Aluratek ABCD54F Handleiding

Aluratek Bluetooth ontvanger ABCD54F

Lees hieronder de 📖 handleiding in het Nederlandse voor Aluratek ABCD54F (2 pagina's) in de categorie Bluetooth ontvanger. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Volume upBluetooth

Pairing

Volume down

Optical /

AUX

Select

3.5 mm

cable

RCA-Y

cable

Optical

(SPDIF)

cable OROR

Package Contents Product Highlights Product Application

Operation Operation

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Radio and TV Interference Statement

Aluratek warrants this product against defect in material or workmanship for 1 YEAR

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has

been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT

FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR

IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's

products, contents or use of this documentation and all accompanying software, and specifically

disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek

reserves the right to revise or update it's product, software or documentation without obligation to

notify any individual or entity.

Warranty

aluratek.com

model ABCD54F

Quick Start Guide

Universal Bluetooth Audio Receiver & Transmitter w/ Bluetooth 5

Technical Support

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Control Functions LED Indicators Pairing in Transmitter Mode (TX)

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for detailed

instruction. The general pairing procedures are as follows:

1. Make sure ABCD54F is switched to TX

2. Connect the USB DC input to ABCD54F

3. ABCD54F will enter pairing mode automatically with TX LED flashing rapidly (Quick

press the pairing button twice if it is not in pairing mode)

4. Activate your device’s Bluetooth function and set your device to search for Bluetooth

device.

5. Please make sure ABCD54F and the device are next to each other and they will pair

automatically

6. After connecting successfully, both “TX” and “A” LED lights will illuminate steady blue.

Your order has been carefully packaged and inspected. The following accessories should

be included in your package. Please inspect the contents of the package to ensure that

you have received all items and that nothing has been damaged. If you discover a problem,

please contact us immediately for assistance.

Operation

Pair with two devices at the same time in TX mode

In TX mode, ABCD54F is able to pair/stream to two Bluetooth stereo headphones /

speakers at the same time.

1. Follow the previous instructions in the “Pairing in Transmitter Mode” section to pair

ABCD54F with your first device.

2. Press the pairing button twice on ABCD54F to enter pairing mode

3. Power on your second device and enable Bluetooth pairing mode

4. Once connected, both “A” and “B” LED lights will illuminate steady blue

Pairing in Receiver Mode (RX)

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for detailed

instruction. The general pairing procedures are as follows:

1. Make sure ABCD54F is switched to RX

2. Connect the USB DC input to ABCD54F

3. ABCD54F will enter pairing mode automatically with RX LED flashing rapidly (Quick

press the pairing button twice if it is not in pairing mode)

4. Activate your device’s Bluetooth function and set your device to search for Bluetooth

device. Select ABCD54F when it is found

5. After connecting successfully, both “RX” and “A” LED lights will illuminate steady blue

Operation Operation

Bypass Mode Setup

This mode can be used if you just want to use the ABCD54F as a converter without

using the Bluetooth function. Slide the switch to bypass mode and connect the power

source to ABCD54F to enable the following functions: aux to aux, opt to opt etc...

To enable aptX-HD For Supported Device

While ABCD54F is on, press and hold the pairing button for 7 seconds to turn on/off

aptX-HD mode

To Clear Pairing Records

For TX mode, while ABCD54F is on, press and hold the “+” button for approximately 7

seconds until both TX and RX LED lights flash 2 times simultaneously.

TX / Bypass / RX

Mode Switch

RX TX

USB Power Cable 3.5mm Cable RCA-Y Cable Digital Optical Cable

Optical

(SPDIF)

Ports*

Micro USB DC IN Port

AUX (3.5mm) Ports

*In SPDIF mode, connect devices through SPDIF IN

for TX mode and SPDIF OUT for RX mode

Bluetooth headphones, earbuds,

and speakers

Bluetooth enabled smartphones,

tablets, desktops and laptops

Stereos and speaker docks

with an AUX IN (3.5 mm)

or RCA IN or Optical (SPDIF) IN

TVs, computers and MP3 players

with an AUX OUT (3.5 mm)

or RCA OUT or Optical (SPDIF) OUT

Use ABCD54F

as a Receiver

Use ABCD54F

as a Transmitter

3.5 mm

cable

RCA-Y

cable

Optical

(SPDIF)

cable OROR

UP TO

100’

Status

LED Indicator

Pairing Mode

Standby / Reconnect Mode

Connected with one device

Connected with two devices

Connected CODEC mode

LED “HD” shows blue

TX LED flashes rapidly (TX Mode)

RX LED flashes rapidly (RX Mode)

TX LED flashes once every 3 seconds (TX Mode)

RX LED flashes once every 3 seconds (RX Mode)

LED “A” shows blue

LED “A” and LED “B” shows blue

Button

Function

Operation Method

Pairing

Enable pairing mode

Press the pairing button twice to enter the pairing mode

Play / Pause

(in RX mode only)

Press the pairing to play / pause during music playback button

Volume + Volume + (in RX mode only)

Turn aptX-HD ON / OFF

Next song (in RX mode only

Volume - (in RX mode only)

Short press the volume+ button during music playback

Long press the volume+ button to skip to the next song

Short press volume- button during music playback

Long press volume - button to skip to the previous song

Volume -

Previous song

(in RX mode only)

Tx /Rx mode

selection

Mode switch Short press mode button to switch between OPT and AUX

Switch the button to Tx side for transmit mode / Rx side for receive mode / BYPASS

(middle) for pass through mode

Press and hold the pairing button for 7 seconds to turn

ON / OFF aptX-HD when powered on (only when you

paired with a compatible device)

LED “LL” shows blue

LED “aptX” shows blue

Above 3 LED stays off

aptX™ low latency

aptX™ HD

aptX™

SBC

Product specificaties

Merk:	Aluratek
Categorie:	Bluetooth ontvanger
Model:	ABCD54F
Kleur van het product:	Zwart
Gewicht:	120 g
Breedte:	80 mm
Diepte:	86 mm
Hoogte:	22 mm
Gebruikershandleiding:	Ja
Bluetooth:	Ja
Bluetooth-versie:	5.0
Bluetooth-profielen:	A2DP
Connectiviteitstechnologie:	Bedraad en draadloos
Ethernet LAN:	Nee
Meegeleverde kabels:	RCA
Geïntegreerde geheugenkaartlezer:	Nee
Aantal USB-aansluitingen:	1
Remote (IR) ingang:	1
Digitale audio, optische uitgang:	1
Audio-uitgangskanalen:	2.0 kanalen
Remote (IR) uitgang:	1
Bereik van Bluetooth:	30 m
Apple docking:	Nee
Digitale audio optische in:	1
Ontvanger type:	Stereo
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
AirPlay:	Nee
Phono ingang (RCA):	1
Speakers connectiviteit type:	3.5mm
Vermogen uitvoer per kanaal (20-20KHz@8 Ohm):	- W
Multichannel audio uitgang type:	RCA
Garantieperiode:	1 jaar
Multichannel audio invoer type:	RCA