole 1

Hole 3

Top

(non-coped)

end

Bottom

(coped)

end

Support Bracket-A

Support Bracket-B

Front Lip

Back Trough

Threaded holes

FIRST: Install the

Button Head Screws

SECOND: Install

the Wood Screws

Back Trough ﬂange

NOTE: Make certain

to install the Back

Trough in front of the

Support Brackets

Keps Nut

Button Head Screw

Keps Nut

Button Head Screw

Straight Edge

Buttress ﬂange

faces towards

the front

Cross End

Product specificaties

Merk:	Anthro
Categorie:	Bureau
Model:	Fit Standard Unit
Kleur van het product:	Zwart
Breedte:	1822.44 mm
Diepte:	717.55 mm
Hoogte:	736.59 mm
Maximale gewichtscapaciteit:	68 kg
Paneelmontage-interface:	Nee mm
Afmetingen (B x D x H):	1822.44 x 717.55 x 736.59 mm