AMX CE-IO4 Handleiding
AMX
AV extender
CE-IO4
Lees hieronder de đź“– handleiding in het Nederlandse voor AMX CE-IO4 (33 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/33
INSTRUCTION MANUAL
-CE Series Universal Control Extenders
INSTRUCTION MANUAL
CE- Series Universal Control Extenders
CE REL8-IRS4, CE COM2, CE- -IO4, CE -
IMPORTANT SAFETY INSTRUCTIONS
1.
READ these instructions.
2.
KEEP these instructions.
3.
HEED all warnings.
4.
FOLLOW all instructions.
5.
DO NOT use this apparatus near water.
6.
CLEAN ONLY with dry cloth.
7.
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
DO NOT install amplifiers) near any heat sources such as radiators, heat registers, stoves, or other apparatus (including that
produce heat.
9.
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the
provided plug into your consult does not fit outlet, an electrician for replacement of the obsolete outlet.
10.
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11.
ONLY USE attachments/accessories specified by manufacturer. the
12.
USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from over. -tip
13.
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14.
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such -as power
supply plug damaged, has cord or is liquid been spilled fallen or objects have into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate or been normally, has dropped.
15.
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on
the apparatus.
16.
To completely from the disconnect this apparatus AC Mains, disconnect the power supply cord plug from the AC receptacle.
17.
Where the mains plug the disconnect device or an appliance coupler is used as the disconnect device, shall remain readily
operable.
18.
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
19.
Please magnetic use the HDMI cable with ring.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock to persons.
ESD left indicates text regarding potential danger associated discharge Warning: The icon to the with the of static electricity from
an
outside source (such as human hands) into an integrated circuit, often resulting in damage to the circuit.
WARNING: To reduce risk the of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: No naked - flame sources such should - as candles be placed on the product.
WARNING: Equipment shall MAINS socket outlet a be connected to a with protective earthing connection.
WARNING: To risk reduce the of electric shock, grounding of the center pin of this plug must be maintained.
COPYRIGHT NOTICE
AMX© 2023, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form
or by any
means, electronic, mechanical, otherwise, photocopying, recording, or without the prior written permission of AMX. Copyright
protection to software claimed extends hardware AMX and and includes all forms and matters copyrightable material and information now
allowed by statutory or judicial
law or herein after granted, including without limitation, material generated from the software programs
which are displayed on the screen such as icons, screen display looks, etc. Reproduction or disassembly of embodied computer
programs or algorithms is expressly prohibited.
LIABILITY NOTICE
No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the
preparation of this publication, no AMX assumes responsibility liability for error or omissions. No is assumed for damages resulting from
the use of the information
contained herein. Further, this publication and features described herein are subject to change without
notice.
AMX WARRANTY AND RETURN POLICY
The AMX Warranty Return and Policy and related documents can be viewed/downloaded at www.amx.com.
ESD WARNING
WARNING:
This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or included, power supply of the product.
Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug
Adapters is cautioned because it
can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with detachable a
power cord, use only the provided with type your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage,
please contact your local distributor and/or retailer.
FCC AND CANADA EMC COMPLIANCE INFORMATION:
This device part complies with 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device not may cause harmful interference, and (2) this accept any device must interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These designed provide reasonable protection against harmful interference environment. limits are to a in commercial This
equipment generates, radiate frequency and, not uses and can radio energy if installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference occur will not in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to to try correct the interference by or one more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet a on circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Approved under of the verification provision FCC Part 15 a A as Class Digital Device.
Caution:
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device. -3 CAN ICES (B)/NMB- 3(B)
EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC
Directive 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU;
European Union WEEE (recast) Directive 2012/19/EU; European Union Radio and Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC
WEEE NOTICE:
To avoid ESD (Electrostatic Discharge) damage to make sensitive components, sure you are properly grounded before
When working with with any equipment manufactured electronic devices, proper ESD grounding procedures must be followed to
make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive smocks, and conductive
work mats are specifically designed for this purpose. These items should not be manufactured locally, since they are generally
composed of - highly resistive conductive materials to safely drain static discharges, with out increasing an electrocution risk in the
event of an accident.
Anyone performing field maintenance appropriate on AMX use an equipment should ESD field service kit complete with at
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipmentare hazardous
to - life. No user serviceable parts inside. Refer all servicing to
Place the equipment supply and sure that a near main power outlet make you
RISK OF ELECTRIC SHOCK
DO NOT OPEN
C A U T I O N
Product specificaties
| Merk: | AMX |
| Categorie: | AV extender |
| Model: | CE-IO4 |
Heb je hulp nodig?
Als je hulp nodig hebt met AMX CE-IO4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding AV extender AMX
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
14 November 2023
13 November 2023
13 November 2023
13 November 2023
13 November 2023
Handleiding AV extender
- AV extender Philips
- AV extender Abus
- AV extender Ag Neovo
- AV extender Allnet
- AV extender Audio Pro
- AV extender Belkin
- AV extender D-Link
- AV extender Digitus
- AV extender Dune
- AV extender Ebode
- AV extender Edimax
- AV extender Eminent
- AV extender Genexis
- AV extender Gigabyte
- AV extender Hama
- AV extender InFocus
- AV extender KEF
- AV extender Konig
- AV extender LevelOne
- AV extender Logilink
- AV extender Manhattan
- AV extender Marmitek
- AV extender Monacor
- AV extender Nedis
- AV extender Peerless
- AV extender Polycom
- AV extender Pyle
- AV extender Roland
- AV extender Speaka
- AV extender Teufel
- AV extender Vivotek
- AV extender One For All
- AV extender Monoprice
- AV extender Schwaiger
- AV extender Steren
- AV extender Atlona
- AV extender Trevi
- AV extender Vivolink
- AV extender Techly
- AV extender SIIG
- AV extender Tripp Lite
- AV extender Approx
- AV extender Vision
- AV extender Matrox
- AV extender Gefen
- AV extender Planet
- AV extender Intellinet
- AV extender Lindy
- AV extender IOGEAR
- AV extender Black Box
- AV extender DataVideo
- AV extender Kindermann
- AV extender Bogen
- AV extender AJA
- AV extender Marshall Electronics
- AV extender ATen
- AV extender Wentronic
- AV extender Dynaudio
- AV extender Adder
- AV extender Extron
- AV extender MIPRO
- AV extender Crestron
- AV extender I3-Technologies
- AV extender StarTech.com
- AV extender PureLink
- AV extender UTEPO
- AV extender Aitech
- AV extender Advantech
- AV extender Smart-AVI
- AV extender Kramer
- AV extender Micro Connect
- AV extender KanexPro
- AV extender Intelix
- AV extender ASSMANN Electronic
- AV extender Blustream
- AV extender Avocent
- AV extender Rose
- AV extender Accell
- AV extender Ecler
- AV extender Rose Electronics
- AV extender Epcom
- AV extender CYP
- AV extender TV One
- AV extender SmartAVI
- AV extender IMG Stage Line
- AV extender Oehlbach
- AV extender HELGI
- AV extender Liberty
- AV extender Enson
- AV extender Lightware
- AV extender SWIT
- AV extender Hall Research
- AV extender WyreStorm
- AV extender Rocstor
- AV extender MuxLab
- AV extender Seco-Larm
- AV extender ConnectPro
- AV extender Kanex
- AV extender TechLogix Networx
- AV extender C2G
- AV extender SEADA
- AV extender Comprehensive
Nieuwste handleidingen voor AV extender
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024