Aluratek AIS11F Handleiding

Aluratek Bluetooth ontvanger AIS11F

Lees hieronder de 📖 handleiding in het Nederlandse voor Aluratek AIS11F (1 pagina's) in de categorie Bluetooth ontvanger. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

iStream Universal Bluetooth Audio Receiver

aluratek.com

Quick Start Guide

AIS11F

Product Application

Operation

Note: The pairing mode will last 2 minutes. AIS11F will switch to the standby mode automatically if

no devices can be connected within 2 minutes.

Pairing with the transmitter such as iPhone, smart phone, and tablet:

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for

detail instruction. The general pairing procedures are as follows:

1. Make sure AIS11F is turned Off.

2. Activate AIS11F pairing mode by press and hold the power button for 6 seconds.

3. Activate your device’s Bluetooth function and set your device to search for Bluetooth

devices. Select AIS11F when it is found.

4. For transmitter with Bluetooth version 2.0, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

5. If prompted by your device to connect, please select “Yes”.

6. After connecting successfully, the blue LED will flash every 5 seconds.

Note: Please make sure the audio output is set to Bluetooth / AIS11F for audio streaming from the device.

For more information, please visit: http://aluratek.com/warranty-return-policy

You can register your product online at: http://aluratek.com/product-registration

E-mail: support@aluratek.com

Web: www.aluratek.com/support

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect in material or workmanship for

1 Year from the date of purchase.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

Tech Support & Warranty Information

Operation

Charging the battery

The battery is not fully charged and it is highly recommended that you charge AIS11F

before you begin using it.

Note: Using AIS11F “out of the box” will not harm the device. You will experience reduced battery

life as the unit will not be fully charged.

Connect the USB end of the cable provided to your PC and the charger plug to the

charging jack of AIS11F. Please charge the battery for a minimum of (2) hours. The Red

LED will be on while charging. When charging is complete, the red LED will turn off.

Function Operation LED Indicator

Power On Press and hold Power button for

2-3 seconds

Blue LED flashes

3 times

Enter Pairing

Mode

Ensure AIS11F is turned Off. Press and

hold Power button for 6 seconds until

LED flashes red and blue alternately

LED flashes red and

blue alternately

Power Off Press and hold Power button for

3-4 seconds

Red LED flashes

3 times

Connect the iStream to any

speaker or dock (AUX IN)

with a 3.5mm audio jack

Power button

Charge the iStream with

the included USB cable

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Stream music from your

digital device to the

iStream up to 33’ away

Product specificaties

Merk:	Aluratek
Categorie:	Bluetooth ontvanger
Model:	AIS11F
Breedte:	44 mm
Diepte:	10 mm
Hoogte:	30 mm
Stroombron:	USB/batterij
Bluetooth-versie:	2.1+EDR
Hostinterface:	3,5 mm